The coupling effect of moisture content and temperature on the elastic modulus of concrete is experimentally investigated. The elastic modulus of dry concrete exhibits a clear temperature-weakening effect, while the elastic modulus of wet concrete exhibits a water-strengthening effect at room temperature. Under humidity-heat conditions, the elastic modulus of wet concrete declines with the temperature rise. When the temperature is 20 °C, 200 °C, 400 °C, 520 °C, and 620 °C, the humidity–heat coupling factors of the elastic modulus change rate with moisture content are 0.08, 0.07, 0.04, 0.01, and −0.03, respectively, and the declining rate increases with the rise of moisture content. The relation between the humidity-heat coupling factor DIF, moisture content, and temperature was established; The equivalent relation between the water-strengthening effect and the temperature-weakening effect of the elastic modulus was obtained. The temperature range of the strengthening effect and “apparent weakening effect” of water stored inside concrete before heating on elastic modulus was determined; The evolutionary mechanism of the competition between the microcrack expansion and healing of concrete under combined humidity and heat conditions was revealed.
The associated effects of temperature and steel fiber content on the energy absorption properties of concrete were examined using quasi-static uniaxial compression tests of concrete materials with varied steel fiber contents (0%, 0.5%, 1%, and 1.5%) at various temperatures (20 °C, 200 °C, 400 °C, and 520 °C). The experimental findings demonstrate that steel fibers can greatly boost concrete’s ability to absorb energy and that the toughness index rises with steel fiber concentration. The energy absorption capacity of concrete under high-temperature conditions also significantly decreases as temperature rises, and the energy absorption ability of steel fiber concrete under the same temperature is superior to that of plain concrete. The coupled influence factor K of temperature–steel fiber percentage characterizing the energy-absorbing ability of concrete was determined, and the coupled influence law of temperature and steel fiber content on the energy-absorbing capacity of concrete materials was summarized and analyzed on the basis of the experimental data of high-temperature compression. Equivalent equations for steel fiber reinforcing and temperature weakening effects when they are comparable (K = 1) are developed and equivalent parameters for concrete materials are given.
Strength testing of concrete mainly relies on physical experiments, which are not only time-consuming but also costly. To solve this problem, machine learning has proven to be a promising technological tool in concrete strength prediction. In order to improve the accuracy of the model in predicting the compressive strength of concrete, this paper chooses to optimize the base learner of the ensemble learning model. The position update formula in the search phase of the sparrow search algorithm (SSA) is improved, and piecewise chaotic mapping and adaptive t-distribution variation are added, which enhances the diversity of the population and improves the algorithm’s global search and convergence abilities. Subsequently, the effectiveness of the improvement strategy was demonstrated by comparing improved sparrow search algorithm (ISSA) with some commonly used intelligent optimization algorithms on 10 test functions. A back propagation neural network (BPNN) optimized with ISSA was used as the base learner, and the adaptive boosting (AdaBoost) algorithm was used to train and integrate multiple base learners, thus establishing an adaptive boosting algorithm based on back propagation neural network improved by the improved sparrow search algorithm (ISSA-BPNN-AdaBoost) concrete compressive strength prediction model. Then comparison experiments were conducted with other ensemble models and single models on two strength prediction datasets. The experimental results show that the ISSA-BPNN-AdaBoost model exhibits excellent results on both datasets and can accurately perform the prediction of concrete compressive strength, demonstrating the superiority of ensemble learning in predicting concrete compressive strength.
This paper presents a novel adaptive crack-tip extended isogeometric analysis (adaptive CT XIGA) framework based on locally refined B-splines (LR B-splines) for efficient and accurate fracture modeling in two-dimensional solids. The XIGA method facilitates crack modeling without requiring the specific locations of crack faces and enables crack propagation simulation without remeshing by employing localized enrichment functions. LR B-splines, as an advanced extension of B-splines and NURBS, offer high-order continuity, precise geometric representation, and local refinement capabilities, thereby enhancing computational accuracy and efficiency. Various local mesh refinement strategies, designed based on crack and crack-tip locations, are investigated. Among these strategies, the crack-tip topological refinement strategy is adopted for local refinement in the adaptive CT XIGA framework. Stress intensity factors (SIFs) are evaluated using the contour interaction integral technique, while the maximum circumferential stress criterion is adopted to predict the crack growth direction. Numerical examples demonstrate the accuracy, efficiency, and robustness of adaptive CT XIGA. The results confirm that the proposed framework achieves superior error convergence rates and significantly reduces computational costs compared to a-posteriori-error-based adaptive XIGA methods, particularly in crack propagation simulations. These advantages establish adaptive CT XIGA as a powerful and efficient tool for addressing complex fracture problems in solid mechanics.