To warn the cascading failures caused by cyberattacks (CFCAs) in real time and reduce their damage on cyber-physical power systems (CPPSs), a novel early warning method based on attack gains and cost principle (AGCP) is proposed. Firstly, according to the CFCA characteristics, the leading role of attackers in the whole evolutionary process is discussed. The breaking out of a CFCA is deduced based on the AGCP from the view of attackers, and the priority order of all CFCAs is then provided. Then, the method to calculate the probability of CFCAs is proposed, and an early warning model for CFCA is designed. Finally, to verify the effectiveness of this method, a variety of CFCAs are simulated in a local CPPS model based on the IEEE 39-bus system. The experimental results demonstrate that this method can be used as a reliable assistant analysis technology to facilitate early warning of CFCAs.

The widespread application of terminal sensors in power pipe galleries (PPGs) has significantly improved our ability to monitor power equipment status. However, the difficulties in battery replacement caused by confined space and energy loss caused by communication conflicts between sensors due to existing low-power communication strategies results in a lack of reliable energy supply for terminal sensors. In this context, a low-power communication strategy for terminal sensors is proposed. Firstly, a demand analysis is conducted on the status monitoring of PPGs, and a technical framework for low-power communication of terminal sensors is proposed. Afterward, a system model for the low-power communication of terminal sensors is established based on cognitive backscatter technology. Subsequently, key technologies, such as RF energy harvesting of terminal sensors and distance–energy level coupling analysis, are proposed to achieve continuous energy supply and avoid communication conflicts in the system model. Finally, a wireless communication simulation environment for PPGs is established to simulate the status monitoring process, based on terminal sensors, in order to verify the effectiveness of the proposed method.