Yuanzhao Yao

Dr. Yuanzhao Yao

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 September 2021 in Applied Physics Express
Verified
Journal Article
Open access
PDF file
SSShinji Saito
Shinji Saito
RHRei Hashimoto
Rei Hashimoto
KKKei Kaneko
Kei Kaneko
TKTsutomu Kakuno
Tsutomu Kakuno
YYYuanzhao Yao
Yuanzhao Yao
KSKazuaki Sakoda
Kazuaki Sakoda
Photonic crystal resonators with the C4v symmetry were designed and fabricated on quantum cascade lasers with a strain-compensated multiple quantum well to achieve single-mode and vertical surface emission at 4.32 μm. Their fabrication accuracy was confirmed by high-resolution reflection spectroscopy. The maximum output power was 10 mW at 77 K. A far-field pattern with a small divergence angle below 1 degree was observed. Its main peak had a donut shape, which was attributed to the spatial symmetry of the resonance mode of the photonic crystal.

30 June 2021 in Physical Review Applied
Verified
Journal Article
Open access
PDF file
SCSiti Chalimah
Siti Chalimah
YYYuanzhao Yao
Yuanzhao Yao
NINaoki Ikeda
Naoki Ikeda
KKKei Kaneko
Kei Kaneko
RHRei Hashimoto
Rei Hashimoto
KSKazuaki Sakoda
Kazuaki Sakoda
Photonic crystals (PCs) offer unique ways to control light-matter interactions. The measurement of dispersion relations is a fundamental prerequisite if we are to create various functionalities in PC devices. Angle-resolved spectroscopic techniques are commonly used for characterizing PCs that work in the visible and near-infrared regions. However, the techniques cannot be applied to the mid- and long-wavelength infrared regions due to the limited sensitivity of infrared detectors. Here, we propose an alternative approach to measuring infrared dispersion relations. We construct a high-precision angle-resolved setup compatible with a Fourier-transform spectrometer with an angle resolution as high as 0.3∘. Hence, the reflection spectra are mapped to the two-dimensional (2D) photonic band structures of In(Ga,Al)As/InP-based PC slabs, which are designed as midinfrared-PC surface-emitting lasers. We identify complex PC modes with the aid of polarization-selection rules derived by group theory. Spectral analysis makes it possible to evaluate the mode quality (Q) factors. Therefore, angle-resolved reflection is a useful way of optimizing 2D PC parameters for midinfrared devices.

19 April 2022 in Japanese Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
YYYuanzhao Yao
Yuanzhao Yao
NINaoki Ikeda
Naoki Ikeda
SCSiti Chalimah
Siti Chalimah
TKTakashi Kuroda
Takashi Kuroda
YSYoshimasa Sugimoto
Yoshimasa Sugimoto
KSKazuaki Sakoda
Kazuaki Sakoda
We fabricated surface-emitting quantum cascade lasers with photonic crystal resonators whose active layers were strain-compensated InGaAs/AlInAs multiple quantum wells to operate at 4.3 μm. We tested two kinds of square-lattice photonic crystals consisting of circular and pentagonal InGaAs cylinders as a unit structure. We examined their output power and far-field pattern to find that both of them were improved by lowering the photonic-crystal symmetry to achieve a high extraction efficiency. The maximum output power was 50 mW at 77 K and the far-field pattern was a single peak with a divergence angle smaller than 1° for the pentagonal cylinder structure. In addition, we attributed the lasing mode to a B2-symmetric (quadrupole) eigenstate on the Γ point for the circular cylinder structure by observing the polarization dependence of the far-field pattern and comparing it with calculations by the k · p perturbation method.

15 November 2023 in Journal of the Physical Society of Japan
Verified
Journal Article
Closed access
Afshan BegumAfshan Begum
Afshan Begum
YYYuanzhao Yao
Yuanzhao Yao
TKTakashi Kuroda
Takashi Kuroda
YTYoshihiko Takeda
Yoshihiko Takeda
NINaoki Ikeda
Naoki Ikeda
KSKazuaki Sakoda
Kazuaki Sakoda

27 April 2023 in Physical Review A
Verified
Journal Article
Closed access
PDF file
Afshan BegumAfshan Begum
Afshan Begum
YYYuanzhao Yao
Yuanzhao Yao
TKTakashi Kuroda
Takashi Kuroda
YTYoshihiko Takeda
Yoshihiko Takeda
NINaoki Ikeda
Naoki Ikeda
KSKazuaki Sakoda
Kazuaki Sakoda
We successfully fabricated silicon-on-insulator (SOI) photonic crystal (PhC) slabs in which electromagnetic topological band gaps and edge modes were materialized for symmetric transverse-electric-like modes. Because the structure of our specimens can be regarded as symmetric about the horizontal middle plane of the PhC slab, their symmetric and antisymmetric eigenmodes were rigorously separated, so we could achieve genuine photonic band gaps for the former. We fabricated those specimens by electron beam lithography of the top Si layer of SOI wafers and successive plasma-enhanced chemical vapor deposition of a SiO2 capping layer. We confirmed the complete common band gap of topologically trivial and nontrivial PhCs and the topological edge modes on the boundary between them by angle-resolved reflection spectroscopy in the mid-infrared range. This is an observation of the common band gap and edge modes that materialized in symmetric PhC slabs without a membrane structure, that is, without the etching of a sacrificial layer under the PhC to increase the refractive-index contrast and the width of the common band gap.

18 February 2022 in Journal of Nonlinear Optical Physics & Materials
Verified
Journal Article
Open access
SCSiti Chalimah
Siti Chalimah
YYYuanzhao Yao
Yuanzhao Yao
NINaoki Ikeda
Naoki Ikeda
Afshan BegumAfshan Begum
Afshan Begum
KKKei Kaneko
Kei Kaneko
KSKazuaki Sakoda
Kazuaki Sakoda
We study the angle-dependent reflection spectra of two-dimensional photonic crystal (PC) slabs, which we use for developing mid-infrared surface-emitting lasers. The PC design produces a perfect resonance between material gain frequencies and the Γ -point band edge in the first Brillouin zone. Hence, we expect laser emission to occur in a direction normal to the slab surface. We fabricate PC slabs, which consist of a square lattice of nanopillars with different lateral cross-sections, i.e., circles, triangles, and pentagons, and discuss their impact on the mode characteristics. We consider that our angle-resolved spectroscopic technique will be useful for characterizing mid-infrared PC slabs to be used in vertical surface-emitting quantum cascade lasers.