Clara Saraceno

Mrs. Clara Saraceno


Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2012 in Optics Express
Verified
Journal Article
Closed access
PDF file
CSClara Saraceno
Clara Saraceno
FEFlorian Emaury
Florian Emaury
OHOliver H. Heckl
Oliver H. Heckl
CBCyrill R. E. Baer
Cyrill R. E. Baer
MHMartin Hoffmann
Martin Hoffmann
UKUrsula Keller
Ursula Keller
We present an ultrafast thin disk laser that generates an average output power of 275 W, which is higher than any other modelocked laser oscillator. It is based on the gain material Yb:YAG and operates at a pulse duration of 583 fs and a repetition rate of 16.3 MHz resulting in a pulse energy of 16.9 μJ and a peak power of 25.6 MW. A SESAM designed for high damage threshold initiated and stabilized soliton modelocking. We reduced the nonlinearity of the atmosphere inside the cavity by several orders of magnitude by operating the oscillator in a vacuum environment. Thus soliton modelocking was achieved at moderate amounts of self-phase modulation and negative group delay dispersion. Our approach opens a new avenue for power scaling femtosecond oscillators to the kW level.

16 December 2013 in Optics Letters
Verified
Journal Article
Closed access
PDF file
CSClara Saraceno
Clara Saraceno
FEFlorian Emaury
Florian Emaury
CSCinia Schriber
Cinia Schriber
MHMartin Hoffmann
Martin Hoffmann
MGMatthias Golling
Matthias Golling
UKUrsula Keller
Ursula Keller
We present a semiconductor saturable absorber mirror (SESAM) mode-locked thin-disk laser generating 80 μJ of pulse energy without additional amplification. This laser oscillator operates at a repetition rate of 3.03 MHz and delivers up to 242 W of average output power with a pulse duration of 1.07 ps, resulting in an output peak power of 66 MW. In order to minimize the parasitic nonlinearity of the air inside the laser cavity, the oscillator was operated in a vacuum environment. To start and stabilize soliton mode locking, we used an optimized high-damage threshold, low-loss SESAM. With this new milestone result, we have successfully scaled the pulse energy of ultrafast laser oscillators to a new performance regime and can predict that pulse energies of several hundreds of microjoules will become possible in the near future. Such lasers are interesting for both industrial and scientific applications, for example for precise micromachining and attosecond science.

15 September 2009 in Applied Physics B
Verified
Journal Article
Open access
PDF file
TST. Südmeyer
T. Südmeyer
CKC. Kränkel
C. Kränkel
CBC. R. E. Baer
C. R. E. Baer
OHO. H. Heckl
O. H. Heckl
CSClara Saraceno
Clara Saraceno
UKU. Keller
U. Keller
Ultrafast thin disk laser oscillators achieve the highest average output powers and pulse energies of any mode-locked laser oscillator technology. The thin disk concept avoids thermal problems occurring in conventional high-power rod or slab lasers and enables high-power TEM00 operation with broadband gain materials. Stable and self-starting passive pulse formation is achieved with semiconductor saturable absorber mirrors (SESAMs). The key components of ultrafast thin disk lasers, such as gain material, SESAM, and dispersive cavity mirrors, are all used in reflection. This is an advantage for the generation of ultrashort pulses with excellent temporal, spectral, and spatial properties because the pulses are not affected by large nonlinearities in the oscillator. Output powers close to 100 W and pulse energies above 10 μJ are directly obtained without any additional amplification, which makes these lasers interesting for a growing number of industrial and scientific applications such as material processing or driving experiments in high-field science. Ultrafast thin disk lasers are based on a power-scalable concept, and substantially higher power levels appear feasible. However, both the highest power levels and pulse energies are currently only achieved with Yb:YAG as the gain material, which limits the gain bandwidth and therefore the achievable pulse duration to 700 to 800 fs in efficient thin disk operation. Other Yb-doped gain materials exhibit a larger gain bandwidth and support shorter pulse durations. It is important to evaluate their suitability for power scaling in the thin disk laser geometry. In this paper, we review the development of ultrafast thin disk lasers with shorter pulse durations. We discuss the requirements on the gain materials and compare different Yb-doped host materials. The recently developed sesquioxide materials are particularly promising as they enabled the highest optical-to-optical efficiency (43%) and shortest pulse duration (227 fs) ever achieved with a mode-locked thin disk laser.

30 June 2010 in Optics Letters
Verified
Journal Article
Closed access
PDF file
CBCyrill Roman Emmanuel Baer
Cyrill Roman Emmanuel Baer
CKChristian Kränkel
Christian Kränkel
CSClara Saraceno
Clara Saraceno
OHOliver Hubert Heckl
Oliver Hubert Heckl
MGMatthias Golling
Matthias Golling
UKUrsula Keller
Ursula Keller
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.

1 January 2012 in IEEE Journal of Selected Topics in Quantum Electronics
Verified
Journal Article
Closed access
CSClara Saraceno
Clara Saraceno
CSC. Schriber
C. Schriber
MMM. Mangold
M. Mangold
MHM. Hoffmann
M. Hoffmann
OHO. H. Heckl
O. H. Heckl
UKU. Keller
U. Keller
We present for the first time to the best of our knowledge a systematic study of lifetime and damage of semiconductor saturable absorber mirrors (SESAMs) designed for operation in high-power oscillators. We characterize and compare nonlinear reflectivity and inverse saturable absorption (ISA) parameters as well as damage threshold and lifetime of different representative SESAMs under test using a nonlinear reflectivity measurement setup at unprecedented high fluence levels. We investigate the catastrophic damage that occurs at very high fluences by demonstrating a dependence of the damage threshold on the ISA parameter F 2 and the maximum reflectivity fluence F 0 . We can clearly demonstrate that the damage fluence F d scales proportionally to √F 2 for all SESAMs. In the case of SESAMs with the same absorber where the product F sat .ΔR is constant, the damage fluence F d scales proportionally to F 0 . Therefore, damage occurs due to heating of the lattice by the energy absorbed due to the ISA process and is not related to the quantum well (QW) absorbers. Furthermore, we present guidelines on how to design samples with high saturation fluences, reduced induced absorption, and high damage thresholds. Using multiple QWs and a suitable di-electric topsection, we achieved SESAMs with saturation fluences >;200 μj/cm 2 , nonsaturable losses <;0.1%, and reduced ISA. Our best sample could not be damaged at a maximum available fluence of 0.21 J/cm 2 and a peak intensity of 370 GW/cm 2 . These SESAMs will be suitable for future high-power femtosecond oscillators in the kilowatt average output power regime, which is very interesting for attosecond science and industrial material processing applications.

15 February 2011 in Applied Physics B
Verified
Journal Article
Closed access
PDF file
RPR. Peters
R. Peters
CKC. Kränkel
C. Kränkel
SFS. T. Fredrich-Thornton
S. T. Fredrich-Thornton
KBK. Beil
K. Beil
KPK. Petermann
K. Petermann
UKU. Keller
U. Keller