Water‐resistant poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films are valuable in biomedical applications; however, they typically require crosslinkers to stabilize the films, which can introduce undesired aggregation or phase separation reactions. Herein, a dipping‐based process to prepare PEDOT:PSS films on nonplanar surfaces without crosslinker is developed. Sequential soaking of a dip‐coated PEDOT:PSS film in ethanol and water imparts water resistance to the film. Microscopic and spectroscopic techniques are used to monitor the process and confirm that the ethanol soaking elutes the excess PSS from the film bulk, which stabilizes the film prior to the water‐soaking process. The obtained films act as conductors and semiconductors on curved surfaces, including 3D‐printed objects. A film deposited on a curved surface is successfully applied as the channel layer in a neuromorphic organic electrochemical transistor. This approach can enable integrated bioelectronic and neuromorphic applications that can be readily deployed for facile prototyping.
Physical reservoir computing (PRC) harnesses the intrinsic nonlinear dynamics of physical systems for efficient temporal data processing, offering significant advantages in energy-efficient hardware implementation. This study explores the potential of oriented semiconducting polymer (SCP) thin films as reservoirs for PRC, focusing on two types of SCP benzo[c]cinnoline-based conjugated polymer diketopyrrolopyrrole benzo[c]cinnoline p(DPP-BZC) and regioregular poly(3-hexyl thiophene) (RR-P3HT). To enable anisotropic charge transport, uniaxially oriented thin films with edge-on molecular orientation were fabricated using the floating film transfer method. The films were electrically evaluated for anisotropic nonlinear responses, phase-shifting capabilities, and high-dimensional mapping in PRC tasks. Performance metrics, including waveform generation accuracy, were systematically investigated under varying device configurations and molecular structures. The study underscores the critical role of different conjugated polymers and their orientations in PRC performance, paving the way for developing next-generation materials for temporal signal processing and low-power intelligent hardware.
17 September 2024 in Advanced Electronic Materials
Material‐networked conduction paths provide nonlinear electronic properties, which are essential components of computing and physically mimic the brain. In this study, the formation of conjugated polymer monolayer networks and their nonlinear charge transport is demonstrated. Poly(3‐hexylthiophene) (P3HT) monolayer networks doped with 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane (F4TCNQ) is fabricated using the co‐spread method with an amphiphilic liquid crystal molecule at the air–water interface. Atomic force microscopy and Ultraviolet–visible–near‐infrared absorption spectroscopy measurements reveal the network surface morphologies and doped electronic states. The correlation between the nonlinear electronic characteristics and network structures of the P3HT/F4TCNQ monolayer networks is further systematically investigated through current–voltage and voltage–time measurements for various doping levels, network densities, and numbers of transferred layers. The current–voltage characteristics of the P3HT/F4TCNQ monolayer network device with a simple two‐terminal structure exhibit nonlinear and ohmic conduction behavior, which depend strongly on the network density and geometric dimension (number of transferred layers). It is concluded that the nonlinear properties arise from the limited and unique network of 2D conduction passes. This study highlights the unique features of conducting polymer monolayer networks, paving the way for neuromorphic device applications including conjugated semiconducting polymer‐based material reservoirs with controllable nanostructures.