Alkoxy-based consolidants are widely used for conservation of cultural heritage objects made from sandstones. Even if such consolidants were introduced into practice already in the 19th century, their performance has been enhanced by several modifications to their composition only recently. To obtain a relevant comparison of their application potential, both commercial (Remmers KSE OH and SurfaPore FX SB) and a self-developed particle-modified ethyl silicate consolidant supplemented with two phosphate-based ones, were assessed. Importantly, the potential toxicity of our novel consolidants was considered. Since the stone substrate should mimic the properties of naturally weathered stone, sandstone from the Msene quarry in Central Bohemia, characterized by a high porosity and relatively low mechanical strength, is selected. From practical point of view, the long-term durability of the consolidation effect is crucial compared to the initial level of consolidation. Regarding the determination of durability of the sandstone consolidation according to an American Society for Testing and Materials (ASTM) accelerated weathering test, we performed mechanical tests in micro- (nanoindentation) and macroscale (drilling resistance measurements). The cohesion of the consolidant xerogels in the pores were determined by sorption experiments in gas phase. The durability of our TiO2 and ZnO particle-modified consolidants is superior to that of the commercial products. The aqueous diammonium hydrogen phosphate-based consolidant, which also shows exceptional durability, reveals itself to be a promising product for not only carbonate but also sandstone materials.
This work describes the preparation of highly homogeneous thermoplastic starches (TPS’s) with the addition of 0, 5, or 10 wt.% of maltodextrin (MD) and 0 or 3 wt.% of TiO2 nanoparticles. The TPS preparation was based on a two-step preparation protocol, which consisted in solution casting (SC) followed by melt mixing (MM). Rheology measurements at the typical starch processing temperature (120 °C) demonstrated that maltodextrin acted as a lubricating agent, which decreased the viscosity of the system. Consequently, the in situ measurement during the MM confirmed that the torque moments and real processing temperatures of all TPS/MD systems decreased in comparison with the pure TPS. The detailed characterization of morphology, thermomechanical properties, and local mechanical properties revealed that the viscosity decrease was accompanied by a slight decrease in the system homogeneity. The changes in the real processing temperatures might be quite moderate (ca 2–3 °C), but maltodextrin is a cheap and easy-to-add modifier, and the milder processing conditions are advantageous for both technical applications (energy savings) and biomedical applications (beneficial for temperature-sensitive additives, such as antibiotics).
1 August 2015 in Journal of Biomechanical Engineering
Knowledge of the anisotropic elastic properties of osteon and osteonal lamellae provides a better understanding of various pathophysiological conditions, such as aging, osteoporosis, osteoarthritis, and other degenerative diseases. For this reason, it is important to investigate and understand the elasticity of cortical bone. We created a bidirectional micromechanical model based on inverse homogenization for predicting the elastic properties of osteon and osteonal lamellae of cortical bone. The shape, the dimensions, and the curvature of osteon and osteonal lamellae are described by appropriately chosen curvilinear coordinate systems, so that the model operates close to the real morphology of these bone components. The model was used to calculate nine orthotropic elastic constants of osteonal lamellae. The input values have the elastic properties of a single osteon. We also expressed the dependence of the elastic properties of the lamellae on the angle of orientation. To validate the model, we performed nanoindentation tests on several osteonal lamellae. We compared the experimental results with the calculated results, and there was good agreement between them. The inverted model was used to calculate the elastic properties of a single osteon, where the input values are the elastic constants of osteonal lamellae. These calculations reveal that the model can be used in both directions of homogenization, i.e., direct homogenization and also inverse homogenization. The model described here can provide either the unknown elastic properties of a single lamella from the known elastic properties at the level of a single osteon, or the unknown elastic properties of a single osteon from the known elastic properties at the level of a single lamella.
We prove that convex sets are measure convex and extremal sets are measure extremal provided they are of low Borel complexity. We also present examples showing that the positive results cannot be strengthened.
9 October 2025 in International Journal of Biological Macromolecules