Electrochemical performance of the electrospun carbon nanofibers (ECNFs) electrode for all vanadium redox flow battery (VRFB) is significantly enhanced by introducing urea into the precursor solution and the subsequent thermal treatment. A novel N, O dual-doped carbon nanofibers with a series of micronanometer multiscale pores on the surface can be easily obtained by the in situ thermolysis processes of urea, which endows the electrode larger surface area, better wettability and improved electroactive sites. The electrochemical results demonstrate that the N, O co-doping ECNFs with multiscale pores shows reduced charge transfer resistance and diffusion resistance for vanadium ions redox reactions, which should be attributed to the synergy of the larger effective surface area and better electrocatalytic activity. The VRFB equipped with the novel carbon nanofibers electrode delivers a 84.6% increase of the discharge capacity and 17% amplification of the energy efficiency compared with the pristine ECNFs at 150 mA cm −2 . This simple method to construct electrodes with N, O dual-doped and micronanometer multiscale pores also paves the way to finely regulating the internal microstructure and composition of the electrodes in a variety of energy storage systems.
1 March 2022 in Journal of the Electrochemical Society
Carbon nanofibers with multi-scale pores have been easily constructed by synchronous water etching during the carbonization process of PAN nanofibers, reducing the additional consumption of energy and time. After etching by high-temperature water vapor, the fiber surface becomes more coarse, and large amounts of etched pits are formed, effectively increasing the electrode’s specific surface area and hydrophilicity. Oxygen content is also significantly increased, which may effectively increase the electrocatalytic active sites of the electrode. Electrochemical tests verified the improved electrocatalytic activity and increased effective surface area. As a result, the VRFB single cell with water vapor etched carbon nanofibers as its electrode shows higher battery efficiencies than that with pristine carbon nanofibers; the energy efficiency improves by nearly 9.4% at 200 mA·cm −2 . After 100 charge/discharge cycles, the battery efficiency has no obvious attenuation, and the capacity attenuation rate of single cycle is nearly 0.26%,suggesting a satisfactory cycling stability. This green and simple method for constructing multi-scale porous carbon nanofibers electrode is expected to achieve large-scale production of high-performance electrode materials, and can be applied in various electrochemical energy storage systems.
In the context of the global energy transition, the efficient extraction of lithium resources has become a critical link in the new energy industry chain. Addressing challenges such as poor selectivity, low adsorption capacity, and environmental concerns in extracting lithium from salt lake brines, this study developed a novel aluminum-based adsorbent/zeolite molecular sieve composite adsorbent (LiAl-LDHs/ZSM-5). The material was constructed with a hierarchical porous structure through seed-assisted synthesis of the ZSM-5 molecular sieve carrier, followed by in situ hydrothermal growth of lithium-aluminum layered double hydroxide (LiAl-LDHs). Systematic characterization via XRD, FT-IR, and SEM confirmed its crystal structure, functional group distribution, and micro-morphology. Single-factor experiments optimized key parameters (ZSM-5 : LiAl-LDHs = 1 : 2) and adsorption conditions (pH = 7, T = 25 °C, C = 10 g L−1). Kinetic analysis revealed that the adsorption conformed to the pseudo-second-order model, indicating chemisorption-dominated mechanisms. The composite demonstrated high selectivity (αLi Mg = 188.13) and recyclability in authentic salt lake brine, offering an environmentally friendly solution for exploiting high Mg2+/Li+ ratio resources.