Watershed hydrology may face more difficulties in future due to changes in flow patterns, water-balance partitioning, and drought-related dynamics forced by climate change. This study uses a multi-model CMIP6 framework linked with SWAT hydrological modelling to examine climate change-induced hydrological responses and implications for drought behaviour in the Seonath Basin. A compromise-programming technique was used to evaluate 13CMIP6-GCMs, and MPI-ESM1-2-HR emerged as the most suitable model for recreating historical temperature and precipitation. A calibrated SWAT model was developed by bias-corrected projections under the SSP2-4.5 scenario that performed well during calibration (R²=0.87–0.91; NSE=0.86–0.90). Future climate simulations indicate substantial hydrological reorganization. A 15% increase in mean annual precipitation (1189 → 1365 mm) results in a 78% increase in surface runoff (218 → 389 mm), a more than fourfold increase in percolation to the shallow aquifer (62 → 321 mm), and an increase in deep aquifer recharge from 3.1 mm to 16.1 mm. Streamflow-to-precipitation rises from 0.25 to 0.43 while evapotranspiration-to-precipitation rises from 0.70 to 0.38, according to water-balance ratios at the basin outflow, suggesting faster hydrological performance and shorter soil-water residence times. Under situations of increased rainfall, the percolation-to-precipitation ratio rises significantly from 0.05 to 0.24, indicating improved subsurface routing.
3 September 2026 in Journal of Applied Water Engineering and Research
1. One of the most important hydroclimatic regions on Earth, the Greater Himalayas, sometimes known as the ‘Third Pole,’ provides freshwater security for a significant portion of South Asia (Das an...
This research centers on the formulation and evaluation of a simplified inverse thermal analysis framework employing numerical techniques based on discretized elements. Experiments were carried out using Stainless Steel 304 (SS304) material to evaluate the effectiveness of the proposed inverse heat transfer technique. This study aims to evaluate the heat produced by friction at the interface of metallic surfaces under dry sliding conditions. Temperature data were collected at 3 mm and 7 mm from the interface using a pin-on-disk setup. The model integrates FEM with Beck’s algorithm for heat flux estimation. To validate the model predictions, transient thermal analysis was performed using ANSYS Workbench.