3D printing is an emerging technology in manufacturing. It is the long‐term goal of the industry to print complex and fully functional products from cell phones to vehicles. A drawback of many 3D printing technologies is rough surface finish. It is known that metals with high surface roughness severely degrade the propagation of electromagnetic waves. Presented is the first known evaluation of the electromagnetic impact of the typical surface roughness in metal parts produced by electron beam melting. Two Ku‐band (12–15 GHz) horn antennas were 3D printed, with different surface roughness, and compared to a standard horn antenna purchased from Pasternack.
1 January 2012 in Progress In Electromagnetics Research B
The total-field/scattered-field (TF/SF) formulation is a popular technique for incorporating sources into electromagnetic models like the finite-difference frequency-domain (FDFD) method. It is versatile and simplifies calculation of waves scattered from a device. In the context of FDFD, the TF/SF formulation involves modifying all of the finite-difference equations that contain field terms from both the TF and SF regions in order to make the terms compatible. While simple in concept, modifying all of the equations for arbitrarily shaped TF/SF regions is tedious and no solution has been offered in the literature to do it in a straightforward manner. This paper presents a simple and efficient technique for implementing the TF/SF formulation that allows the TF/SF regions to be any shape and of arbitrary complexity. Its simplicity and versatility are demonstrated by giving several practical examples including a diffraction grating, a waveguide problem, and a scattering problem with a cylindrical wave source.
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
31 October 2022 in IEEE Transactions on Antennas and Propagation
An algorithm is introduced for generating frequency selective surfaces (FSS) capable of conforming to any curvature while maintaining proper size, shape and spacing of the elements. Compared to traditional projection and mapping methods, the presented algorithm maintains the electromagnetic properties of the FSS array despite the curvature. The algorithm can be used to conform to radomes, parts of autonomous vehicles, or any surface. The algorithm is agnostic to both element design and surface curvature. This allows the user to design a FSS for any curved surface while maintaining its response comparable to a flat array. The algorithm outputs two standard tessellation language (STL) files, one describing the curved surface and the other the elements of the FSS placed onto the curved surface. This makes the algorithm suitable for 3D printing using systems with more than three axes or for flexible electronics. Several examples of arbitrary surfaces are shown. Lastly, the algorithm was applied to a Jerusalem-cross FSS on a non-symmetrical parabolic dome. The dimensions of the parabolic dome were chosen to test the response of the array on a rather extreme surface against a projected array on the same surface. Simulations were carried out using Ansys HFSS from the infinite array to finite arrays to confirm operation. Three test surfaces were manufactured with measured results found to be in good agreement with simulation.
1 January 2014 in Progress In Electromagnetics Research B
The finite-difference frequency-domain (FDFD) method is a very simple and powerful approach for rigorous analysis of electromagnetic structures. It may be the simplest of all methods to implement and is excellent for field visualization and for developing new ways to model devices. This paper describes a simple method for incorporating anisotropic materials with arbitrary tensors for both permittivity and permeability into the FDFD method. The algorithm is bench marked by comparing transmission and reflection results for an anisotropic guided-mode resonant filter simulated in HFSS and FDFD. The anisotropic FDFD method is then applied to a lens and cloak designed by transformation optics.
11 January 2019 in IEEE Transactions on Components, Packaging and Manufacturing Technology
For the first time, a fully three-dimensional (3D) electric circuit was modeled in a 3D environment and manufactured via an automated hybrid direct-write 3D printing process. The implications and applications of this significant achievement are enormous because it allows circuits to be designed and manufactured in virtually any form factor. To accomplish this, a custom CAD tool was programmed into an open-source modeling software to layout components and route interconnects. The custom CAD tool imports the netlist and component geometries from a schematic capture program. Components can be placed at any position and be oriented at any angle. Interconnects can meander smoothly throughout the circuit following 3D splines. The interconnects can be placed manually or automatically between components. After laying out the components and routing interconnects, the tool exports Standard Tessellation Language (STL) files of the dielectric and metal portions of the final circuit to be 3D printed. To manufacture the circuit, fused-deposition modeling (FDM) of ABS plastic and micro-dispensing (μD) of DuPont CB028 silver paste were used. To demonstrate, a functional 555 timer circuit was designed and built to flash an LED.