Double perovskite oxides with mixed ionic and electronic conductors (MIECs) have been widely investigated as cathode materials for solid oxide fuel cells (SOFCs). Classical Fe-based double perovskites, due to their inherent low electronic and oxygen ionic conductivity, usually exhibit poor electrocatalytic activity. The existence of various valence states of B-site ions modifies the material’s catalytic activity, indicating the possibility of the partial substitution of Fe by higher-valence ions. LaBaFe2−xMoxO5+δ (x = 0, 0.03, 0.05, 0.07, 0.1, LBFMx) is used as intermediate-temperature solid oxide fuel cell (IT-SOFC) cathode materials. At a doping concentration above 0.1, the Mo substitution enhanced the cell volume, and the lattice expansion caused the formation of the impurity phase, BaMoO4. Compared with the parent material, Mo doping can regulate the oxygen vacancy concentration and accelerate the oxygen reduction reaction process to improve the electrochemical performance, as well as having a suitable coefficient of thermal expansion and excellent electrode stability. LaBaFe1.9Mo0.1O5+δ is a promising cathode material for IT-SOFC, which shows an excellent electrochemical performance, with this being demonstrated by having the lowest polarization resistance value of 0.017 Ω·cm2 at 800 °C, and the peak power density (PPD) of anode-supported single-cell LBFM0.1|CGO|NiO+CGO reaching 599 mW·cm−2.
Mixed oxygen ion and electron-conducting materials are viable cathodes for solid oxide fuel cells due to their excellent oxygen transport kinetics and mixed electrical conductivity, which ensure highly efficient operation at low and medium temperatures. However, iron-based double perovskite oxides usually exhibit poor electrocatalytic activity due to low electron and oxygen ion conductivity. In this paper, Ca is doped in PrBaFe2O5+δ A-site to improve the electrochemical performance of PrBaFe2O5+δ. Results show that replacing Pr with Ca does not change the crystal structure, and the Ca doping effectively increases the adsorbed oxygen content and accelerates the migration and diffusion rate of O2− to the electrolyte|cathode interface. The polarization resistance of the symmetric cell PC0.15BF|CGO|PC0.15BF is 0.033 Ω·cm2 at 800 °C, which is about 56% lower than that of PBF, confirming the enhancement of the mixed conduction of oxygen ions and electrons. In addition, the anode-supported single cell has a peak power density of 512 mW·cm−2 at 800 °C.