High-entropy alloys have attracted widespread attention from researchers worldwide due to their unique microstructure and outstanding mechanical properties, making them a prominent focus in the field of metallurgy. Among the various high-entropy alloys, the CoCrCuNi system was among the first alloys discovered, and it has shown significant progress in development. By employing different preparation and heat treatment processes, researchers have obtained alloys with diverse performances. The addition of various alloying elements or other components can lead to pronounced variations in the properties of CoCrCuNi high-entropy alloys. This work provides a comprehensive review of recent research progress on CoCrCuNi high-entropy alloys. It covers the preparation methods, thermodynamic and kinetic simulation calculations, as well as discussions on heat treatment processes and the influence of alloying elements on the microstructure and mechanical properties of CoCrCuNi high-entropy alloys. Finally, the review concludes with a prospective analysis and predictions for the potential applications and future directions in developing novel high-entropy alloys.

The Al-Si alloy prepared by the traditional powder metallurgy method has the problems of difficult sintering and low mechanical properties. In this paper, rotary extrusion combined with rapid solidification/powder metallurgy technology (RS/PM) is proposed and designed to produce an Al-10Si alloy. In subsequent sintering at different temperatures, better metallurgical bonding between particles can be achieved to fulfil the aim of improving the mechanical properties of the material. Additionally, the continuous preparation of materials can be achieved. Finally, it is verified that the density of the Al-10Si alloy sintered at 525 °C is 2.61 g/cm³, reaching 97.0% of the theoretical density, and the tensile strength reaches 336 MPa, which is much higher than that of the alloy prepared by the traditional casting method and powder metallurgy method.

A new type of highly sensitive electrochemical sensor for the detection of dopamine (DA) and uric acid (UA) was constructed by using organic framework (COF) and multi-walled carbon nanotubes (MWCNTs) as the core building units.