In the ready-made clothing industry, computer aided design (CAD) systems are most commonly used for basic pattern making, grading and marker making processes. Even though there are various software in this area in the market, pattern making process is still performed manually in several ready-made clothing businesses. In this research, the amount of time required for the processes of clothing technical pattern making, modelling, grading and marker making via CAD systems has been compared to time required for the manual method, with the aim of determining the more efficient approach. To this end, time measurements for the steps of these processes, specified by 3 expert pattern designers and 3 CAD operators, were taken and compared. The comparison has been focused on the aspects of processes that made a difference in terms of time, the effect of these processes on total time and the identification of the factors that resulted in the time difference. Upper-body clothing has been chosen as the focus of this study due to the involvement of several steps in the processes of basic pattern making and grading. The acquired data has shown that the process times required for CAD systems have been shorter than those for manual design in every step that have an important place in the pre-production preparation process.
7 April 2023 in International Journal of Clothing Science and Technology
Purpose: This study aims to develop a sports bra with cosmetic microcapsules that supports the breasts and provides an aesthetically upright and lifted posture by using 28 days period.Design/methodology/approach: A fitting process was carried out on provided seamless sports bras to determine the criteria that have to be improved considering the desired properties. The new sports bras were produced after the pattern design was developed; cosmetic microcapsules were applied to some of the bras and some were used as a control group to compare the real cosmetic effects. Female subjects tried the newly developed sports bras in a 28-day wear trial. Measurements were taken at certain periods during the wear trials, and the obtained data were analyzed statistically.Findings: The findings of this study determined that the product provides a decrease in breast girth and increases skin moisture and nipple height after 28 days of regular use due to the effect of cosmetic ingredients released from microcapsules. A great majority of subjects found the breast lifting and supporting property of the sports bra successful and were satisfied with the new shape of the subjects' breasts.Originality/value: Fitting studies were carried out directly on the female body, and the designed and developed encapsulating type sports bra has been transformed into a cosmetic textile product that gains also cosmetic properties. The cosmetic effects of the bra were investigated with wear trials. On the other hand, the nipple height measure term was defined for the first time and added to the literature within the scope of the study.
This study aims to develop an innovative and functional mastectomy bra that addresses the physical, aesthetic, and psychological needs of post-mastectomy women. Mastectomy bras play a vital role in prosthesis stability, body image improvement, and quality of life. Using CLO 3D virtual fitting software-2024.2.214, two bra models were designed and evaluated for ergonomic fit and aesthetic appearance. The virtual prototyping method enabled design evaluation without physical sample production, providing an efficient and sensitive approach for user-centered design. Features such as prosthesis stability, user comfort, and aesthetic elements were optimized, while Tencel–PES–elastane and nylon–elastane fabrics were compared for pressure performance and body fit. Results showed similar performance for both fabrics; however, Tencel was recommended as a sustainable option due to its superior moisture absorption, breathability, and skin-friendly properties. The 3D virtual prototyping method offered an effective evaluation tool while addressing the psychological needs of women who prefer not to participate in physical fittings. This approach presents an innovative and sustainable model that can be applied to the design of other specialized garments. This study presents an innovative contribution by integrating advanced CLO 3D virtual prototyping technology into the design process, enabling ergonomic and aesthetic evaluations without the need for physical samples, especially for women in the sensitive post-operative period. This innovative approach not only streamlines the design process but also establishes a sustainable framework for specialized garment production. The utilization of Tencel–polyester–elastane fabric as a sustainable alternative demonstrates suitable performance in terms of comfort and ergonomic fit while promoting environmentally friendly practices. These findings highlight the significance of digital prototyping methods in garment design and offer a user-centric, eco-conscious model applicable to other specialized garments.
