The transition to non-fossil fuels brings with its basic challenges in battery technologies. Due to their efficiency, one of the areas where Li-ion batteries are widely used is electric vehicles (EVs). Range estimation is one of the most important needs in a battery-powered electric vehicle (BEV). The range of BEVs directly depends on battery capacity and powertrain efficiency. Although the electrical performance of Li-ion batteries has significantly improved, it is still not possible to overcome their capacity degradation with aging. State of charge (SoC) and state of health (SoH) are two important measures for a battery. With accurate SoC and SoH estimates, a battery management system can prevent each cell in the battery pack from over-charging or over-discharging, and prolongs the life of the entire pack. The novel idea in this study is to estimate SoH with the data collected during the battery charging process. The most needed moment for SoH is the end of the charging process. With this information, the user can plan the job that the battery will be used with. In order to meet this need, a specially designed deep neural network (stacked LSTM) is trained and tested using measurements only from constant current charging phase of quick charge process. The test results show that this method is effectively applicable to quick chargers.
Verification and validation (V&V) of systems and system of systems in an industrial context has never been as important as today. The recent developments in automated cyber-physical systems, digital twin environments, and Industry 4.0 applications require effective and comprehensive V&V mechanisms. Verification and Validation of Automated Systems’ Safety and Security (VALU3S), a Horizon 2020 Electronic Components and Systems for European Leadership Joint Undertaking (ECSEL-JU) project started in May 2020, aims to create and evaluate a multi-domain V&V framework that facilitates evaluation of automated systems from component level to system level, with the aim of reducing the time and effort needed to evaluate these systems. VALU3S focuses on V&V for the requirements of safety, cybersecurity, and privacy (SCP). This paper mainly focuses on the elaboration of one of the 13 use cases of VALU3S to identify the SCP issues in an automated robot inspection cell that is being actively used for the quality control assessment of automotive body-in-white. The joint study here embarks on a collaborative approach that puts the V&V methods and workflows for the robotic arms safety trajectory planning and execution, fault injection techniques, cyber-physical security vulnerability assessment, anomaly detection, and SCP countermeasures required for remote control and inspection. The paper also presents cross-links with ECSEL-JU goals and the current advancements in the market and scientific and technological state-of-play.
Due to the fast-paced development of technology, the software has become a crucial aspect of modern life, facilitating the operation and management of hardware devices. Nevertheless, using substandard software can result in severe complications for users, putting human lives at risk. This underscores the significance of error-free and premium-quality software. Verification and validation are essential in ensuring high-quality software development; software testing is integral to this process. Although code coverage is a prevalent method for assessing the efficacy of test suites, it has some limitations. Therefore, mutation testing is proposed as a remedy to tackle these limitations. Furthermore, mutation testing is recognized as a method for directing test case creation and evaluating the effectiveness of test suites. Our proposed method involves autonomously learning mutations from faults in real-world software applications. Firstly, our approach involves extracting bug fixes at the method-level, classifying them according to mutation types, and performing code abstraction. Subsequently, the approach utilizes a deep learning technique based on neural machine translation to develop mutation models. Our method has been trained and assessed using approximately ~588k bug fix commits extracted from GitHub. The results of our experimental assessment indicate that our models can forecast mutations resembling resolved bugs in 6% to 35% of instances. The models effectively revert fixed code to its original buggy version, reproducing the original bug and generating various other buggy codes with up to 94% accuracy. More than 96% of the generated mutants also demonstrate lexical and syntactic accuracy.
The integration of Extended Reality (XR) technologies into Industry 5.0 offers innovative solutions for industrial training by overcoming the limitations of traditional methods, such as high costs, inefficiencies, and production disruptions. These technologies enable immersive and scalable training environments, providing workers with hands-on experience while minimizing risks and resource constraints. This study presents an XR-based training platform designed to enhance workforce skills in health and safety, robotic system operations, and maintenance through immersive Virtual Reality (VR) and Augmented Reality (AR) scenarios. Evaluated by 22 participants from diverse professional backgrounds, the platform achieved a 50% reduction in training time compared to conventional methods, while significantly improving skill acquisition and task efficiency. Participants rated immersive VR environments highly (4.4/5) for engagement and knowledge retention, with usability and instructions also scoring positively (4/5). Scenario-based performance showed the average scores in health and safety tasks (72 points), while robotic system operations (60 points) and maintenance (54 points) reflected increasing task complexity. Despite moderate cognitive demands, the platform effectively balanced mental effort with engagement, providing an accessible and effective training experience. These findings underscore the potential of XR technologies to transform industrial training by enhancing efficiency, safety, and scalability, aligning with the evolving needs of Industry 5.0.
Deep Neural Networks (DNNs) are used in many critical areas, such as autonomous vehicles, generative AI systems, etc. Therefore, testing DNNs is vital, especially for models used in critical areas. Mutation-based testing is a very successful technique for testing DNNs by mutating their complex structures. Deep Mutation Module was developed to address mutation-based testing and the robustness challenges of DNNs. It analyses the structures of DNNs in detail. It tests models by applying mutation to parameters and structures using its fault library. Testing DNN structures and detecting faults is a highly complex and open-ended challenge. The method proposed in this study applies mutations to DNN parameters to expose faults and weaknesses in the models, thereby testing their robustness. The paper focuses on mutation-based tests of an Reinforce Learning (RL) model developed for electric vehicle routing, a Long Short-Term Memory (LSTM) model developed for prognostic predictions, and a Transformer-based neural network model for electric vehicle routing tasks. The best mutation scores for the LSTM model were measured as 96%, 91.02%, 71.19%, and 68.77%. The test results for the RL model resulted in mutation scores of 93.20%, 72.13%, 77.47%, 79.28%, and 55.74%. The mutation scores of the Transformer model were 75.87%, 76.36%, and 74.93%. These results show that the module can successfully test the targeted models and generate mutants classified as "survived mutants" that outperform the original models. In this way, it provides critical information to researchers to improve the overall performance of the models. Conducting these tests before using them in real-world applications minimizes faults and maximizes model success.
21 December 2022 in Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi
Nowadays, camera-based perception is most popular topic in robotic systems. Verification of camera-based perception systems are crucial and difficult with current tools and methods. This study proposes Camera Fault Injection Tool (CamFITool), which enables different kind of fault injection methods to RGB and TOF cameras in order to perform verification and validation activities on robotic systems. Besides, Fault Injected Image Database which is created by CamFITool is introduced. In addition, the study guides to readers to create new datasets by injecting faults into existing image libraries or camera streams with CamFITool. As a result, CamFITool, an open-source fault injection tool, which is a critical tool for assessing of fault tolerant systems’ safety and security, is proposed. Also, a fault injected image dataset created by CamFITool for verification of camera-based perception studies in robotic systems is given.