This study deals with the separation and detection methods for 12 synthetic musk compounds (SMCs), which are some of the emerging contaminants in fish samples, are widely present in environmental media, and can be considered serious risks due to their harmful effects. For the separation of co-extracted substances and the target SMCs in fish samples after ultrasonic extraction, four solid-phase extraction (SPE) sorbents were investigated. The recoveries of SMCs from 10 mL of eluent, as optimized by the elution profile, were within the acceptable range of 80–120% in all SPE types, and it was found that nitro musk and polycyclic musk compounds were separated more clearly in Florisil SPE than others (Aminopropyl, Alumina-N, PSA). Furthermore, the results of measuring the matrix effects by each SPE through the spiking experiments showed that Florisil SPE was superior. The comparison of a gas chromatograph-single quadrupole mass spectrometer (GC-SQ/MS) with selected ion monitoring (SIM) mode and GC-triple quadrupole mass spectrometer (GC-QqQ-MS/MS) with multiple reaction monitoring (MRM) modes regarding the detection method of SMCs showed that the method detection limits (MDLs) of SMCs were on average ten times lower when GC-QqQ-MS/MS with MRM mode was used. The differences between the two methods can provide essential information for selecting an analytical method in related research fields that require appropriate detection levels, such as risk assessment or pollution control.
Amino acids (AAs), a type of nitrogen-based organic compounds in the atmosphere, are directly and indirectly related to climate change, and as their link to allergic diseases becomes more known, the need for quantitative analysis of ultrafine dust (PM2.5) will become increasingly necessary. When sensing water-soluble AAs using a gas chromatograph combined with a tandem mass spectrometer (GC-MS/MS), derivatization should be considered to increase the volatility and sensitivity of target analytes. In this study, two methods were used to compare and evaluate 13 AA derivatives in PM2.5 samples: N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide with 1% tert-butyldimethylchlorosilane (MTBSTFA w/1% t-BDMCS), which is preferred for silylation, and ethyl chloroformate (ECF) with methanol (MeOH) for chloroformate derivatization. The most appropriate reaction conditions for these two derivative methods, such as temperature and time, and the analytical conditions of GC-MS/MS for the qualitative and quantitative analysis of AAs were optimized. Furthermore, the calibration curve, detection limit, and recovery of both methods for validating the quantification were determined. The two derivative methods were applied to 23 actual PM2.5 samples to detect and quantify target AAs. The statistical significances between pairwise measurements of individual AAs detected by both methods were evaluated. This study will help in selecting and utilizing appropriate derivative methods for the quantification of individual AAs in PM2.5 samples.
Synthetic musk compounds (SMCs) are emerging contaminants frequently detected in aquatic environments due to their widespread use in personal care and household products. This study investigated the occurrence, environmental drivers, and ecological risks of twelve SMCs in the Han River estuary and adjacent coastal waters, Korea, using three years of monitoring data (2020–2022). A total of 222 water samples from 13 monitoring stations were analyzed by GC–MS. 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-(g)-2-benzopyran (HHCB) was the dominant compound, followed by musk ketone (MK). Total SMC concentrations ranged from non-detectable levels to 157.6 μg/L, with the highest concentrations consistently observed at wastewater treatment facilities. XGBoost-SHAP analysis identified total nitrogen (TN) as the most influential predictor of SMC occurrence. This association reflects the shared wastewater origin of the two rather than any causal link, so that TN serves as an indicator of wastewater influence rather than of SMC concentration itself. Ecological risks were evaluated using Monte Carlo-based probabilistic hazard quotient (HQ) analysis. HHCB and MK exhibited the highest risks, with mean HQ values exceeding 1.0 at wastewater treatment facilities, indicating potential ecological concern. In contrast, most coastal sites showed low risk levels. The observed spatial patterns identified wastewater discharge zones as major hotspots of SMC exposure and ecological risk. These findings highlight the importance of wastewater-derived SMCs as emerging contaminants in estuarine environments and demonstrate the utility of integrating long-term monitoring, explainable machine learning, and probabilistic risk assessment for ecological risk characterization.
Volatile organic compounds (VOCs) are key precursors of ozone and secondary pollutants, yet transport-related changes in their composition between upwind and downwind regions remain insufficiently characterized. Simultaneous high-time-resolution measurements were conducted at an urban site in the Seoul Metropolitan Area (SMA) and a suburban downwind site in Chuncheon, South Korea, from 3 to 18 June 2024. Thirteen VOC species were measured using proton-transfer-reaction time-of-flight mass spectrometry (PTR-ToF-MS) and evaluated using backward trajectory clustering, concentration-weighted trajectory analysis, ozone formation potential (OFP), and a toluene-to-benzene ratio-based photochemical aging proxy. The summed concentration of the 13 measured VOC species was higher in SMA (40.24 ± 19.41 ppb) than in Chuncheon (18.28 ± 6.39 ppb), while oxygenated VOCs accounted for approximately 80% at both sites. In Chuncheon, VOC composition and OFP varied descriptively among air-mass clusters, with westerly and southwesterly pathways passing through or near SMA associated with relatively elevated aromatic VOC concentrations and OFP. Equivalent photochemical age overlapped substantially among clusters and was not directly proportional to VOC concentration or OFP. These results indicate that downwind VOC characteristics reflect the combined effects of source composition, transport, dilution, atmospheric mixing, and chemical processing.