A compact low-profile all-textile multiband antenna operating in the 2.45/5.8 GHz ISM bands, mobile WiMAX IEEE 802.16 2005 (3.3–3.4 GHz), and 5G sub-6 NR frequency band n77 (3.85–4.0 GHz) is proposed for wireless body-area network (WBAN) applications. Good broadside radiations are achieved by properly activating the inherent TM 11 , TM 21, and TM 31 modes of a circular patch antenna. An elliptical slot and a C-shaped slot are employed to tune the three modes to the desired operating frequencies. A rectangular slot is used to reduce undesirable depression in the 5.8 GHz radiation pattern. The proposed antenna is fabricated from a conductive fabric layer integrated onto a single layer of denim, making it extremely low-profile and suitable for wearable applications. It has an overall size of 60 × 60 × 1.17 mm (0.64 λg × 0.64 λg × 0.0125 λg at 2.45 GHz). The measured maximum realized gains and bandwidth at the four frequencies are −0.81, −2.81, −1.16, 2.83 dBi, and 90, 190, 230, 570 MHz, respectively. Test results show that when the antenna is placed on and bent around a human arm model, the reflection coefficient has only slight influence. Since the antenna adopts full ground plane structure, the SAR values are far below the EU standard of 2 W/kg limit. With merit characteristics, the proposed design indicates a promising candidate for WBAN applications.
24 April 2018 in IEEE Transactions on Antennas and Propagation
A methodology for modeling the Far Field (FF) radiated by antennas subject to random variabilities with surrogate models of high efficiency is presented herein. The FF is expanded onto Vector Spherical Harmonics, then the stochastic variability of their coefficients is quantitatively modeled with the Polynomial Chaos expansion. The accuracy of the surrogate model is guaranteed by a robust and efficient adaptive procedure; “extreme parsimony” of the model is achieved thanks to various “compression” techniques; moreover, the characterization of the antenna’s frequency behavior over a band of interest has been taken into account in the modeling for the first time. The methodology is applied to a practical wearable textile patch antenna designed to cover the 2.4 – 2.5 GHz band and which is subject to five geometric and material random parameters. Specifically, the “Weierstrass” curves crumpling effect is modeled for the first time. Comparison to the full-wave simulations shows that the derived surrogate model predicts the FF with good accuracy and with a speed up factor of 105. Such type of surrogate models could be beneficial not only for antenna design and optimization purpose, but also, e.g., for joint antenna-channel stochastic analyses.
A dual-polarized communication rectenna array with high isolation and low cross polarization for simultaneous wireless information and power transmission (SWIPT) is presented. It consists of a 2×2 element receiving antenna array and a high efficiency rectifier based on voltage doubler topology. The receiving element is corner-fed to achieve high isolation of more than 20 dB between the dual-polarized ports, which guarantees low mutual interference between the communication and the rectifying ports. To receive enough electromagnetic (EM) wave for rectifying and meanwhile meet the communication sensitivity, this 2×2 array uses its 2×2 vertical polarization ports and 1×2 horizontal polarization ports for power rectifying, and the rest 1×2 horizontal polarization ports for communication. For the communication port, the measured gain is 10.9 dBi and the cross polarization is less than –20 dB. The performance of the whole communication rectenna array has been measured, where a 2×4 circularlypolarized array with a gain of 17.5 dBi, settled 1 meter away is used as the transmitter. Measured results show that the system achieves a peak microwave – direct circuit (mw-dc) conversion efficiency of 74.9 % for the CW signal, and 67 % for the QPSK signal with 10 MHz channel bandwidth on the load of 345 Ω at 2.58 GHz operating frequency.
In this paper, a polarization-insensitive metasurface, harvesting electromagnetic (EM) energy with high efficiency and frequency stability over a wide range of incidence angles, is proposed. The previously reported metasurfaces suffer from their maximum efficiencies shifting with the frequency when the incidence angle increases. By introducing a square-shaped metal via ring around the elements, the mutual coupling among adjacent cells is reduced so that the proposed metasurface can maintain maximum efficiency at the fixed operation frequency over a wide range of incidence angles. Furthermore, with one single harvesting via in the proper position for the connection of a harvesting load, the metasurface can collect EM energy effectively with both transverse electric (TE) and transverse magnetic (TM) polarizations in one single harvesting load. Compared with the reported metasurfaces, this proposed metasurface has a higher efficiency and fixed operation frequency within a wide incidence range. The energy distribution, harvesting efficiency, and surface current are simulated to investigate the operation mechanism of the proposed metasurface. The simulation results show that the maximum harvesting efficiency is 91% at 5.8 GHz for both TE and TM polarizations at the normal incidence. When the incident angle increases to 75°, the maximum efficiency is achieved at 5.79 GHz (0.19% shift), and the maximum efficiencies of TM and TE polarizations are 91% and 68%, respectively. A 5 × 5 array is fabricated and tested. The experimental results are in good agreement with the simulated ones.
6 January 2025 in IEEE Antennas and Wireless Propagation Letters
A miniaturized dual-polarized patch antenna with high isolation and low cross-polarization is presented in this paper. The antenna is printed on two substrate layers with three metallic layers. The square patch on the top is fed orthogonality by two probes for dual-polarized radiation with TM 10 and TM 01 modes. A thin metallic strip is cut off from every radiation edge and loaded by a via row. The electromagnetic waves of two modes are radiated from the gaps between metallic strips and the square patch, and become more concentrated and symmetric, which reduces the cross-polarization and improve the port isolation. By introducing the interdigital structure in the radiation slots, the patch is miniaturized with an electrical size of 0.23×0.23×0.07 λ 03 ( λ 0 is the free-space wavelength at center frequency), which is about 71% area of a conventional square patch antenna. The measured results show that the isolation is greater than 46 dB and the cross-polarization less than -42 dB at the operating frequency of 5.8 GHz. This antenna also has the function of harmonic suppression. The good advantages and miniaturized size make the proposed antenna a preferable choice for various wireless communication systems.
A novel 2.4 GHz high-efficiency rectifier circuit suitable for working under very-low-input electromagnetic (EM) power conditions (−20 to −10 dBm) is proposed for typical indoor power harvesting. The circuit features a SMS7630 Schottky diode in a series with a voltage booster circuit at the front end and a direct-current (DC)-pass filter at the back end. The voltage booster circuit consists of an asymmetric coupled transmission line (CTL) and a high-impedance microstrip line (of 100 Ω instead of 50 Ω) to significantly increase the potential at the diode’s input, thereby enabling the diode to operate effectively even in very-low-power environments. The experimental measurements show that the microwave direct-current (MW-DC) conversion efficiency of the rectifier circuit reaches 31.1% at a −20 dBm input power and 62.4% at a −10 dBm input power, representing a 7.4% improvement compared to that of the state of the art. Furthermore, the rectifier circuit successfully shifts the input power level corresponding to the peak rectification efficiency from 0 dBm down to −10 dBm. This design is a promising candidate for powering low-energy wireless sensors in typical indoor environments (e.g., the home or office) with low EM energy density.