The coastal areas of three nuclear power plants (NPP) in the Tohoku region of Japan were impacted by the tsunami waves of the earthquake on 11 March 2011. The overtopping of the tsunami protective dikes of Fukushima Daiichi NPP and inundation of the NPP site was followed by the nuclear accident with a large scale environmental contamination. The site of the “sister” NPP Fukushima Daini at 10 km southward from Fukushima Daichi was also inundated by waters of similar depths; however, quick reconstruction the emergency energy supply of the reactors has prevented a nuclear accident on this site. Onagawa NPP located 115 km North-East of Fukushima Daiichi is the closest NPP to the epicenter of the earthquake – the source of tsunami waves. The tsunami protection dike of this NPP was not overtopped.To simulate the consequences of the radioactive contamination of the coastal waters at Fukushima Daiichi NPP we use the modelling system that includes the module of the numerical solution of the nonlinear shallow water equation (SWE). This module can also be used for the modelling of tsunami propagation and inundation of the coastal areas. For the testing of the SWE module, we provided the modeling of the tsunami propagation and coastal inundation in at the coast of Miyagi and Fukushima prefectures from Onagawa to Iwaki 11 March 2011. The presented part of the work includes the results of the model verification and analyses of the dynamics of the inundation of the sites of three NPPs.The development of the 2D model COASTOX has started after the Chernobyl accident for simulations radionuclide transport in the rivers at ChNPP (Zheleznyak et al, 1989-2000). The hydrodynamic module is based on the shallow water equations. The 2-D depth-averaged advection-diffusion equations with sink source terms are used to describe the transport of suspended sediments and radionuclide in solute and with suspended sediments. The contemporary version of COASTOX code is based on the solution of 2-D shallow water equations on unstructured triangular grids using the Finite Volume Method with the verified possibilities for the modelling of wetting-drying flows. We implement a Godunov-type flux calculation scheme with approximate HLLC or Roe methods of solving a Riemann problem. The shock waves are resolved by using TVD flux limiting. COASTOX code includes two finite-difference algorithms for the numerical solution of sediment and radionuclide transport equations: explicit and implicit. For the solution of erosion-deposition equation and bottom contamination equation source, terms in transport equations are treated implicitly. The numerical code is parallelized for the CPU multi-processors systems and GPU. The SWE module was tested for the river floodplain inundation for the number of the cases and for the simulation of the radionuclide wash off from the floodplain of the Pripyat river at Chernobyl NPP. The model was implemented for the Tohoku coast on a grid of 2 million cells. The modelling results were compared with the published tsunami gage data. The dynamics of the inundation of three NPPs sites were analyzed.
An important aspect of an Earth Systems Science Prediction Systems (ESSPS) is to describe and predict the behavior of contaminants in different environmental compartments following severe accidents at chemical and nuclear installations. Such an ESSPS could be designed as a platform allowing to integrate models describing atmospheric, hydrological, oceanographic processes, physical-chemical transformation of the pollutants in the environment, contamination of food chain, and finally the overall exposure of the population with harmful substances. Such a chain of connected simulation models needed to describe the consequences of severe accidents in the different phases of an emergency should use different input data ranging from real-time online meteorological to long-term numerical weather prediction or ocean data.One example of an ESSPS is the Decision Support Systems JRODOS for off-site emergency management after nuclear emergencies. It integrates many different simulation models, real-time monitoring, regional GIS information, source term databases, and geospatial data for population and environmental characteristics.The development of the system started in 1992 supported by European Commission’s RTD Framework programs. Attracting more and more end users, the technical basis of of the system had to be considerably improved. For this, Java has been selected as a high level software language suitable for development of distributed cross-platform enterprise quality applications. From the other hand, a great deal of scientific computational software is available only as C/C++/FORTRAN packages. Moreover, it is a common scenario when some outputs of model A should act as inputs of model B, but the two models do not share common exchange containers and/or are written in different programming languages. <!-- I do not understand that sentence. Maybe better remove -->To combine the flexibility of Java language and the speed and availability of scientific codes, and to be able to connect different computational codes into one chain of models, the notion of distributed wrapper objects (DWO) has been introduced. DWO provides logical, visual and technical means for the integration of computational models into the core of the system system, even if models and the system use different programming languages. The DWO technology allows various levels of interactivity including pull- and push driven chains, user interaction support, and sub-models calls. All the DWO data exchange is realized in memory and does not include IO disk operations, thus eliminating redundant reader/writer code and minimizing slow disk access. These features introduce more stability and performance of an ESSPS that is used for decision support.The current status of the DWO realization in JRODOS is presented focusing on the added value compared to traditional integration of different simulation models into one system.