Weak L1 signal acquisition in a high dynamic environment primarily faces a challenge: the integration peak is negatively influenced by the possible bit sig
22 April 2020 in IEEE Transactions on Aerospace and Electronic Systems
During signal acquisition In a global navigation satellite system (GNSS) acquisition stage, a method of signal parameters estimation with low computational complexity is needed. However, due to the influence of sign transitions, the correct peak corresponding to the signal parameters is difficult to detect. For the estimation of the code phase of the received signal in the presence of sign transitions with low computational complexity, an acquisition method based on a complex signal phase (AMCSP) is proposed. The problem of estimating the sign transition position and the code phase is transformed into a problem of solving for a complex signal phase. Special block matrixes are constructed to obtain the complex signal phase, and integration processing is utilized to improve the detection probability performance. Based on an analysis of undesirable cases, a final code phase estimation process is proposed. Furthermore, expressions for the detection performance and computational complexity of AMCSP are derived. Simulation results demonstrate that the computational cost of AMCSP is much lower than that of a fast Fourier transform (FFT)-based method.
In order to meet the increasing demand for frequency resources for sensors, spectrum sensing has been proposed to improve the utilization of spectrum resources in cognitive wireless sensor networks (CWSNs). Therefore, spectrum sensing-enabled sensors can detect spectrum resources that are not used by the primary users (PUs) in CWSNs. To accurately detect the state of the PU signal and avoid harmful interference in a very short period, we propose a spectrum sensing problem in a CWSN model and evaluate the local spectrum sensing performance of the sensor. Furthermore, the tradeoff problem between detection delay and false alarm probability is also proposed and analyzed. In addition, we propose a probability maximizing (PM) approach to estimate the change point according to previous sensing information and maximize the stopping sensing probability to find the optimal sensing time. Finally, simulation results show that compared to the traditional convex optimization approach, the proposed PM exhibits outstanding performance in terms of the global false alarm probability, while achieving significant throughput in a shorter sensing time.
7 July 2022 in International Journal of Antennas and Propagation
To improve frequency accuracy which is affected by two parameters in high-dynamic acquisition, we propose a two-step frequency estimation method based on the mean frequency (MF) model for high-dynamic parameters estimation. The first step is based on the discrete chirp-Fourier transform (DCFT) for coarse MF estimation, where the MF accuracy and frequency search step are derived. In the second step, the maximum likelihood estimation process (MLEP) is adopted for fine MF estimation. Compared with state-of-art methods, it is verified that the two-step method can improve the detection probability in coarse MF estimation and improve the MF accuracy with low computational burdens under conditions with a moderate signal-to-noise ratio (SNR).
23 December 2025 in IEEE Internet of Things Journal
To address the decline in positioning accuracy caused by long-term GNSS observation outages under tightly coupled (TC) in urban canyons, this paper proposes a pseudorange compensation mechanism based on a bidirectional long short-term memory network with multi-scale convolutional attention (BiLSTM-MSCA). Under frequent occlusion of satellite signals, the proposed network is used to learn the pseudorange incremental relationship between INS information and GNSS signals, and then compensate for the GNSS pseudorange observations. The proposed BiLSTM-MSCA utilizes the bidirectional information of input INS and GNSS signals in the time domain and enhances the extraction of key information to improve the prediction accuracy of the network. Experiments based on the measured data of urban canyons show that the horizontal positioning accuracy of the proposed method is improved by 20 % compared with the existing neural network assisted method under the condition of 100s GNSS observation loss.