In this study, a new model for analyzing delaminated plates was developed using three-dimensional (3D) degenerated elements. The elements were developed using the degenerated solid approach based on Reissner-Mindlin assumptions. Thus, the shear deformation and rotary inertia effect were considered, and the 3D field was reduced to a two-dimensional (2D) field in terms of midsurface nodal variables. The delamination was incorporated using Heaviside step functions. The proposed model was found to be very accurate and also faster in comparison with layerwise/higher-order theories. Results for natural frequencies of plates and beams with and without delamination were compared with theoretical and experimental results available in the literature and were in excellent agreement. New results were generated using the proposed method for different boundary conditions, ply orientations, size of delamination, and location of delamination; these will serve as benchmarks for future research.
The present paper deals with a two-stage inverse technique to locate and quantify the delamination damage in composite beams. The first few bending modes are used for damage detection. Initially, the bending mode shapes of the damaged beams are converted to curvature. A gapped smoothing method is applied on the damaged curvature to obtain a damage index, which yields the rough location of the damage along the length of the beam. In the second stage, a unified particle-swarm-optimization-based inverse algorithm is formulated to calculate the size, location, and interface of the damage more accurately by minimizing frequency- and mode-shape-based objective functions. The algorithm detects the single and multiple delaminations accurately, along with the damage interfaces. The results obtained in the experimental investigation of the present method are also mentioned. Overall, the present two-stage method shows good promise in the field of the delamination detection of a composite structure.