Natural fibers have been widely employed in different fields as composite materials. However, the thermal behavior of natural materials is not fully understood since the chemical components chemically interact with each other. Put simply, the thermal degradation kinetics of natural fibers are of crucial importance in the academic and industrial fields. This study objectively fully investigated the thermal behavior of different natural fibers using the thermal kinetic method criteria, as described by the ICTAC (International Committee of Thermal Analysis and Calorimetry). The kinetic triplet (activation energy, pre-exponential factor, and reaction mechanism) was determined as a function of the conversion degree. For all plant fibers, the results indicated an autocatalytic process with an average activation energy and pre-exponential factor of 200 kJ·mol−1 and 40 s−1, respectively. The activation energy can be mainly attributed to the cellulose component, while the pre-exponential factor is due to the possible compensation effect as a mathematical artifact of the Arrhenius-based equation. Finally, the lifetime prediction of the plant fibers was estimated using the pre-determined kinetic triplet parameters to estimate the plant fiber stability under isothermal conditions.
Resumo As cerâmicas porosas podem ser utilizadas nas mais diversas aplicações, como na indústria petroquímica e na área da saúde. No entanto, é difícil produzir cerâmicas com formas complexas usando processos convencionais. Neste trabalho, diferentes termoplásticos (PEBD, ABS e PLA) foram utilizados para a extrusão de filamentos com alumina submicrométrica. Estes filamentos foram extrudados com e sem ácido esteárico que, posteriormente, foram utilizados na manufatura aditiva para a impressão de estruturas porosas (scaffolds) pelo método de fabricação por filamento fundido. Foram obtidas imagens por microscopia eletrônica de varredura das amostras com e sem o ácido esteárico, antes e após a sinterização. Estas imagens mostraram que a presença do ácido esteárico reduziu a formação de defeitos, pois além de atuar como dispersante também facilitou a posterior remoção do veículo orgânico do scaffold, antes da sinterização final.
3D printing has conquered markets on an exponential scale. Allied to this, the global demand for environmentally sustainable materials drives research in the search for a substitute for petroleum-based thermoplastics. PLA is among the main raw materials for use in 3D printing filaments and has the advantage of being a bio-based and biodegradable biopolymer. This study aimed to develop a biofilament from a mixture of periphytic biomass and PLA and to evaluate its biodegradability potential when compared to commercial filaments. The biofilament was produced with 95% PLA and 5% periphytic biomass. Scanning Electron Microscopy and FTIR spectroscopy were applied to analyze the morphological structure of the biofilament. The biofilament presented mechanical performance similar to pure PLA, becoming slightly more rigid and brittle. In the biodegradability test, the sample produced with the biofilament showed a greater mass loss, with 63.75%, when compared to the PLA samples, indicating that the presence of microalgae contributed to the degradation of the material.