Vanadium redox flow batteries (VFBs) are one of the most promising technologies for long-duration energy storage due to their ability to decouple power and energy capacity [1] . Another major feature is their long operational lifespan. In fact they can endure several thousands of charge-discharge cycles without significant degradation, making them well-suited for grid-scale applications [2]. However, to fully capitalize on these advantages, proper operation and maintenance are essential. One of the key challenges in ensuring long-term performance is managing parasitic phenomena such as air oxidation of V²⁺ and hydrogen evolution, which cause deviations of the average oxidation state from the ideal value of 3.5 . If left unmonitored, these imbalances can lead to efficiency losses, capacity fade, and ultimately, reduced battery lifespan. Therefore, continuous monitoring of electrolyte balance is crucial to prevent undesired operating conditions and to maximize both battery performance and longevity [3-6]. A common approach for State of Charge (SoC) monitoring in VFBs involves measuring the cell open circuit voltage (OCV). While this method can be sufficiently accurate for a perfectly balanced electrolyte, it fails to detect imbalance occurrence, missing to prevent the issues above. A more accurate approach consists in using a three-electrode test cell to measure the open-circuit voltage (i.e. the electrochemical potential) of both positive and negative cell electrodes against the third reference electrode. However, conventional reference electrodes, such as Ag/AgCl, suffer from issues such as contamination and potential drift, which require periodic regeneration and increase system complexity and cost. An alternative less explored approach consists in using a three-electrode test cell in which the reference electrode is made of porous carbon containing a vanadium electrolyte solution in a 3.5 oxidation state (3.5 OS). A cell with this configuration has been extensively tested in the VRFB-CTF single-cell test bench at EESCoLab [7,8], University of Padua , to evaluate the feasibility and limitations of the method. Following successful validation, the 3.5 OS three-electrode test cell has been integrated into the 10 kW / 26 kWh IS-VFB upgrade experimental facility at EESCoLab to assess its performance in an industrial-scale battery. This presentation will report the first experimental results, highlighting both the effectiveness and limitations of the approach in detecting electrolyte imbalances in large-scale VFBs. References Trovò, et al., Prospects for industrial scale vanadium redox flow batteries, Int. , 49 (14), (2023) 24487-24498. Poli, et al., Techno-economic assessment of industrial Vanadium Flow Batteries based on experimental data, Appl Energy , 362 (2024) 122954. Poli, et al., Novel electrolyte rebalancing method for vanadium redox flow batteries, Chem. Eng. J. , 405 (2021), # 126583 Poli, et al., Rebalancing/Regeneration of Vanadium Flow Batteries, in C. Roth, et al. (Eds.), Redox Flow Batteries , Vol. 2, Wiley, Weinheim, Germany Dec 2022 Poli, et al., Electrochemical rebalancing process for vanadium flow batteries: sizing procedure and economical assessment”, J. Energy Storage , 58 (2023), 106404. Trovò, et al., New strategies for the evaluation of VFB: testing prototypes, Opin. Chem. Eng , 37 (2022) 100853. Trovò, et al., A Flow Battery Cell Testing Facility for versatile active material characterization: features and operations, Power Sources , 625 (2025) 235679. Trovò, et al., Electrical Characterization of Vanadium Flow Battery-Cell Test Facility (VFB-CTF): Early Results and Methods for Scaling Up, Notes Electr. Eng ., 1275 LNEE, (2025) 333–346.