The detection of methylation in DNA and RNA is essential for the diagnosis and treatment of a wide range of diseases. A one-step fabricated laser-induced graphene (LIG) electrode has received increasing attention due to its good electrical conductivity, large specific surface area, ease of miniaturization, low cost and flexibility. Herein, a potential biosensor for N6-methyladenosine (m6A-RNA) and 5-methylcystosine-single strand DNA (5mC-ssDNA) detection was designed. The aim of this paper is to address the problem of detecting the m6A-RNA and 5mC-ssDNA content in cells. By stepwise modification of gold nanoparticles (AuNPs), sulfhydryl-modified nucleic acid chains, biotin-modified antibodies, and streptavidin-modified horseradish peroxidase (SA-HRP) at the LIG electrode, the peak current responses exhibited an increase proportional to the concentration of m6A-RNA and 5mC-ssDNA in the hydrogen peroxide–hydroquinone (H2O2–HQ) system. This method demonstrated a low detection limit of 2.81 pM for m6A-RNA and 9.53 pM for 5mC-ssDNA, with a linear detection range of 0.01 nM to 10 nM for both targets. The regression equation was determined as ΔI = 4.83 log c + 12.32 (R2 = 0.9980) for m6A-RNA and ΔI = 9.82 log c + 22.09 (R2 = 0.9903) for 5mC-ssDNA. Our method has good selectivity toward different detection targets of nucleic acid chains, stability for long-term storage and consecutive scanning (RSD of 9.42% and 2.08%, respectively) and reproducibility of 5 electrodes (RSD of 6.85%). This method utilizes gold–sulfur bonding to immobilize the detection target, which improves the conductivity of the LIG electrode and introduces an amplified portion of the signal by taking advantage of antigen–antibody specific binding. Thus, dual detection of m6A-RNA and 5mC-ssDNA was realized. Importantly, this approach is successfully applied for the detection of targets in spiked samples extracted from HeLa cells, suggesting its potential for clinical applications and providing a new perspective for the development of point-of care testing (POCT) techniques.
An efficient bienzyme nanocomposite film-based biosensor for L-amino acid recognition has been developed and characterized. The biosensor was fabricated by immobilizing horseradish peroxidase (HRP) and L-amino acid oxidase (L-AAODx) in poly(toluidine blue) film (polyTB) at the surface of a multi-walled carbon nanotube (CNTs) modified glassy carbon electrode (GCE). Only L-amino acids can be electrochemically oxidized by L-AAODx in the presence of oxygen (O2) to produce hydrogen peroxide (H2O2), which can be further reduced to H2O by HRP at a low potential of −0.1 V. The concentration of L-amino acids was estimated by the reduction current of H2O2. The polyTB film, acting as the enzyme-immobilization carrier and redox mediator, accelerated electron transfer between analytes and the electrode. At the same time, CNTs with excellent conductivity and strong adsorption ability enhanced the utilization of the enzymes. The performance of this biosensor was evaluated by electrochemical techniques and it showed high selectivity and fast response for the chiral recognition of L-amino acids, including L-tryptophan (L-Trp), L-phenylalanine (L-Phe) and L-tyrosine (L-Tyr). The low potential reduced the interference of some coexisting biomolecules for the determination of the L-amino acids. The recovery of the three amino acids in milk indicated the feasibility of this biosensor for use in complex samples.