This study used the Landsat 8 OLI satellite image and the supervised classification method to estimate uneven-aged forest stand parameters and land use/cover. The spatial success of classification was also investigated. The overall success rates and Kappa values of the classification were, respectively, 74.7% and 0.75 for actual structural type, 84.6% and 0.80 for crown closure, and 88.35% and 0.81 for land use class, whereas the spatial success of classification on the forest cover type map was 36.91% for actual structural type, 64.74% for crown closure, and 41.78% for land use/cover class. The results revealed that the Landsat 8 OLI image can be used to identify stand parameters and land use/cover class. However, because the spatial success rates were below 50% for the actual structural type and land use/cover class of the stand types, it is not suitable for use in spatial classification determination for these classes.
15 October 2017 in Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi
En tr Generally bark has a negative effect pulp and paper properties. In this study, paper pulp and hand sheets were produced from Wild dogwood (Cornus australis L.) using Kraft method. The cooking have been different conditions, chip / solution ratio 1/5, cooking temperature 170±2 °C by taking constant. Kraft method with the Na2S/NaOH , 18/20, 18/15, 18/10, 18/5 performed. Samples were used with and without bark in order to identify the negative impacts of the bark on pulp and paper production. In addition, it has been investigated whether the time of reaching the maximum temperature of K2 cooking is reduced from 120 minutes to 90 minutes, and the time and energy saving can be made. For all of the mechanical properties that were measured and pulp yield, the bark had a negative effect. But, this effect had not significant on mechanical properties at 95% significant level. On the other hand the bark had a negative effect on brightness and positive effects on opacity. These effects had significant at 95% significant level. Genellikle kabuk hamur ve kâğıt özelliklerine olumsuz etki yapmaktadır. Bu çalışmada, Kraft yöntemi kullanılarak Yabani kızılcık (Cornus australis L.) odunundan kâğıt hamuru ve deneme kâğıtları üretilmiştir. Pişirme yonga/çözelti oranı 1/5 ve pişirme sıcaklığı 170±2 °C sabit alınarak farklı koşullarda yapılmıştır. Kraft metodu Na2S/NaOH 18/20, 18/15, 18/10, 18/5 şartlarında gerçekleştirilmiştir. Kabuğun kâğıt hamuru ve kâğıt üretimine olumsuz etkisi olup olmadığını belirlemek için kabuksuz örneklerde en yüksek verimin elde edildiği K2 Pişirmesi kabuklu örneklerle (K5) tekrarlanmıştır. Ayrıca, K2 pişirmesinin maksimum sıcaklığa ulaşma süresi 120 dakikadan 90 dakikaya indirilerek yapılan pişirmede (K6) zaman ve enerji tasarrufu yapılıp yapılanamayacağı irdelenmiştir. Kabuk ölçülen mekanik özellikleri ve hamur verimini olumsuz etkilemiştir. Fakat bu olumsuz etki mekanik özelliklerde %95 güven aralığında belirgin değildir. Diğer taraftan, kabuk parlaklık özelliklerinde olumsuz, opaklığa olumlu etki etmiştir. Bu etkiler %95 güven düzeyinde anlamlıdır.