The piezoelectric properties of lead zirconate titanate [Pb(Zr,Ti)O 3 or PZT] ceramics could be enhanced by fabricating textured ceramics that would align the crystal grains along specific orientations. We present a seed-passivated texturing process to fabricate textured PZT ceramics by using newly developed Ba(Zr,Ti)O 3 microplatelet templates. This process not only ensures the template-induced grain growth in titanium-rich PZT layers but also facilitates desired composition through interlayer diffusion of zirconium and titanium. We successfully prepared textured PZT ceramics with outstanding properties, including Curie temperatures of 360°C, piezoelectric coefficients d33 of 760 picocoulombs per newton and g33 of 100 millivolt meters per newton, and electromechanical couplings k33 of 0.85. This study addresses the challenge of fabricating textured rhombohedral PZT ceramics by suppressing the otherwise severe chemical reaction between PZT powder and titanate templates.
5 December 2022 in Journal of Materials Science & Technology
High-temperature piezoelectric devices require piezoelectric ceramics with high Curie temperatures and high-temperature stability of piezoelectric properties to avoid the depolarization of piezoelectric ceramics during application. However, piezoelectric materials with high Curie temperatures usually have restrained piezoelectric properties. Crystallographic orientation via texture engineering is a practicable way to improve piezoelectric performance. Here, we propose a sintering-aid-assisted template grain growth strategy to texture BiScO3-PbTiO3 ceramics to overcome the low orientation issue that challenges the texturing of BS-PT for decades. By judiciously selecting B2O3-CuO as sintering aids, we fabricated highly ⟨001⟩-textured 0.43BS-0.57PT ceramics with Logtering factors >99.0% that possess high piezoelectric coefficients d33 of 474–612 pC/N while maintaining relatively high Curie temperatures of 370–402 °C. Importantly, this work addresses a long-standing issue presented in BS-PT ceramics, i.e., the low electromechanical coupling property of BS-PT ceramics (k33 < 0.70) by improving the electromechanical coupling factor k33 to 81.2%. The newly designed textured BS-PT ceramics are thought to be promising candidates for the design of high-temperature piezoelectric transducers and actuators.
Textured relaxor-PbTiO3 ceramics have received considerable attention from both academia and industry, due to their crystal-like properties, high composition homogeneity easy-to-process, and relatively low cost compared to their crystal counterparts. In this work, the -oriented Pb(In1/2Nb1/2)O3-Pb(Sc1/2Nb1/2)O3-PbTiO3 textured ceramics were fabricated by the template grain growth method. To explore the property variation in these textured ceramics under practical applications of piezoelectric devices, their electromechanical properties were characterized and analyzed under uniaxial stress, hydrostatic pressure, and d.c. bias electric field. The results show that the dielectric constants of all textured ceramics increase with an increase in the uniaxial prestress and hydrostatic pressure but decrease with an increase in the d.c. bias electric field. Among all textured ceramics, the textured ceramic with 3 vol. % BT templates exhibits the best stability under external fields. In particular, the electromechanical coupling factors of the textured ceramic change less than 2% with the hydrostatic pressure increase to 100 MPa. This work provides important data on textured relaxor ferroelectric ceramics, which will benefit the design and application of piezoelectric devices based on textured piezoelectric ceramics.
14 December 2023 in Journal of the European Ceramic Society
Intravascular ultrasound (IVUS) imaging is a minimally invasive medical technology that plays a critical role in diagnosis, treatment guidance, and post-treatment assessment of coronary artery diseases. As a crucial component of the IVUS system, conventional IVUS transducers are designed to be planar and unfocused to adequately cover the region of interest. However, this design comes at the cost of spatial resolution. Here, we developed a high-performance focused IVUS transducer using Pb(In1/2Nb1/2)O3-Pb(Sc1/2Nb1/2)O3-PbTiO3 (PIN-PSN-PT) textured ceramics with both high electromechanical performance (thickness-mode electromechanical coupling factor kt: ∼60%) and high Curie temperature (TC: ∼250 °C). Benefiting from the relatively low clamped dielectric constant (ε33S/ε0: ∼450) of PIN-PSN-PT-textured ceramics in contrast to currently used soft piezoelectric ceramics (>1000), we designed a relatively large aperture for the focused IVUS transducer, with a goal of enhancing lateral resolution across a larger depth of field, ranging from 1 to 5 mm. The developed focused IVUS transducer operates at 42 MHz with an −6 dB bandwidth of 72%, featuring a 0.6 × 0.6 mm2 aperture while maintaining an electrical impedance of approximately 40–60 Ω. The axial and lateral resolutions characterized by wire phantom imaging are 45 and 208 μm, respectively. The acoustic pressure generated by the focused IVUS transducer is 1.4 times higher than that of its planar counterpart. Ex vivo porcine coronary artery imaging demonstrates that our focused IVUS transducer offers improved image quality and uniformity for the visualization of intravascular structures. Our work shows great potential of PIN-PSN-PT-textured ceramics for creating high-frequency miniaturized focused transducers.