Canning or boiling pulse seeds in water produces a by-product solution, called “aquafaba”, that can be used as a plant-based emulsifier. One of the major problems facing the commercialization of aquafaba is inconsistency in quality and functionality. In this study, chickpea aquafaba production and drying methods were optimized to produce standardized aquafaba powder. Aquafaba samples, both freeze-dried and spray-dried, were used to make egg-free, vegan mayonnaise. Mayonnaise and analog physicochemical characteristics, microstructure, and stability were tested and compared to mayonnaise prepared using egg yolk. Chickpeas steeped in water at 4 °C for 16 h, followed by cooking at 75 kPa for 30 min at 116 °C, yielded aquafaba that produced the best emulsion qualities. Both lyophilization and spray drying to dehydrate aquafaba resulted in powders that retained their functionality following rehydration. Mayonnaise analogs made with aquafaba powder remained stable for 28 days of storage at 4 °C, although their droplet size was significantly higher than the reference sample made with egg yolk. These results show that aquafaba production can be standardized for optimal emulsion qualities, and dried aquafaba can mimic egg functions in food emulsions and has the potential to produce a wide range of eggless food products.
Aquafaba (AQ), a viscous by-product solution produced during cooking chickpea or other legumes in water, is increasingly being used as an egg replacement due to its ability to form foams and emulsions. The objectives of our work were to select a chickpea cultivar that produces AQ with superior emulsion properties, and to investigate the impact of chickpea seed physicochemical properties and hydration kinetics on the properties of AQ-based emulsions. AQ from a Kabuli type chickpea cultivar (CDC Leader) had the greatest emulsion capacity (1.10 ± 0.04 m2/g) and stability (71.9 ± 0.8%). There were no correlations observed between AQ emulsion properties and chickpea seed proximate compositions. Meanwhile, AQ emulsion properties were negatively correlated with AQ yield and moisture content, indicating that AQ with higher dry-matter content displayed better emulsion properties. In conclusion, the emulsification properties of aquafaba are greatly influenced by the chickpea genotype, and AQ from the CDC Leader chickpea produced the most stable food oil emulsions.
Torrefied pellets have gained more commercial importance due to their excellent performance in combustion, co-firing and gasification. The present investigation provides a conceptual design for torrefied fuel pellets production via combined torrefaction and pelletization technologies with and without additives. The entire design contains torrefaction unit, grinding, preparation of pellet formulation, pelletizing, and finally cooling of pellets. Two scenarios, scenario 1 (pelletization of torrefied biomass with additives) and scenario 2 (pelletization of torrefied biomass without any external additives) were tested and compared. The economic analysis suggests that both scenarios are profitable. Both scenarios were simulated using Aspen plus™, and economic feasibility was estimated using a complete cash flow analysis for a base case plant with 40,080 tonne/y capacity. For both cases, a discounted cash flow is a useful tool for estimating the minimal selling price for torrefied pellets as well as the capital investment, production cost and operating costs. The cost of the reactor used for torrefaction was found to be the most important component of combined torrefaction and pelletization system. The lowest selling price of generated torrefied pellets was found to be $103.4 and $105.1 per tonne at the plant gate for scenarios 1 and 2, respectively. Sensitivity analysis shows that, among all variable costs, labor cost has the highest influence on both net present value (NPV) and minimum selling price (MSP) in making pellets for both the scenarios. Furthermore, the internal rate of return was found to be25% and 22% at 10% discounted cash flow rate for scenarios 1 and 2, respectively. The framework that was created was found to lessen over-dependence on wood or fossil fuels and facilitate the promotion of bioenergy in rural areas.