The process of extracting polyphyllin II and polyphyllin VII by water-assisted extraction was established and optimized in this study. Response surface methodology was used to establish a prediction model to optimize the extraction conditions. Based on the one-way test, the Box–Behnken design with three factors and three levels was used for the experimental program, and the composition analysis was carried out by high-performance liquid chromatography (HPLC). The optimal extraction conditions for polyphyllin II and polyphyllin VII were as follows: extraction time of 57 and 21 min, extraction temperature of 36 and 32 °C, solid-to-liquid ratio of 1:10 and 1:5 g/mL, respectively, and the yields of polyphyllin II and polyphyllin VII were 1.895 and 5.010%, which was similar to the predicted value of 1.835 and 4.979%. The results of the ANOVA showed that the model fit was good, and the Box–Behnken response surface method could optimize the water-assisted extraction of saponins from the leaves of Paris polyphylla var. yunnanensis. This study provides a theoretical basis for the application of polyphyllin II and polyphyllin VII in pharmaceutical production.

Lacquer trees are an important economic tree species in China, and raw lacquer is its main secondary metabolite. Polyphenolic compounds are the primary components of raw lacquer, among which diene urushiol exhibits high inhibitory activity against the reverse transcriptase of acquired immunodeficiency syndrome (AIDS). Therefore, this study established and optimized the ultrasound-assisted extraction process of diene urushiol from lacquer tree leaves. Based on single-factor experiments on the number of extractions, extraction time, extraction temperature, and solvent to solid ratio, the Box–Behnken Design response surface methodology was employed to obtain the optimal extraction process, which included three extractions, an extraction time of 55 min, an extraction temperature of 50 °C, and a solvent to solid ratio of 10:1 mL/g. Under these conditions, the content of diene urushiol was 4.56 mg/g (FW), which bore no significant difference from the theoretical value of 4.69 mg/g (FW), indicating a good model fit. Therefore, response surface methodology (RSM) can be used to optimize the extraction process of diene urushiol from lacquer leaves. This method lays a solid foundation for the comprehensive development and utilization of lacquer tree resources.