Tellurium nanowires (Te NWs) have been widely investigated in energy generators, photoelectric devices, sensors and chemical templates due to their interesting properties. However, these promising applications can be critically hindered by the inferior electrical conductivity of Te NWs and the ungreen and high energy consumption of the synthesis process. Herein, we suggest a feasible and eco-friendly strategy to synthesize Te NWs via a hydrothermal process by employing the biomolecule glucose as the reductant. The suggested strategy not only successfully avoided the use of toxic and harsh reductants and additional surfactants but also obtained Te NWs, even at low reaction temperatures. Moreover, the synthesized Te NWs presented a high electrical conductivity of 8.44 S cm−1 by optimizing the reaction conditions, and a large power factor of 97.3 μW m−1 K−2 can be obtained after annealing. Combining the variable range hopping (VRH) model with the carrier transport parameters, the PVP surfactant-weakened carrier transporting mechanism was proposed. With the as-assembled thermoelectric generator, a promising output voltage of 231 mV can be realized when the temperature difference is 80 K. The strategy shows a novel design for synthesizing highly conductive Te NWs in an eco-friendly process and presents a promising Te NWs-based thermoelectric material.
It is crucial to prepare high-mobility organic polycrystalline film through solution processing. However, the delocalized carrier transport of polycrystalline films in organic semiconductors has rarely been investigated through Hall-effect measurement. This study presents a strategy for building strong intermolecular interactions to fabricate solution-crystallized p-type perylene diimide (PDI) dianion films with a closer intermolecular π–π stacking distance of 3.25 Å. The highly delocalized carriers enable a competitive Hall mobility of 3 cm2 V−1 s−1, comparable to that of the reported high-mobility organic single crystals. The PDI dianion films exhibit a high electrical conductivity of 17 S cm−1 and typical band-like transport, as evidenced by the negative temperature linear coefficient of mobility proportional to T−3/2. This work demonstrates that, as the intermolecular π–π interactions become strong enough, they will display high mobility and conductivity, providing a new approach to developing high-mobility organic semiconductor materials.
8 March 2023 in Chemical Research in Chinese Universities
The past decade has witnessed an emerging and fast-growing field on mechanically soft systems, ranging from soft materials (e.g. hydrogels) to soft devices (e.g. flexible electronics), and to soft functional systems (e.g. soft robotics). It is envisioned that soft systems will continue to thrive in the coming decades in academia and industrial communities. The launch of Soft Science is to provide the first dedicated platform for publishing research findings and to share the knowledge among the communities.
Thermoelectric (TE) energy harvesting can effectively convert waste heat into electricity, which is a crucial technology to solve energy concerns. As a promising candidate for energy conversion, poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT:PSS) has gained significant attention owing to its easy doping, high transparency, and solution processability. However, the TE performance of PEDOT:PSS still needs to be further enhanced. Herein, different approaches have been applied for tuning the TE properties: (i) direct dipping PEDOT:PSS thin films in ionic liquid; (ii) post-treatment of the films with concentrated sulfuric acid (H2SO4), and then dipping in ionic liquid. Besides, the same bis(trifluoromethanesulfonyl)amide (TFSI) anion and different cation salts, including 1-ethyl-3-methylimidazolium (EMIM+) and lithium (Li+), are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS. The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously, and the resulting maximum power factor is 46.7 μW⋅m−1⋅K–2, which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT. The work provides a reference for the development of organic films with high TE properties.