The kick skill and its analysis are important in Soccer. To detect impact point by using virtual impact model is aim of this study. The virtual impact model was made as a surface composed of virtual markers. As the result, mean coordinate values of impact point were below; straight (Lateral: −24.0 ± 5.6 mm, Horizontal: 152.7 ± 8.4 mm, Vertical: 52.3 ± 4.0 mm), curve (Lateral: −35.6 ± 4.8 mm, Horizontal: 151.6 ± 13.7 mm, Vertical: 47.5 ± 5.2 mm), knuckle (Lateral: −33.3 ± 9.0 mm, Horizontal: 140.8 ± 10.7 mm, Vertical: 52.1 ± 2.7 mm). According to comparison of coordinate value of each trial, mean point of straight was near the center line of foot on instep, mean point of curve was located on inside of foot, mean point of knuckle was near the foot joint. We revealed difference of impact point and showed trajectory of impact point.
The rotation of a soccer ball is affected by several factors, such as impact point and foot posture, which are generated by joint torque in the lower limb. This study aimed to investigate joint torque in the lower limb that generates foot posture and swing trajectory, and compare three types of kicks before and after a practice period for participants to learn to control the ball rotation. An optical three-dimensional motion capture system was used to record the kicking motion of the participants. The results indicate that the adduction torque of the hip joint at the moment of impact decreased for curve kicks (from 0.56 to 0.25 Nm/kg) and increased for knuckle kicks (from −0.09 to 0.37 Nm/kg). We considered that the curve and knuckle kicks swing towards the inside (because of their positive values in the post experiment) with hip joint adduction before impact to control ball rotation.