Daisaku Nishina

Dr. Daisaku Nishina


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 October 2022 in Energies
Verified
Journal Article
Open access
PDF file
SKSupriya Khadka
Supriya Khadka
Hom Bahadur RijalHom Bahadur Rijal
Hom Bahadur Rijal
AKAMANO KATSUNORI
AMANO KATSUNORI
TSTeruyuki Saito
Teruyuki Saito
HIHikaru Imagawa
Hikaru Imagawa
MTMori Taro
Mori Taro
Comfort temperature is important to investigate because the chosen office indoor temperatures affect the energy used in a building, and a thermally comfortable environment makes the occupants be more productive. The effects of temperature on comfort are broadly recognized for thermal comfort. Japanese office buildings are well equipped with air-conditioning systems to improve the thermal comfort of the occupants. The main objectives of this research were to compare the winter comfort temperature in mixed mode (MM) and heating, ventilation and air-conditioning (HVAC) office buildings and to investigate the relationship between the comfort temperature and the indoor air temperature. This study measured the thermal environmental conditions of the office buildings and surveyed the thermal comfort of the occupants. The field survey was conducted during winter in seven office buildings located in the Aichi prefecture of Japan. In total, 4466 subjective votes were collected from 46 occupants. The result suggested that the occupants were found to be more satisfied with the thermal environment of MM buildings than that of HVAC office buildings. Overall, 95% of comfort temperatures were in the range 22~28 °C in MM and HVAC buildings, which were higher than the indoor temperature of 20 °C recommended by the Japanese government. The comfort temperature was highly correlated to the indoor air temperature of the MM buildings than to that of HVAC buildings. This indicated that the occupants were more adapted towards the given thermal environment of MM buildings.

18 August 2023 in Energies
Verified
Journal Article
Open access
PDF file
KGKahori Genjo
Kahori Genjo
HNHaruna Nakanishi
Haruna Nakanishi
MOMomoka Oki
Momoka Oki
HIHikaru Imagawa
Hikaru Imagawa
TUTomoko Uno
Tomoko Uno
Hom Bahadur RijalHom Bahadur Rijal
Hom Bahadur Rijal
A field survey of indoor environmental measurements and questionnaires on thermal sensation, overall comfort, and behaviors was conducted in four office buildings in Japan by visiting each office every month over a duration of more than a year during the coronavirus disease 2019 (COVID-19) pandemic. The indoor environment was measured concurrently. We obtained 1047 votes from office workers in their 20s to 60s. The regression and Griffiths’ methods were used to calculate the indoor comfort temperature. A logistic regression analysis was used to develop the occupant behavior model. Over 70% of the occupants found the indoor environment comfortable at a mean comfort temperature of 23.2 to 25.9 °C. Gender differences were observed in thermal sensation and overall comfort, but a gender difference was observed only in the cooling mode for the indoor comfort temperature. An adaptive model was developed for the office buildings in Nagasaki city to predict the indoor comfort temperature from the outdoor air temperature. The proportions of heating, cooling, and fan usage can be predicted from the outdoor air temperature using a logistic regression analysis. The adaptive model and occupant behavior model are useful for the indoor temperature control of the existing buildings and thermal simulation of the new building design.

12 July 2025 in Energies
Verified
Journal Article
Open access
PDF file
KTKoharu Tani
Koharu Tani
SKSayaka Kindaichi
Sayaka Kindaichi
KKKeita Kawasaki
Keita Kawasaki
DNDaisaku Nishina
Daisaku Nishina
Inverter-equipped heat pumps allow for increased energy efficiency. However, air conditioning (AC) systems often operate at low load ratios below where inverter control is effective, which reduces their energy efficiency. We developed an AC system that increases the apparent load ratio of the heat pump by using a phase-change material (PCM). Cooling and heating experiments were conducted with a PCM heat exchanger, which comprised aluminum plates and fins filled with paraffinic PCM. The result indicated a high heat transfer coefficient of >70 W/(m2·K). A simplified numerical model of the PCM heat exchanger as a lumped constant system was created based on the experiment. The calculations generally reproduced the experimental results, with root mean squared errors of 0.39 K for cooling and 0.84 K for heating, confirming their accuracy. Simulations were then conducted to evaluate the energy performance of the proposed system for the cooling season. While low load operation accounted for 39% of the total AC time for a non-PCM system, it was reduced to 2.7% for the proposed system. The proposed system demonstrated load ratios of 50–60% for most of the season, achieving an energy reduction of 11.4% owing to the improved efficiency at partial load ratios.

