To date, only one polymer can self-grow to an extended length beyond its original size at room temperature without external stimuli or energy input. This breakthrough paves the way for significant advancements in untethered autonomous soft robotics, eliminating the need for the energy input or external stimuli required by all existing soft robotics systems. However, only freshly prepared samples in an initial state can self-grow, while non-fresh ones cannot. The necessity of synthesizing from monomers for each use imposes significant limitations on practical applications. Here, we propose a strategy to rejuvenate non-fresh samples to their initial state for on-demand self-growth through the synergistic effects of solvents and dynamic covalent bonds during swelling. The solvent used for swelling physically transforms the non-fresh LCEs from the liquid crystal phase to the isotropic phase. Simultaneously, the introduction of the transesterification catalyst through swelling facilitates topological rearrangements through exchange reactions of dynamic covalent bonds. The rejuvenation process can also erase growth history, be repeated several times, and be regulated by selective swelling. This strategy provides a post-modulation method for the rejuvenation and reuse of self-growing LCEs, promising to offer high-performance materials for cutting-edge soft growing robotics.
As one of the most widely used thermosets due to its excellent performances, epoxy resin (EP) is widely used in various fields and often employed as a component of composite actuator devices, strengthening their mechanical properties. However, the expanding production of EP inevitably leads to the accumulation of waste end-of-life equipment and the corresponding increasingly serious environmental problems. This review summarizes the recycling strategies of EP, divided into two perspectives: recycling from wastes and sources. Chemical recycling is expected to be the future of waste EP treatment, and we discuss the chemical recycling methods of existing waste EP based on different mechanisms, including the selective cleavage of ester bonds, C–N bonds, and C–O bonds. On the other hand, epoxy vitrimer networks based on various dynamic covalent linkages are also outlined, which can respond to multiple external stimuli and provide materials with recyclability from the origin. Therefore, the use of epoxy vitrimer actuators can prevent waste generation throughout the whole lifecycle. We present some issues of concern in both waste-based and source-based recycling strategies and emphasize the significance of scaling-up. Finally, we summarized the current situation and present some future perspectives with the aim of making practical contributions to environmental issues.
Dynamic chemistry endows liquid crystal elastomers (LCEs) with reprogrammability, enabling the reversible modulation of actuation modes to adapt to diverse tasks and enhancing sustainability and lifecycle management. However, balancing toughness, softness, and work capacity remains challenging due to their inherent tradeoff, as these properties are essential for achieving high-performance and stable actuation. Here, inspired by mussel coordination chemistry, we design a macromolecular crosslinker that combines covalent crosslinking with coordination bonds to tackle this challenge. The optimized LCE achieves exceptional toughness of 28.5 MJ/m³ and low Young’s modulus of 3.1 MPa, with high-temperature toughness exceeding 9.3 MJ/m³ at 90 °C (25 °C above phase transition temperature, Ti) and reaching 5.5 MJ/m³ at 120 °C (55 °C above Ti), while maintaining work capacity of 416 kJ/m³. Increasing coordination bond content further improves toughness (up to 67.0 MJ/m³) without significantly altering modulus or work capacity. Additionally, incorporating different metal ions provides a strategy akin to stem cell differentiation, transforming a single base material into variants with distinct properties. This enables spatially heterogeneous materials, paving the way for highly integrated actuators with multifunctionality.
Introducing dynamic ester bonds into epoxy–anhydride resins enhances the reprocessability of the crosslinked network, facilitated by various types of transesterification catalysts. However, existing catalysts, such as metal salts and organic molecules, often struggle with dispersion, volatility, or structural instability issues. Here, we propose to solve such problems by incorporating a liquid-state, thermally stable transesterification catalyst into epoxy resins. This catalyst, an imidazole derivative, can be uniformly dispersed in the epoxy resin at room temperature. In addition, it shows high-temperature structural stability above at least 200 °C as the synergistic effects of the electron-withdrawing group and steric bulk can be leveraged. It can also effectively promote transesterification at elevated temperatures, allowing for the effective release of shear stress. This property enables the thermal recycling and reshaping of the fully crosslinked epoxy–anhydride resin. This strategy not only enhances the functionality of epoxy resins but also broadens their applicability across various thermal and mechanical environments.
Liquid crystal elastomers (LCEs) are blooming in soft robotics and intelligent devices due to their reversible and anisotropic deformation. To imitate sophisticated biological systems, photopatterning plays a crucial role in introducing programmable spatial heterogeneity into LCEs, due to its high resolution and non-contact operational simplicity. However, current photo-regulation methods either modify pre-formed homogeneous networks, offering limited tunability, or inevitably rely on thermal curing and specially designed monomers/reactions, which compromises spatial resolution, flexibility, and generality. Here, we introduce a dual-wavelength photopatterning strategy that enables spatially programmable heterogeneity directly during synthesis, using two wavelength of lights and the most widely accessible thiol-acrylate formulation in LCEs. By selectively triggering radical-mediated (365 nm) or base-catalyzed polymerization (450 nm), we create hard and soft networks with distinct properties. By flexibly regulating the triggering sequence and duration, we achieved seamless integration of continuous gradients within a single LCE: achieving the continuous tuning of modulus (1.3-14.8 MPa), actuation strain (54-93%) and, the broadest tuning range of nematic-isotropic transition temperature (Ti, 55-110 °C). It is indicated that even conventional LCE formulations can achieve multilevel encryption, mechanical differentiation, and bio‑inspired sequential actuation. This strategy establishes a versatile platform for designing functionally heterogeneous LCE devices for next-generation soft materials.
Minimal pre-strain (∼10%) programming in dynamic LCEs enables large, tunable actuation strain through the cooperative orientation of mesogens and network rearrangement via bond exchange.