This paper considers the problem of robust reconstruction of simultaneous actuator and sensor faults for a class of uncertain Takagi-Sugeno nonlinear systems with unmeasurable premise variables. The proposed fault reconstruction and estimation design method with H∞ performance is used to reconstruct both actuator and sensor faults when the latter are transformed into pseudo-actuator faults by introducing a simple filter. The main contribution is to develop a sliding mode observer (SMO) with two discontinuous terms to solve the problem of simultaneous faults. Sufficient stability conditions in terms linear matrix inequalities are achieved to guarantee the stability of the state estimation error. The observer gains are obtained by solving a convex multiobjective optimization problem. Simulation examples are given to illustrate the performance of the proposed observe
This article deals with the sliding mode fault‐tolerant control (FTC) problem for a nonlinear system described under Takagi‐Sugeno (T‐S) fuzzy representation. In particular, the nonlinear system is corrupted with multiplicative actuator faults, process faults, and uncertainties. We start by constructing the separated FTC design to ensure robust stability of the closed‐loop nonlinear system. First, we propose to conceive an adaptive observer in order to estimate nonlinear system states, as well as robust multiplicative fault estimation. The novelty of the proposed approach is that the observer gains are obtained by solving the multiobjective linear matrix inequality (LMI) optimization problem. Second, an adaptive sliding mode controller is suggested to offer a solution to stabilize the closed‐loop system despite the occurrence of real fault effects. Compared with the separated FTC, this paper provides an integrated sliding mode FTC in order to achieve an optimal robustness interaction between observer and controller models. Thus, in a single‐step LMI formulation, sufficient conditions are developed with multiobjective optimization performances to guarantee the stability of the closed‐loop system. At last, nonlinear simulation results are given to illustrate the effectiveness of the proposed FTC to treat multiplicative faults.
24 June 2019 in Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering
The present article deals with adaptive sliding mode fault tolerant control design for uncertain nonlinear systems, affected by multiplicative faults, that is described under Takagi–Sugeno fuzzy representation. First, we propose to conceive robust adaptive observer in order to achieve states and multiplicative faults estimation in the presence of nonlinear system uncertainties. Under the nonlinear Lipschitz condition, the observer gains are attained by solving the multi-objective optimization problem. Second, sliding mode controller is suggested to offer a solution of the closed-loop system stability even the occurrence of real fault effects. The main objective is to compensate multiplicative fault effects based on output feedback information. Sufficient conditions are developed with performances and expressed as a set of linear matrix inequalities subject to compute controller gains. Finally, simulation results, using the nonlinear model of a single-link flexible joint robot system, are given to illustrate the capability of the suggested fault tolerant control strategy to treat multiplicative faults.
This paper presents a robust sliding mode fault-tolerant control (FTC) strategy for a class of linear parameter variant (LPV) systems with variable time-delays and uncertainties. First fault estimation (FE) is conducted using a robust sliding mode observer, synthesized to simultaneously estimate the states and actuator faults of LPV polytopic delayed systems. Second, a sliding mode FTC is developed, ensuring all states of the closed-loop system converge to the origin. This paper presents an integrated sliding mode FTC strategy to achieve optimal robustness between the observer and controller models. The integrated design approach offers several advantages over traditional separated FTC methods. Our novel approach is based on incorporating adaptive law into the design of the Lyapunov–Krasovskii functional to improve both robustness and performance. This is achieved by combining the concept of sliding mode control (SMC) with the Lyapunov–Krasovskii function under the criteria, which plays a key role in guaranteeing the stability of this class of system. The effectiveness of the proposed method is demonstrated through a diesel engine example, which highlights the validity and benefits of the integrated and separated FTC strategy for uncertain nonlinear systems with time delays and the sliding mode control.
1 January 2023 in Mathematical Problems in Engineering
In this article, an adaptive sliding mode fault tolerant control (FTC) is improved in the case of uncertain nonlinear system which is affected by both multiplicative and additive faults in actuator. Especially, when the nonlinear system is modeled by Takagi–Sugeno (T‐S) fuzzy system with local nonlinear model. The main contribution of this paper is developing a model of multiplicative faults, which offers a more realistic dynamic evolution of the actuator degradation. The degradation process is modeled by Wiener process and estimated by the maximum likelihood estimation (MLE). Sliding mode observer (SMO) is conceived to realize the additive actuator faults using convex multiobjective optimization. On these bases, the estimated multiplicative and additive actuator faults are used to design the adaptive sliding mode controller (SMC). Finally, the proposed fault‐tolerant control scheme is demonstrated by the results of inverted pendulum system simulation.