High-power bicycle disc braking can create excessive temperatures and boiling brake fluid, resulting in performance degradation and damage. The goal of this work is to understand brake friction performance and thermal behavior for bicycle disc brakes. A previously described disc braking dynamometer is used to assess brake pad performance of sintered metallic brake pads, organic brake pads, and ‘power’ organic pads in up to 400 W of braking power. The friction coefficient is found to be dependent on both temperature and normal force. Friction curve fits are provided for temperatures between 300 K and 550 K. Organic and ‘power’ organic pads are found to have similar behavior, and have higher friction coefficients compared to metallic pads. Further, brakes on an instrumented bicycle are tested in outdoor field trials during downhill descent. A MATLAB thermal model successfully predicts the downhill field brake disc temperatures when using the friction data curve fits.
Brake induced heating has become more difficult to control as bicycle component mass has been reduced. High-power braking with insufficient cooling or thermal capacitance can create excessive temperatures, boiling brake fluid, performance degradation, and damage. To better understand component heating, a disc braking dynamometer has been constructed with a motor driven disc, hydraulic braking, and a miniature wind tunnel. Disc temperatures are studied for various braking scenarios using infrared techniques and thermocouples. A transient, numerical, MATLAB, lumped parameter thermal/mechanical model is created to predict the impact of key design parameters on braking performance and to understand the heat loss mechanisms from the brake system components. Computational fluid dynamics (CFD) simulations are used to estimate the disc surface convective cooling coefficients for the model. The final model provides transient temperature predictions based on bicycle velocity and braking power, and successfully matches dynamometer experimental data.
As remote engineering collaboration increases in popularity due to the proliferation of networking tools and the expansion of telework opportunities resulting from the shutdowns of COVID-19, the need to study their efficacy grows. This work examines a collaboration conducted between two geographically separated universities to complete a mechanical engineering design experience. While such an experience may be rare within academic design courses, it undoubtedly reflects the reality of engineering teams in industry and government that are comprised of geographically separated teams. Three teams of students, that each included students from both schools, worked for an academic year to complete three unique capstone projects, with three different advisors. The students were provided various computer-based collaboration tools and encouraged to use them throughout. This work examines their experiences to investigate successes and potential improvements during each design phase, to include consideration of how the provided tools enabled or hindered remote collaboration. Additionally, this work surveyed project sponsors to determine how the remote collaboration teams' performance compared to previous years of collocated teams. Survey data were collected following three significant milestones during the design efforts: preliminary design review (PDR), critical design review (CDR), and the final briefing. Results show that the geographically separated teams performed equivalently to collocated teams, though they encountered challenges during the prototyping and testing design activities.