The geochemical characteristics of geothermically heated water can reveal deep geothermal processes, leading to a better understanding of geothermal system genesis and providing guidance for improved development and utilization of such resources. Hydrochemical and hydrogen oxygen isotope analysis of two geothermal field (district) hot springs based on regional geothermal conditions revealed that the thermal water in the Litang region is primarily of the HCO₃Na type. The positive correlations found between F⁻, Li²⁺, As⁺, and Cl⁻ indicated a common origin, and the relatively high Na⁺ and metaboric acid concentrations suggested a relatively long groundwater recharge time and a slow flow rate. The values of δD and δ¹⁸O were well distributed along the local meteoric line, indicating a groundwater recharge essentially driven by precipitation. The thermal reservoir temperature (152°C–195°C) and thermal cycle depth (3156–4070 m) were calculated, and the cold water mixing ratio (60%–68%) was obtained using the silica-enthalpy model. Finally, hydrogeochemical pathway simulation was used to analyze the evolution of geothermal water in the region. The results were further supported by the high metasilicate content in the region. Of the geothermal fields in the region, it was found that the Kahui is primarily affected by albite, calcite precipitation, and silicate, while the Gezha field is primarily affected by calcite dissolution, dolomite precipitation, and silicate.

The Jizhong Depression is a typical Mesozoic and Cenozoic fault basin located in the northwestern part of the Bohai Bay Basin that has abundant hydrothermal and geothermal resources and enormous development potential. In this study, hydrochemical and isotopic analyses were conducted on water samples from the southern region of the Jizhong Depression. The formation and evolution processes of the deep geothermal water were analyzed, the circulation process of the deep geothermal water was determined, and the genetic mechanism of the geothermal systems was elucidated. The hydrochemical types of the geothermal fluids in the sandstone reservoirs in the research area are mainly Cl·HCO₃⁻Na type, while the geothermal fluids in the carbonate reservoirs are mainly Cl-Na type and Cl·HCO₃⁻Na type. The ion components in the geothermal water are mainly controlled by the dissolution of the carbonate rocks and the alternate adsorption of cations. The elevation of the geothermal water supply area is 763–1063 m, and the main source is precipitation from the mountainous areas in the western Taihang Mountains. The Na-K-Ca temperature scale and multi-mineral equilibrium method have relatively small errors and are suitable for the southern region of the Jizhong Depression, with average errors of 21.44 °C and 32.64 °C, respectively. The depth of the Jxw thermal storage cycle in the research area is 3033–5187 m, and the depth of the Ng thermal storage cycle is 1360–2862 m. The content of the main ions (Na⁺, K⁺, and Cl⁻) in the water samples of the study area is greater in the Jxw thermal storage than in the Ng thermal storage; the Jxw thermal storage water samples have lower γNa⁺/γCl⁻ values than the Ng thermal storage; and the γSO₄²⁻/γCl⁻ and γCl⁻/(γHCO₃⁻ + CO₃²⁻) values are greater than those of the Ng thermal storage, indicating that the Jxw thermal storage is located in a geological environment with better sealing, longer flow, slower water circulation, more complete leaching, and higher salinity than the Ng thermal storage. Part of the deep thermal storage is transmitted upwards through the rocks via thermal conduction, and part is transmitted upwards along fault channels via thermal convection, forming a convection–conduction-type geothermal system.

Geothermal fluids are the main carrier of hydrothermal geothermal resources. Identifying the differences in geothermal fluids in different types of reservoirs is a prerequisite and fundamental for the efficient development of geothermal resources and is of great significance for scientific research on geothermal resources. The North China Plain contains a typical carbonate thermal reservoir, and in this paper, the hydrochemical, isotopic, and redox characteristics of the geothermal fluids in sandstone and carbonate reservoirs are studied to obtain the differences in the geothermal fluids in the Rongcheng geothermal field in Xiong’an New Area. The results indicate that the geothermal fluids in the sandstone and carbonate reservoirs are mainly supplied by atmospheric rainfall, and the hydrochemical type is mainly Cl-Na type. By comparing and analyzing the stable isotope (O, H, C, S, and Sr) characteristics of the two types of geothermal fluids, it is found that the variation range of δ13C values for two types of sandstone thermal storage geothermal fluids was found to be −10.6‰~−12.8‰, while the variation range of δ¹³C values for carbonate thermal storage geothermal fluids was −3.3‰~−7.5‰. The ⁸⁷Sr/⁸⁶Sr ratio of sandstone thermal storage geothermal fluids was distributed between 0.708–0.718, and the ⁸⁷Sr/⁸⁶Sr ratio of carbonate thermal storage geothermal fluids was distributed between 0.708–0.713. The range of δ³⁴S values for sandstone thermal storage geothermal fluids was +9.46‰~+10.5‰, and the range of δ³⁴S values for carbonate thermal storage geothermal fluids was +24.84‰~+34.49‰. The two types of geothermal fluids have been subjected to varying degrees of oxidation-reduction, and their cycling and mixing characteristics are different. This has resulted in the formation of relatively oxidized geothermal fluids in the sandstone geothermal reservoir and relatively reduced geothermal fluids in the carbonate geothermal reservoir. In future development and utilization of geothermal resources, paying attention to the basic characteristics of the geothermal fluids in different reservoirs and identifying the differences in different geothermal fluids can further improve the efficiency of geothermal resource development and utilization.

Hydrogeochemical research on fluids is an effective method to understand the formation mechanism, occurrence environment, and circulation process of groundwater. The groundwater sampling sites are located in the town of Dachaidan on the northeastern edge of the Tibetan Plateau, which was selected as the study object. Samples were collected from hot and cold springs and surface water in the area. This study is based on the analysis of water chemistry and isotopes, and aims (1) to discuss the chemical characteristics of groundwater in Da Qaidam, (2) to estimate the deep reservoir temperatures, recharge elevation and circulation depth of geothermal waters, and (3) to figure out the heat source beneath the geothermal area and its genetic mechanism. The result showed the following: The hydrochemical type of the hot spring is Cl·SO₄-Na and Cl-Na, and the hydrochemical type of cold spring is SO₄·HCO₃-Na·Ca and Cl·HCO₃·SO₄-Ca·Na. The main source of groundwater recharge is snow and ice melt water. The recharge elevation ranges from 4666.8 m to 5755.9 m. The geothermal reservoir temperature is about 119.15–126.6 °C. Ice and snow melt water infiltrate into the high mountainous areas on the north side of Da Qaidam and circulate underground through the developed deep and large fractures. Part of the groundwater migrates upwards under the water conduction of the Da Qaidam fault fracture zone to form cold springs, while another part is heated by deep circulation and exposed to the surface in the form of medium to low temperature tectonic hot springs. The research results can provide a scientific basis for geothermal resource exploitation and utilization in Qinghai Province.