Surface coatings have proven highly effective in addressing the critical challenges of friction, wear, and corrosion on steel substrates, which are responsible for over 80% of mechanical failures in industrial applications. Recent research highlights that advanced coatings—such as ceramic carbides/nitrides, high-entropy alloys, and metal-matrix composites—significantly enhance hardness, wear resistance, and environmental durability through mechanisms including protective oxide film formation, solid lubrication, and microstructural refinement. Moreover, these coatings exhibit robust performance under combined tribological-corrosive (tribocorrosion) conditions, where synergistic interactions often accelerate material degradation. Key developments include multilayer and composite architectures that balance hardness with toughness, self-lubricating coatings capable of in situ lubricant release, and active or self-healing systems for sustained corrosion inhibition. Despite these advances, challenges remain in predicting coating lifetime under multifield service conditions and optimizing interfacial adhesion to prevent delamination. Future efforts should prioritize multifunctional coating designs, improved tribocorrosion models, and the integration of sustainable materials and AI-driven process optimization. This review consolidates these insights to support the development of next-generation coatings for extending the service life of steel components across demanding sectors such as marine, aerospace, and energy systems.

Magnetic and magnetocaloric properties of the amorphous Fe_92−xZr₈B_x ribbons were studied in this work. Fully amorphous Fe₈₉Zr₈B₃, Fe₈₈Zr₈B₄, and Fe₈₇Zr₈B₅ ribbons were fabricated. The Curie temperature (T_c), saturation magnetization (M_s), and the maximum entropy change with the variation of a magnetic field (−ΔS_m^peak) of the glassy ribbons were significantly improved by the boron addition. The mechanism for the enhanced T_c and −ΔS_m^peak by boron addition was studied.

As modern industrialization accelerates, traditional metallic materials face challenges in meeting critical surface protection requirements. Constrained by their physicochemical properties, these materials exhibit significant performance degradation. This leads to frequent peeling of surface coatings on critical components. Polyetheretherketone (PEEK) is a high-performance semi-crystalline thermoplastic used in advanced engineering applications. Its composite coating systems have emerged as a promising alternative to metallic coatings. This paper systematically reviews the recent advances in coating preparation techniques for PEEK composites. The current status of the use of mainstream preparation methods such as thermal spray technology, rapid prototyping and electrophoretic deposition is highlighted. The strengths and weaknesses of each method are also compared. Critical parameters including substrate roughness, temperature, and substrate elasticity are systematically examined. The effects of these variables are evaluated with respect to critical performance indicators, including porosity levels and interfacial bonding strength of PEEK composite coatings. A comparative investigation was carried out on different reinforcement materials. Their interfacial interactions with the matrix are examined in detail at the microscopic level. The impact of these modification strategies on coating performance was comprehensively evaluated.

Marine biofouling is a well-established and significant challenge for the maritime industry. Self-healing coatings applied to ships have demonstrated superior surface properties, including enhanced corrosion resistance and the ability to mitigate biological contamination. Consequently, numerous studies have been conducted to assess different self-repairing coatings, which incorporate mechanisms such as microcapsules, dynamic covalent bonds, and ion exchange. This review begins with an introduction to the process of biofouling formation. It then provides a comprehensive outline of the self-healing coatings that have been developed to improve wear resistance, summarizing the advancements in this area. Finally, building upon these three coating systems, this paper offers a summary of the fabrication and protection technologies for self-healing coatings, including the preparation of micro/nano containers, corrosion warning mechanisms, and intelligent responsive protection. Furthermore, the review explores the future prospects of self-healing coatings, offering valuable insights for researchers in the field. The potential limitations of their application scenarios are also addressed.

The Curie temperature (T_c) and magnetic entropy change (−ΔS_m), and their relationship to the alloy composition of Tb–Co metallic glasses, were studied systematically in this paper. It was found that, in contrast to the situation in amorphous Gd–Co ribbons, the dependence of Tc on Tb content and the maximum −ΔS_m vs. T_c -2/3 plots in Tb–Co binary amorphous alloys do not follow a linear relationship, both of which are supposed to be closely related to the non-linear compositional dependence of Tb–Co interaction due to the existence of orbital momentum in Tb.

Chemical vapor deposition (CVD) is a crucial technique for fabricating high-performance amorphous silicon coatings, leveraging its process flexibility and microstructural controllability. Optimizing processes like hot-wire chemical vapor deposition, plasma-enhanced chemical vapor deposition, and catalytic chemical vapor deposition enable precise regulation of coating density, surface roughness, and chemical bonding. These amorphous silicon coatings exhibit outstanding tribological properties and exceptional corrosion resistance, primarily attributed to their unique amorphous structure eliminating grain boundary defects and forming dense passivation films. Future research should focus on intelligent process development, multi-field coupling failure analysis, environmental friendliness enhancement, and lifespan prediction models to advance this technology.