Lizheng Wang

Mr. Lizheng Wang

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 April 2024 in Water
Verified
Journal Article
Open access
PDF file
ZZZi Jia Zheng
Zi Jia Zheng
YJYizhu Jiang
Yizhu Jiang
QZQiutong Zhang
Qiutong Zhang
YZYanling Zhong
Yanling Zhong
LWLizheng Wang
Lizheng Wang
The timely monitoring of urban water bodies using unmanned aerial vehicle (UAV)-mounted remote sensing technology is crucial for urban water resource protection and management. Addressing the limitations of the use of satellite data in inferring the water quality parameters of small-scale water bodies due to their spatial resolution constraints and limited input features, this study focuses on the Zao River in Xi’an City. Leveraging UAV multispectral imagery, a feature selection method based on Relief Feature Ranking with Recursive Feature Elimination (Relief F-RFE) is proposed to determine the quality parameters of the typical urban pollution in water (dissolved oxygen (DO), total nitrogen (TN), turbidity, and chemical oxygen demand (COD). By constructing a potential feature set and utilizing optimal feature combinations, inversion models are developed for the four water quality parameters using three machine learning (ML) algorithms (Random Forest (RF), Support Vector Regression (SVR), Light Gradient Boosting Machine (LightGBM). The inversion accuracies of the different models are compared, and the spatial distribution of the four water quality parameters is analyzed. The results show that the models constructed based on UAV-based multispectral remote sensing imagery perform well in inferring the water quality parameters of the Zao River. The SVR algorithm, based on Relief F-RFE feature selection, achieves a higher accuracy, with RMSE values of 7.19 mg/L, 1.14 mg/L, 3.15 NTU, and 4.28 mg/L, respectively. The methods and conclusions of this study serve as a reference for research on the inversion of water quality parameters in urban rivers.

14 June 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
DLDingMing Liu
DingMing Liu
LWLizheng Wang
Lizheng Wang
YZYanling Zhong
Yanling Zhong
YDYi Dong
Yi Dong
JKJinling Kong
Jinling Kong
Personalized travel itinerary recommendation algorithms are the focus of research in smart tourism and tourism GIS. Aiming to address issues present in travel itinerary recommendations for the increasingly popular “self-drive tour” mode, this study proposes an algorithm based on comprehensive tourist satisfaction to mitigate problems such as the neglect of important relevant factors and low degree of personalization. First, we construct a model of tourist satisfaction for travel itineraries by comprehensively considering factors including time utilization, the attractiveness of attractions, itinerary feasibility, and the diversity of attraction types. Unlike previous studies, we consider dining and accommodation time during the itinerary, the physical condition of tourists, and the diversity of attraction types, and establish penalty functions to flexibly constrain deviations from the expected conditions in itinerary planning. Then, with the optimization of comprehensive tourist satisfaction as the objective, we design a new algorithm to address the itinerary recommendation problem, supporting tourists in selecting must-visit attractions, restaurants, and hotels, as well as personalized preferences such as the sightseeing sequence. The experimental results demonstrate that our proposed algorithm outperforms two baseline algorithms, providing higher comprehensive tourist satisfaction while also exhibiting greater feasibility in itinerary planning. The proposed algorithm effectively addresses the issue of personalized travel itinerary recommendation, presenting an efficient, feasible, and practical solution.

4 March 2025 in Water
Verified
Journal Article
Open access
PDF file
LWLizheng Wang
Lizheng Wang
LDLixin Dong
Lixin Dong
QZQiutong Zhang
Qiutong Zhang
Evapotranspiration (ET) plays a pivotal role in linking the water and carbon cycles between the land and atmosphere, with latent heat flux (LE) representing the energy manifestation of ET. Due to adverse meteorological conditions, data quality filtering, and instrument malfunctions, LE measured by the eddy covariance (EC) is temporally discontinuous at the hourly and daily scales. Machine-learning (ML) models effectively capture the complex relationships between LE and its influencing factors, demonstrating superior performance in filling LE data gaps. However, the selection of features in ML models often relies on empirical knowledge, with identical features frequently used across stations, leading to reduced modeling accuracy. Therefore, this study proposes an LE gap-filling model (SHAP-AWF-BO-LightGBM) that combines the Shapley additive explanations adaptive weighted fusion method with the Bayesian optimization light gradient-boosting machine algorithm. This is tested using data from three stations in the Heihe River Basin, China, representing different plant functional types. For 30 min interval missing LE data, the RMSE ranges from 17.90 W/m2 to 20.17 W/m2, while the MAE ranges from 10.74 W/m2 to 14.04 W/m2. The SHAP-AWF method is used for feature selection. First, the importance of SHAP features from multiple ensemble-learning models is adaptively weighted as the basis for feature input into the BO-LightGBM algorithm, which enhances the interpretability and transparency of the model. Second, data redundancy and the cost of collecting other feature data during model training are reduced, improving model calculation efficiency (reducing the initial number of features of different stations from 42, 46, and 48 to 10, 15, and 8, respectively). Third, under the premise of ensuring accuracy as much as possible, the gap-filling ratio for missing LE data at different stations is improved, and the adaptability of using only automatic weather station observation is enhanced (the improvement range is between 7.46% and 11.67%). Simultaneously, the hyperparameters of the LightGBM algorithm are optimized using a Bayesian algorithm, further enhancing the accuracy of the model. This study provides a new approach and perspective to fill the missing LE in EC measurement.

