A novel 2 b dual-band multifunction active frequency selective surface is proposed. The frequency response of the surface is guided by four binary states controlled via direct current supply biasing of two p-i-n diodes. The binary combination states 00 and 11 offer transmission at center frequencies of 2.3 and 5 GHz and shield to bands at 5 and 2.3 GHz for transverse electric/transverse magnetic modes, respectively. The related fractional bandwidths of the lower and upper frequency bands are 127% and 75% with insertion losses of 0.5 and 0.2 dB, respectively. The binary state 10 offers transmission at 2.3 GHz frequency and shields to the passbands at 5 GHz frequency when the incident-plane wave is transverse electric (TE)-polarized. The binary state 01 allows transmission at 5 GHz frequency and shields to the passband at 2.3 GHz frequency when the incident plane wave is transverse magnetic (TM)-polarized. The design of the structure is flexible to electromagnetic switching and polarization selection for the two bands with the advantage of low insertion loss in the passbands. The prototype of the structure is fabricated and measured, transmission response at all binary states concurs well with the full-wave simulated transmission response.
23 September 2022 in IEEE Transactions on Electromagnetic Compatibility
In this article, a compact single layer band stop frequency selective surface (FSS) with superior resonant stability is presented. The proposed FSS unit comprises of a symmetrically modified square loop. The square loop has been modified in order to increase the perimeter. Moreover, modified square loop is arranged in C4 rotational symmetry to ensure the polarization independence. The designed FSS exhibits highly stable response for the incident angle variation from 0° to 86°. At the resonant frequency of 5.54 GHz, its miniaturized unit cell size is 0.09 λ0 × 0.09 λ0 and the thickness is only 0.007 λ0 . The operating phenomenon of this FSS is explicated by analyzing the equivalent circuit model, electric field and surface current distributions at resonant frequency. A test sample of the designed FSS has been constructed for the validation purpose. The transmission coefficients response of the proposed FSS has been measured and found to be congruent with the simulated responses. The salient features that distinguish the proposed FSS design over others are low complexity, low thickness, compact unit cell and excellent angular stability.
27 April 2020 in IEEE Transactions on Electromagnetic Compatibility
In this article, a triband frequency selective surface (TBFSS) with narrow band separation is proposed. Pass band frequencies of this TBFSS are 6.9, 8.63 and 10.3 GHz with fractional band width (FBW) of $\text{15.8\%}$ , $\text{13.5\%}$ , and $\text{10.9\%}$ , respectively. Low insertion losses of 0.5, 0.2, and 0.4 dB are observed in the pass bands. These resonant frequencies are adjusted in C and X bands. The unit cell (UC) dimension is $0.2\lambda _0\times 0.2\lambda _0$ which is calculated at lowest transmission zero. Hybrid structural elements are etched on two sides of Rogers 4003 C substrate with $\varepsilon _r$ of 3.38 and thickness of substrate is selected to be 0.406 mm. This design is highly obliquely stable upto $\text{75}^\circ$ . It also shows polarization insensitivity to transverse electric (TE) and transverse magnetic (TM) modes of the plane wave. An equivalent circuit is presented for better understanding of the structure and tuning purpose. A prototype is fabricated to measure the frequency response of the TBFSS. Measured and simulated scattering parameter S $_{21}$ exhibit very good match.
30 April 2021 in IEEE Antennas and Wireless Propagation Letters
In this letter, a novel 4 b multistate frequency-selective surface is proposed. Four p-i-n diodes are used to maneuver multifunction behavior of the structure with seven different functional states. The 4 b binary state operations 0000, 1100, 0011, and 1111 offer transverse electric (TE)/transverse magnetic (TM) waves both transmit, TE transmit/TM shield, TM transmit/TE shield, and TE/TM both shield, respectively, at 2 GHz frequency. The passband at 2 GHz frequency has $-\text{10}$ dB fractional bandwidth of 117%. The binary states 1101 and 1110 are symmetric, which select the TE wave transmit/TM wave shield to the passband at 3.45 GHz frequency with $-\text{10}$ dB fractional bandwidth of 49%, whereas binary states 1011 and 0111 allow the TM wave to transmit at 3.45 GHz and shield the TE wave. The four symmetric binary states 0101, 0110, 1010, and 1001 provide transmission band at 3.45 GHz frequency for dual-polarized plane wave incidence. The transmission of both the passbands can be shielded by selecting the binary state equal to 1111. An equal circuit model is used to elaborate the contribution of different passive structural elements in terms of lumped components. A prototype of the structure is fabricated, and transmission coefficients for different states at normal and oblique incidence of the electromagnetic plane wave are measured, which verifies the simulated responses of the structure.
In this paper, a chiral metasurface is presented to effectively attain an ultra-broadband operation of asymmetric transmission with highly efficient cross-polarization conversion. The efficiency of the asymmetric transmission operation in the frequency band ranging from 6.5 to 13 GHz is above 70%. Additionally, in the frequency range from 3.7 to 14 GHz, the cross-polarization conversion realizes greater than 90% polarization conversion ratio. Asymmetric transmission as well as cross-polarization conversion show angular stability against the incident angle of electromagnetic waves up to 45°. To validate the simulation results, the fabricated chiral metasurface is tested and compared with simulation results. The concepts of asymmetric transmission and linear-polarization conversion are demonstrated and physically explained through the distributions of surface currents over metallic layers. This anticipated work has significant applications in telecommunications and radar, as well as potential use in equipment designed for the manipulation of electromagnetic waves.
A dual band reconfigurable active frequency selective surface is designed which resonates at 2.5 and 3.6 GHz as transmission pole frequencies. Lower and upper pass bands have −3 dB bandwidths of 0.4 and 0.5 GHz, respectively. Two notch frequencies are configured from 4.71 to 3.5 GHz and from 2.78 to 2.45 GHz. Dimensions of the unit cell are optimized toλ0/10 calculated at the lowest resonance. The proposed design exhibits insignificant variation at oblique excitation angles until 75° of dual polarized plane wave. An equivalent circuit model is developed for optimization and vivid understanding of the structure behaviour. A prototype of the designed structure is fabricated and the measured response is in satisfactory agreement with the simulated transmission response. High angle stability, low insertion loss at both the transmission pole frequencies, dual band pass/stop tuning for single and dual polarized wave with use of only two varactor diodes are eminent features of the design.