This paper presents the analysis of electrical and dielectric properties of the yttrium-doped nickel ferrite nano-powders synthesized using the co-precipitation method. Impedance and dielectric measurements have been carried out as a function of frequency at different temperatures from 200 to 25 °C in the range of 0.1 kHz–1 MHz. In order to investigate the conduction mechanism and highlight the role of yttrium doping in different concentrations, impedance spectroscopy was employed. The obtained data were analyzed in terms of equivalent circuits made of resistor and capacitor components describing the contributions from different electrical active regions in a material. Further, this study highlights the importance of a single constant phase element (CPE) in the description of dispersion behavior of the impedance response of the investigated samples in the given frequency range. The use of this technique enabled the characterization of grain and grain boundaries contribution in overall conductivity mechanism. The dielectric dispersion nature of all investigated materials is reflected in this study. Very high values of the real part of permittivity at low frequencies are assigned to space-charge polarization. The dependence of the real part of dielectric permittivity values of the yttrium content was also discussed. Doping with yttrium in different concentrations that reflects in different electric and dielectric responses is concluded in this study. The greatest change is noticed for the sample with the minimum dopant content for a x = 0.05 atomic percent share of yttrium. To reveal the potential role of more than one ion contribution to the overall relaxation process in investigated compounds, a modified Debye’s equation was utilized.
The study comprehensively investigates the design and performance of self-cleaning surfaces fabricated by coating aluminum foil with an acrylic paint matrix enriched with different content of titanium dioxide (TiO2) nanoparticles. The main goal was to assess the self-cleaning characteristics of the surfaces obtained. This study employs scanning electron microscopy (SEM) to analyze the morphology of TiO2-modified acrylic surfaces, revealing spherical particles. Raman spectroscopy elucidates signatures characterizing TiO2 incorporation within the acrylic matrix, providing comprehensive insights into structural and compositional changes for advanced surface engineering. Alternating current (AC) impedance spectroscopy was used to assess selected charge transport properties of produced self-cleaning surfaces, allowing us to gain valuable insights into the material’s conductivity and its potential impact on photocatalytic performance. The self-cleaning properties of these tiles were tested against three frequently used textile dyes, which are considered to pose a serious environmental threat. Subsequently, improving self-cleaning properties was achieved by plasma treatment, utilizing a continuous plasma arc. The plasma treatment led to enhanced charge separation and surface reactivity, crucial factors in the self-cleaning mechanism. To deepen our comprehension of the reactive properties of dye molecules and their degradation dynamics, we employed a combination of density functional tight binding (DFTB) and density functional theory (DFT) calculations. This investigation lays the foundation for advancing self-cleaning materials with extensive applications, from architectural coatings to environmental remediation technologies.
24 October 2015 in Journal of Materials Science: Materials in Electronics
This paper presents a comprehensive analysis of the dead-time effects in wireless power transfer systems based on LCC-S topology. In these systems operating at high frequencies, the ratio of dead-time versus the operating period becomes critical, and the dead-time issue can cause certain problems regarding power quality, efficiency, and output voltage ripple. The impact of input quantities such as voltage and switching frequency on the efficiency and output power of the LCC-S-tuned WPT system was also investigated. The optimal combination of these parameters used to achieve the maximum efficiency for a target output power and to set the appropriate value of the dead time were determined by running multiple simulations using the MATLAB R2023b software platform. It was also shown that the output voltage remained unchanged with and without a load and up to 1200 ns of dead-time, which provides a simple implementation of the corresponding mathematical model. In the recommended interval of 600–1500 ns, the influence of the dead-time on the value of the output voltage amplitude is less than 10%. The validity of the proposed method was confirmed through the implementation of the experimental prototype, a 5 kW wireless power transmission system, and the obtained results were in accordance with the simulation results.
18 March 2012 in Journal of Thermal Analysis and Calorimetry