15 March 2024 in International Journal of Clothing Science and Technology
Purpose: This study establishes the principles and process steps of a new basic trousers pattern using measurements obtained according to the rules of the anthropometric measurement system. The newly developed pattern-making system in this study will be called the “Anthropometric Measurements Based Pattern Making System” (AnMePa). It is aimed at producing trousers that are more fitting to the body, thanks to this pattern-making system.Design/methodology/approach: In this research, four pattern-making systems used in many parts of the world were compared with the “Anthropometric Measurements Based Pattern Making System” (AnMePa) with regard to the overall appearance and body fit of trousers prepared according to these systems. 10 virtual mannequins (VM) with different adult female body measurements were created, and trousers patterns were prepared for these mannequins. The trousers’ patterns were made and dressed on the mannequins in a 3D virtual dressing system. The body fit of the virtual garments was evaluated by five experts. The scores given by the experts were evaluated using the fuzzy logic method.Findings: According to the results, it is seen that the new basic trousers pattern developed by utilizing the anthropometric measurement system, AnMePa, provides the best body fit among the basic trousers patterns created according to the other examined pattern-making systems. The combination of 3D virtual dressing and fuzzy logic in the evaluation of garment body fit is considered an innovative method for the future of fashion design and production.Originality/value: In the developed AnMePa, unlike the existing pattern-making systems, values that can be associated with the body measurements of individuals in a way that could be suitable for each community were used instead of constant values in the pattern-making process. Furthermore, the integration of 3D virtual fitting and fuzzy logic in assessing garment fit is considered a pioneering approach with significant implications for the future landscape of fashion design and production.
This study aimed to develop and evaluate cosmetic textiles integrated into sportswear to enhance skin hydration and reduce the appearance of cellulite. The research involved the creation of leggings and long-sleeve shirts treated with microencapsulated natural extracts targeting moisture and anti-cellulite effects. A total of 18 healthy female volunteers participated in the wear trials with a control group and an experimental group wearing the microencapsulated garments. The participants underwent a standardized training procedure, and their skin’s moisture level and cellulite (orange peel) appearance were assessed using Tewameter measurements and thermal imaging. Additionally, dermatological clinical evaluations were performed. The results demonstrated that the microencapsulated products significantly improved skin hydration and reduced cellulite grades compared to the control group. All nine participants in the microencapsulated group displayed negative values for the appearance of orange peel skin, whereas two of the nine participants in the control group exhibited negative cellulite levels, one showed a positive value, and six showed no change at all. Statistical analyses also confirmed the efficacy of the microencapsulated garments. The study highlights the potential of cosmetic textiles in providing added value to sportswear by offering functional skin benefits during physical activity.
27 January 2026 in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
Sıfır atık moda tasarımı, kumaş israfını en aza indirmek amacıyla kalıp yerleşimini tasarım süreciyle bütünleştiren ve böylece maksimum kumaş verimliliğini hedefleyen yenilikçi bir yaklaşımdır. Bu çalışma, hazır giyim sektöründe yaygın olarak kullanılan klasik kalıp hazırlama yöntemi ile sıfır atık moda tasarımına dayalı yap-boz ve mozaik yöntemlerinin karşılaştırmalı olarak değerlendirilmesini amaçlamaktadır. Bu kapsamda, farklı tasarım ve kumaş özelliklerine sahip altı adet 40 beden kadın tunik modeli ele alınmıştır. Her bir model için üç farklı kalıp hazırlama yöntemi uygulanarak dijital ortamda kalıplar oluşturulmuş ve pastal yerleşimleri gerçekleştirilmiştir. Oluşturulan pastalların boyları ve verimlilik oranları analiz edilerek karşılaştırılmıştır. Elde edilen bulgular, yap-boz ve özellikle mozaik yöntemlerinin kumaş israfını azaltmada klasik yönteme kıyasla önemli avantajlar sunduğunu göstermektedir. Mozaik yöntemi birçok modelde en yüksek verimlilik oranlarına ulaşırken (örneğin Model 4’te %90,48), yap-boz yöntemi ise pastal boyunu kısaltma açısından öne çıkmıştır (örneğin Model 3’te 125,59 cm ile en kısa pastal boyu elde edilmiştir). Bu oranlar, özellikle büyük ölçekli üretimlerde ciddi kumaş tasarrufu ve atık azaltımı anlamına gelmektedir. Bununla birlikte, bazı modellerde bu yöntemlerin uygulanması, modelin tasarım formunda yapısal değişiklikler gerektirmiştir. Çalışma, sıfır atık moda tasarımının hazır giyim sektöründe uygulanabilirliğini ortaya koyarak sürdürülebilir üretim modellerinin geliştirilmesine katkı sunmayı hedeflemektedir.