Densely populated urban megacities, such as the Metropolitan Area of Mexico City, face the ongoing deterioration of air quality. Emissions from industrail factories and internal combustion vehicles are the main sources of pollutants. We have evaluated different transition trends from internal combustion engine vehicles as bus, truck and van, and motorcycle to electric vehicles through 2050. The total vehicle growth follows a second-degree polynomial trend. Bus growth exhibits a linear trend. Truck and van growth display a second-degree polynomial trend. Motorcycle growth also follows a second-degree polynomial trend. We found that the most significant reductions in transportation emissions are observed in , followed by , volatile organic compound (VOC), and particulate matter, with light and heavy vehicles being the primary contributors to total emissions. Mexico City serves as a pilot laboratory where both the challenges and potential solutions to an issue affecting millions of citizens can be observed. If proven effective and practical, these solutions could be applied to other megacities.
Using hydrogen in compression-ignition internal combustion engines can reduce pollutant emissions and improve performance by enabling faster and more complete combustion. However, it is essential to determine the optimal injection timing and duration for both hydrogen and conventional fuels. These factors are critical in engine modeling analysis. This study aimed to analyze pollutant emissions, combustion, and engine performance with oxyhydrogen fumigation applied to an instrumented Ricardo E6 engine running on diesel fuel. This analysis, necessary for developing a new predictive combustion model, was calibrated with experimental data in the Gamma Technologies Suite (GTS) simulator. The results show four main effects when increasing the oxyhydrogen flow rate from 0 to 2.8 L per minute (LPM), at an indicated mean effective pressure (IMEP) of 5.3 bar and a speed of 1500 RPM: (I) NOx levels increased by up to 6%, (II) CO2 levels decreased by 8%, (III) combustion durations remained relatively stable, and (IV) brake specific fuel consumption decreased by 8%. Overall, adding hydrogen to the intake flow of the compression-ignition engine reduced CO2 emissions and enhanced indicated thermal efficiency.