In this article, a wheel life prediction model considering wear and rolling contact fatigue (RCF) is developed and applied to a heavy-haul locomotive. For wear calculations, a methodology based on Archard's wear calculation theory is used. The simulated wear depth is compared with profile measurements within 100,000 km. For RCF, a shakedown-based theory is applied locally, using the FaStrip algorithm to estimate the tangential stresses instead of FASTSIM. The differences between the two algorithms on damage prediction models are studied. The running distance between the two reprofiling due to RCF is estimated based on a Wöhler-like relationship developed from laboratory test results from the literature and the Palmgren-Miner rule. The simulated crack locations and their angles are compared with a five-year field study. Calculations to study the effects of electro-dynamic braking, track gauge, harder wheel material and the increase of axle load on the wheel life are also carried out.
A successful predictive maintenance strategy for wheels and rails depends on an accurate and robust modelling of damage evolution, mainly uniform wear and Rolling Contact Fatigue (RCF). In this work a life prediction framework for wheels and rails is presented. The prediction model accounts for wear, RCF, and their interaction based on the output from MBS simulations to calculate the remaining life of the asset, given in mileage for wheels and MGTs for rails. Once the model is calibrated, the proposed methodology can predict the sensitivity of the maintenance intervals against changes in operational conditions, such as changes in contact lubrication, track gauge, operating speeds, etc. The prediction framework is then used in two operational cases on the Swedish Iron-Ore line. The studied cases are, the analysis of wheel life for the locomotives, and the analysis of rail life for gauge widening scenarios. The results demonstrate the capabilities of the MBS-based damage modelling for predictive maintenance purposes and showcase how these techniques can set the path towards Digital Twins of railway assets.
Wheel reprofiling costs for freight vehicles are a major issue in Sweden, reducing the profitability of freight traffic operations and therefore hindering the modal shift needed for achieving reduced emissions. In order to understand the damage modes in freight vehicles, uniform wear prediction with Archard's wear law has been studied in a two-axle timber transport wagon, and simulation results have been compared to measurements. Challenges of wheel wear prediction in freight wagons are discussed, including the influence of block brakes and switches and crossings. The latter have a major influence on the profile evolution of this case study, so specific simulations are performed and a thorough discussion is carried out.
26 April 2017 in Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
The renewal costs for wheels and rails are a substantial part of the costs for rolling stock operators and infrastructure managers all over the world. The causes for reprofiling or grinding are, in most cases, related to the following: (1) wheel or rail profiles with unacceptable wear, (2) appearance of rolling contact fatigue cracks in the surface, and (3) wheel flats caused by locking wheels during braking. The first two causes are related to the dynamic behavior of the vehicle–track system, and can be predicted using multibody simulations. However, there are several limitations that restrain the usefulness of these prediction techniques, such as simulation time constraints, necessary simplifications, and lack of experimental data that lead to educated assumptions. In this paper, we take the end-user perspective in order to show whether the latest developments in wheel–rail damage prediction can be integrated in a simplified framework, and subsequently used by the different stakeholders for an improved management of the different assets involved in the operation of rail vehicles.