Parallel manipulators have been successfully used for pose adjustment. However, aircraft fuselages are heavy and have complex shapes, so the existing parallel manipulators are not suitable for aircraft fuselages. For the first time, this paper presents a novel six degrees of freedom parallel manipulator for aircraft fuselages. Compared with other parallel manipulators, the presented parallel manipulator is suitable for large round parts. The Jacobi matrix of the presented parallel manipulator is derived, which is expressed by roll, pitch, and yaw. Using the derived Jacobi matrix, inverse kinematics of the presented parallel manipulator is investigated systemically. Combining Newton’s second law with Euler equations, dynamic equations of the manipulator are derived. Using the derived dynamic equations, inverse dynamics of the manipulator are also investigated systemically. For improving safety and efficiency of fuselage pose adjustment, a new trajectory planning algorithm is proposed which is based on the minimum mean force. Simulation experiment results demonstrated the ability of the trajectory planning algorithm to achieve stable movement comparable to the time-optimal trajectory planning algorithm. At the conclusion of this paper, practical applications of the presented parallel manipulator are shown.
8 October 2021 in Journal of the Chinese Institute of Engineers
In the present study, to achieve monitoring of the process of wing-fuselage docking, and a high-quality assembly, a visual and automatic wing-fuselage docking method is proposed based on heterogeneous equipment data-fusion of laser trackers and industrial cameras. First, a visual and automatic wing-fuselage automatic-docking system is proposed, which uses laser trackers, industrial cameras, a pose-adjustment mechanism and other equipment. Second, mathematical modeling of the wing-fuselage docking system is built, including the state equation of the wing-pose adjustment for wing-fuselage docking, the observation equation of the laser tracker, and the observation equation of the industrial camera. Third, a data-fusion model of heterogeneous equipment based on the weighted least-squares method is deduced. Finally, to track and estimate the control points of the wing-pose adjustment, the functional model of the wing-fuselage docking system after data fusion is used in combination with the evolutionary particle-filter algorithm.
28 May 2025 in The International Journal of Advanced Manufacturing Technology
Driven by national policies and international competitions, China’s winter sports and industry development will enter a new course. How to release the enormous potential skiing demand in China is significant to drive 300 million people to participate in winter sports and promote the development of China’s ice and snow industry, and defining the restrictive factors is a necessary prerequisite to realise the effective transformation of potential demand to actual growth power. Based on the in-depth information, this paper further analyses the influence of environmental factors on the development of winter sports. The research shows that the number of skiers about 20 times is the highest, up to 75.5 %, followed by the number of skiers about five times, up to 67.4 %. Then about ten times accounted for 48.6 %, and finally, about 15 times accounted for 37.6 %. This frequency can fully satisfy skiing enthusiasts to enjoy leisure activities, experience modern life fashion, use skiing to increase social opportunities, delight body and mind, and improve health. Based on the in-depth information, this paper reveals the shortcomings and existing environmental factors of China’s winter sports development. It provides a reference for the rational utilisation and development of ice and snow resources and the scientific and practical development of China’s winter sports.
There are many deviation sources in the assembly process of aircraft complex thin-walled structures. To get important factors that affect quality, it is crucial to diagnose the key deviation resources. The deviation transfer between deviation sources and assembly parts has the characteristics of small sample size, nonlinearity, and strong coupling, so it is difficult to diagnose the key deviation sources by constructing assembly dimension chains. Therefore, based on the deviation detection data, transfer entropy and complex network theory are introduced. Integrating the depth-first traversal algorithm with degree centrality theory, a key deviation diagnosis method for complex thin-walled structures is proposed based on weighted transfer entropy and complex networks. The application shows that key deviation sources that affect assembly quality can be accurately identified by the key deviation source diagnosis method based on complex networks and weighted transfer entropy.