Pneumatic conveying technology is an efficient, energy-saving and environmentally friendly means of solid feed conveying. In the process of pneumatic conveying, wind speed has a decisive influence on conveying characteristics. Here, computational fluid dynamics coupled with a discrete element method simulation and experiment were combined, and the conveying wind speed was used as the experimental variable to study the conveying characteristics of the conveying material in the tube, such as particle distribution state, solid phase mass concentration, coupling force on solid feed, average speed and pressure drop of solid feed in the pipe. The results show that when the conveying wind speed increases from 18 m/s to 20.6 m/s, the solid feed changes from sedimentary flow to suspended flow, the particle accumulation gradually decreases and the conveying efficiency is significantly improved. The particle slug greatly reduces the collision and friction between the internal particles and the pipe and reduces the crushing rate to a certain extent. When the conveying wind speed is about 23.2 m/s, there are almost no trapped particles in the pipeline, which can achieve rapid feed delivery, and conveying efficiency is greatly improved. Therefore, this paper provides a good theoretical basis for improving conveying efficiency and reducing crushing rate in the process of pneumatic conveying.

The use of oil–water rings has become an emerging, effective, and energy-saving method of transporting heavy oil. Maintaining the shape of the oil–water ring and preventing rupture during the transport of heavy oil are of great scientific significance in oil–water annular flow transportation. To ensure the oil–water ring passes smoothly through the elbow without rupture, this article proposes an asymmetrical magnetohydrodynamic (MHD) propulsion method to utilize the significant difference between the conductivity of heavy oil and electrolyte solution to achieve an accelerating effect on the outer water ring. The magnetohydrodynamic device designed by this method can generate a magnetic field and provide Lorentzian magnetic force to achieve the asymmetric acceleration of the oil and water rings, to homogenize the water ring velocity on the inner and outer elbows, to push the deviated oil core back to the center of the pipeline, and to repair the rupture of the water film. The flow state of the oil–water ring in the bend pipe under the joint action of the electric field and magnetic field is simulated by a differential MHD thick oil simulation flow model, which confirms that the device can realize the repair of the oil–water ring flow at the bend pipe and ensure that the oil–water ring flow passes through the bend pipe stably. Meanwhile, the effects of coil current, electrode plate voltage, and the conductivity of electrolyte solution on the morphology and velocity of the oil–water ring in the elbow are investigated. In addition, the role of the device in maintaining the morphology under different gravitational conditions is investigated. These results provide a reference design for related devices and offer a new approach to heavy oil transportation.