7 November 2024 in Energies
Verified
Journal Article
Open access
PDF file
TTToya TANAKA
Toya TANAKA
SKSayaka Kindaichi
Sayaka Kindaichi
KKKeita Kawasaki
Keita Kawasaki
DNDaisaku Nishina
Daisaku Nishina
Variable refrigerant flow (VRF) systems are common air-conditioning systems used in regions with moderate climates that have cooling and heating demands. Unlike typical air-source VRF systems, ground-source VRF systems require heat-source water circulation, and reducing the pumping power remains a significant problem. Herein, the intermittent pump control for circulating heat source water was achieved by installing a buffer water tank between the ground heat exchangers and VRF units. An intermittent control methodology was developed based on the indices of water transport efficiency and incorporated into a system simulation model with 72 boreholes, a cooling capacity of 252 kW, and a buffer water tank of 30 m3. Results indicated that intermittent control was achieved at heat load ratios lower than 40% as expected. This intermittent control allowed more efficient water transport with 38% lower pumping power than conventional inverter controls. Although the proposed system equipped more pumps and heat exchangers than conventional systems, it exhibited higher energy efficiencies for most measurement days than the conventional air-conditioning systems. The annual energy consumption was thus reduced by 34% and 8% compared to air-source VRF systems and conventional ground-source VRF systems, respectively.

26 June 2026 in Buildings
Verified
Journal Article
Open access
PDF file
NHNING HOU
NING HOU
DNDaisaku Nishina
Daisaku Nishina
SKSayaka Kindaichi
Sayaka Kindaichi
SSSo Sugita
So Sugita
SNShunki Nishii
Shunki Nishii
Background: Virtual reality (VR) has attracted increasing attention in architectural design education because of its potential to support spatial cognition and embodied understanding of architectural space. Compared with conventional two-dimensional (2D) drawings and screen-based three-dimensional (3D CAD) tools, VR enables learners to experience space at a realistic scale through binocular disparity and motion parallax, which may reduce cognitive load and facilitate experiential learning. However, previous studies have mainly relied on subjective evaluations, such as questionnaires and observations, and have not sufficiently examined differences in educational effectiveness among design tools or among students with different learning levels. Objective and Methods: This study aimed to identify effective teaching tools for facilitating students’ understanding at different learning levels and to propose appropriate methods for applying VR to improve educational effectiveness. To achieve this, we proposed an objective experimental method for evaluating the effectiveness of VR in architectural design education based on students’ ability to identify incorrect content in architectural design plans. The experiment compared the performance of students using 2D drawings, 3D CAD, and VR environments and examined differences according to student grade levels (higher- and lower-year students) objectively. Results: The results revealed that both higher- and lower-year students identified more incorrect content items related to “Fitting” (such as door layouts) when using 2D drawings (finding rates were 43.8%~53.3% higher than those with 3D CAD or VR), whereas more incorrect content items related to “Furniture” size were identified when using VR (finding rates were 18.8%~56.3% higher than those with 2D drawings or 3D CAD). In addition, items related to sectional and elevation design, such as “Opening,” as well as issues concerning the size of “Space,” were identified by higher-year students regardless of the tool used. In contrast, lower-year students identified approximately twice as many of these items when using VR as when using 2D drawings. Conclusions: Based on the above results, the effectiveness of VR varied depending on both the type of design knowledge and the students’ learning levels. VR improved lower-year students’ understanding of spatial dimensions, furniture and fitting compared with conventional tools. Furthermore, VR encouraged more detailed consideration of spatial and design-related issues during architectural design tasks. These findings suggest that VR can reduce the cognitive load associated with learning architectural spatial concepts and promote experiential learning close to real spatial perception. Implications: This study supports the appropriate use of VR in architectural design education. The experimental method proposed in this study can also be used to objectively evaluate the effectiveness of educational tools other than VR before their implementation in architectural design education. Applying this method in architectural education is expected to enhance students’ awareness of architectural spatial issues and promote more comprehensive spatial understanding during the design process.

19 October 2026
Verified
Book Chapter
Open access
PDF file
TMTowa Moriwake
Towa Moriwake
DNDaisaku Nishina
Daisaku Nishina
SKSayaka Kindaichi
Sayaka Kindaichi
SSSo Sugita
So Sugita
NHNing Hou
Ning Hou
SNShunki Nishii
Shunki Nishii
In recent years, VR tourism has been attracting attention in the tourism industry. However, it is not clear about the sightseeing behavior in VR space and the evaluation after VR sightseeing. Therefore, the authors created a VR space for the Kosanji Museum in Hiroshima Prefecture and conducted an experiment in which subjects were given a VR sightseeing experience. Consequently, we found that the VR sightseeing experience tended to give the same level of satisfaction as the on-site sightseeing experience and arouse intention to visit. This VR space was created to provide the same sightseeing experience as much as possible at the actual site. However, one issue remained was that the creation of the VR space was very labor-intensive. If the same results could be obtained by other VR space, it would be possible to reduce the amount of labor required. It could also lead to a VR space that would arouse more intention to visit. Therefore, in this study, we created two new VR spaces for the same sightseeing spot and conducted the same experiment. The results showed that the same level of satisfaction was obtained even when the amount of available experiences was reduced to some degree, and that the VR space with an extremely reduced amount of available experiences was more likely to arouse intention to visit the sightseeing spot. In this report, we present the method of creating new VR spaces and some of results, and summarize the characteristics of each VR space.