Effective feature extraction is crucial for accurate fault diagnosis of rolling bearings. A novel feature extraction method called hierarchical dispersion entropy (HDE) based on hierarchical analysis is proposed in this study. The proposed method includes the following three steps: 1) bearing vibration signal is decomposed into a series of subband signal components; 2) dispersion entropies of the components in different frequency bands are calculated as the original feature vector; and 3) joint approximate diagonalization of eigenmatrices (JADE) is used to extract fusion features from the original features. The main contributions of the proposed method are as follows: 1) the HDE method can characterize the complexity and uncertainty of the signal in full frequency band; 2) the JADE method further eliminates redundant information while greatly retaining fault-relevant information; and 3) the proposed method combines the advantages of HDE's hierarchical analysis and JADE's information fusion capabilities, so the fusion features extracted by the proposed method can be more effective for the establishment of fault pattern identification model. In the analysis of two experimental cases, the feature extracted by the proposed method shows better feature clustering effect and higher recognition rate than other methods. The results show that compared with other methods, the proposed method can more accurately characterize the health condition of the bearing.
A feature extraction method named improved multi-scale entropy (IMSE) is proposed for rolling bearing fault diagnosis. This method could overcome information leakage in calculating the similarity of machinery systems, which is based on Pythagorean Theorem and similarity criterion. Features extracted from bearings under different conditions using IMSE are identified by the support vector machine (SVM) classifier. Experimental results show that the proposed method can extract the status information of the bearing. Compared with the multi-scale entropy (MSE) and sample entropy (SE) methods, the identification accuracy of the features extracted by IMSE is improved as well.
The idea of track-side acoustic detection technology is to extract fault-related information from the sound signal emitted by train bearings collected by microphones installed on sides of the railway. The signal distortion caused by the Doppler Effect is a barrier for efficient fault diagnosis. Currently, signal correction is the main way to solve this problem. Alternatively, this study attempts to directly construct the functional relationship between the Doppler-shifted signal and the diagnosis decision. Specifically, a two-stage parameters-driven learning model named KPD-SRM/KPD-BPNN is proposed, which provides a novel way for track-side acoustic fault diagnosis and it has the following merits: (1) This is a breakthrough to the existing methods based on signal correction, the diagnosis decision does not require signal correction as a prerequisite; (2) With the employment of machine learning methods, historical data can be used to improve the diagnostic accuracy and it will be continuously improved along with the increase in monitoring samples; (3) The proposed two-stage learning model can solve the problem of sample imbalance, so it has a good prospect of practical engineering application. Both simulation and experimental analysis prove the effectiveness of the proposed method.
3 August 2020 in IEEE Transactions on Instrumentation and Measurement
Vibration analysis is proved effective for bearing performance degradation assessment (PDA). In most of the current studies, vibration signals from one monitored bearing is collected and analyzed. However, in the real industrial applications, bearings in pairs or even more are often mounted on the same shaft. So the collected vibration signal is actually a mixed signal from multiple bearings. In this study, our recently developed method named KJADE is investigated for PDA under this situation. Due to the nonlinear mapping capability of the kernel method and the blind source separation ability of the JADE algorithm, the proposed method could extract latent source features that accurately reflecting the performance degradation from the mixed vibration signal. The method includes the following three steps: (1) Statistical features are calculated and transformed into the high-dimension through nonlinear mapping. (2) Latent source features are obtained by exploiting the 4th-order moments. (3) The two-class model (SS) is proposed to assess the difference between the monitored sample and the healthy sample, which could reflect the bearing health condition. Effectiveness of this method is verified using two experimental cases within four coaxial bearings. Comparative results show that the proposed method could identify the defect earlier than the traditional RMS feature as well as the traditional JADE method and the PCA method.
1 December 2021 in Sensors and Actuators A: Physical