This research aims to advance the understanding and application of dynamic models for gears within agricultural machinery drive trains by developing analytical solutions. Despite the significant advancements in vibration analysis, there is a notable scarcity of comprehensive research that addresses the analytical modeling of gear dynamics, particularly using advanced mathematical techniques such as the multiple scale method (MSM). A new approach to modeling gear meshing is introduced, where the Fourier expansion of a rectangular signal is utilised to simulate the time-varying mesh stiffness (TVMS). Such an approach allows the use of the MSM as an efficient tool to obtain solutions for parametrically induced vibrations. A dynamic model of a simple helical gear system is introduced in the form of Hill’s equation, and a sensitivity analysis is conducted for the main parameters of the system based on the solution obtained with the MSM. The results show the high credibility of the provided method when compared with a well-known state-of-the-art model and that the model reacts to parameter variations as expected. Additionally, an analysis of the energy harvesting possibilities is presented, which shows that, for the default parameter values, the harvester should be tuned to 5694.31 Hz to generate the maximum energy. It is concluded that the proposed model and MSM approach can serve as suitable tools for gear analysis, and the future paths for research are defined.
DynPy is an open-source library implemented in Python (version 3.10.12) programming language which aims to provide a versatile set of functionalities for mechanical and electrical engineers. It enables the user to model, solve, simulate, and report analysis of dynamic systems with the use of a single environment. The DynPy library comes with a predefined collection of ready-to-use mechanical and electrical systems. A proprietary approach to creating new systems by combining independent elements defined as classes, such as masses, springs, dampers, resistors, capacitors, inductors, and more, allows for the quick creation of new, or the modification of existing systems. In the paper examples for obtaining analytical and numerical solutions of the systems described with ordinary differential equations were presented. The assessment of solver accuracy was conducted utilising a coupled electro-mechanical model of a direct current motor, with MATLAB/Simulink (R2022b) used as a reference tool. The model was solved in DynPy with the hybrid analytical–numerical method and fully analytically, while in MATLAB/Simulink strictly numerical simulations were run. The comparison of the results obtained from both tools not only proved the credibility of the developed library but also showed its superiority in specific conditions.
The article focuses on the proposal of a model of a skyscraper equipped with a semi-active pendular vibration eliminator utilizing the phenomenon of fluid transfer, which could be used in monitoring the condition of slender structures. The proposed model consists of two main elements: an upper...
This research aims to advance the understanding and application of dynamic models for gears within agricultural machinery drive trains by developing analytical solutions. Despite significant advancements in vibration analysis, there is a notable scarcity of comprehensive research that addresses the analytical modeling of gear dynamics, particularly using advanced mathematical techniques such as the Multiple Scale Method (MSM). This research aims to bridge this gap by starting with the simplest gear mathematical models and progressively scaling to more complex systems. Such models facilitate gearbox design optimisation, fault diagnosis, and maintenance planning, effectively reducing downtime and increasing the reliability of agricultural machinery. The study is oriented toward employing the MSM to derive analytical solutions to determine the vibration frequency ranges and identify emitted components. This mathematical approach offers a generalized framework for understanding vibration propagation and can significantly enhance the precision of vibration management strategies. Based on these insights, the research can contribute to the sustainable design of agricultural machinery drive trains, emphasizing vibration reduction and efficient propagation control. Ultimately, this work seeks to enhance these machinery’s durability and operator comfort, fostering safer and more effective agricultural practices.