31 August 2024 in Toxics
Verified
Journal Article
Open access
PDF file
YZYanling Zhong
Yanling Zhong
YGYong Guo
Yong Guo
DLDingMing Liu
DingMing Liu
QZQiutong Zhang
Qiutong Zhang
LWLizheng Wang
Lizheng Wang
Long-term exposure to PM2.5 pollution increases the risk of cardiovascular diseases, particularly ischemic heart disease (IHD). Current assessments of the health effects related to PM2.5 exposure are limited by sparse ground monitoring stations and applicable disease research cohorts, making accurate health effect evaluations challenging. Using satellite-observed aerosol optical depth (AOD) data and the XGBoost-PM25 model, we obtained 1 km scale PM2.5 exposure levels across China. We quantified the premature mortality caused by PM2.5-exposure-induced IHD using the Global Exposure Mortality Model (GEMM) and baseline mortality data. Furthermore, we employed the Gini coefficient, a measure from economics to quantify inequality, to evaluate the distribution differences in health impacts due to PM2.5 exposure under varying socioeconomic conditions. The results indicate that PM2.5 concentrations in China are higher in the central and eastern regions. From 2007 to 2022, the national overall level showed a decreasing trend, dropping from 47.41 μg/m3 to 25.16 μg/m3. The number of premature deaths attributable to PM2.5 exposure increased from 819 thousand in 2007 to 870 thousand in 2022, with fluctuations in certain regions. This increase is linked to population growth and aging because PM2.5 levels have decreased. The results also indicate disparities in premature mortality from IHD among different economic groups in China from 2007 to 2022, with middle-income groups having a higher cumulative proportion of IHD-related premature deaths compared with high- and low-income groups. Despite narrowing GDP gaps across regions from 2007 to 2022, IHD consistently “favored” the middle-income groups. The highest Gini coefficient was observed in the Northwest (0.035), and the lowest was in the South (0.019). Targeted policy interventions are essential to establish a more equitable atmospheric environment.

22 December 2024 in Agriculture
Verified
Journal Article
Open access
PDF file
QZQiutong Zhang
Qiutong Zhang
JKJinling Kong
Jinling Kong
LWLizheng Wang
Lizheng Wang
XWXixuan Wang
Xixuan Wang
ZZZaiyong Zhang
Zaiyong Zhang
YZYanling Zhong
Yanling Zhong
Soil moisture is one of the main factors influencing evapotranspiration (ET) under soil water stress conditions. The TSEBSM model used soil moisture to constrain soil evaporation. However, the transpiration schemes constrained by soil moisture require greater physical realism and the soil evaporation schemes parameters usually need calibration. In this study, the TSEBSM model was enhanced by incorporating Jarvis’s canopy resistance which considered the influence of soil moisture on transpiration schemes. We assessed the new model (TSEBSM+) in the Heihe and Haihe basins of China. The TSEBSM+ model displayed a consistency to the TSEB in the ET estimation at the A’rou site, but approximately 30% and 35% reductions in RMSEs at the Huazhaizi and Huailai sites. It produced approximately 20% and 10% of the reductions in the ET RMSEs at the Huailai and A’rou sites compared to the TSEBSM model, but had a similar performance at the Huazhaizi site. Moreover, the TSEBSM+ model estimated ET in the Heihe River Basin with an RMSE of 0.58 mm·day−1, and it was sensitive to the soil moisture, particularly when the soil moisture was below 30%. In conjunction to soil moisture, the TSEBSM+ model could potentially be a more effective tool for monitoring the ET.

13 March 2026
Verified
Conference Paper
Open access
LDLixin Dong
Lixin Dong
LWLizheng Wang
Lizheng Wang
STShihao Tang
Shihao Tang
Scarce in situ data in the western and central Tibetan Plateau (TP) hinders scientific research on physical process representation in climate models. Satellite remote sensing and climate models are effective data sources in complex topography and harsh environments; however, they have not been effectively validated or improved for the lack of multi-scale observations matching their pixel or grid scales. Therefore, it is necessary to develop an integrated multi-scale observatory. Since 2014, a satellite pixel oriented TP Integrated Multi-Scale moisture and temperature Observatory (TP-IMSO) was established and has been in operation for ten years to obtain a long-term multi-scale soil temperature and moisture dataset which integrates site point and spatial surface observation designs. The TP-IMSO is composed of two automatic wireless transmission networks over the Naqu and A’li areas, and atmospheric and soil temperature and humidity vertical profile observations in the “soil – atmosphere” interface layer. We also develop a dual frequency remote data transmission system based on Beidou satellite and 4G and a dual power supply system that is resistant to low temperature and low pressure in high-altitude regions. A cube dataset of soil temperature and humidity was obtained through spatial interpolation in both horizontal and vertical directions within the soil. It is found that the elements of the TP-IMSO networks have a highly variable character. The soil moisture in the top layer (0-3cm) is more variable than that in other layers, and the largest standard deviation of all the five layers occurs in July. Using observation data to validate multiple soil moisture remote sensing products, the root mean squared error (RMSE) of remote sensing products ranges from 0.038 to 0.177 cm3·cm-3, and for ERA-interim and National Centers for Environmental Prediction (NCEP) reanalysis data, the RMSE ranges from 0.038 to 0.081 cm3﹒cm-3.