The Deep Cement Mixing Integrated Drilling, Mixing and Jetting (DMJ) technique has been developed through the installation of high-pressure spray holes at the mixing blades, with the objective of enhancing the bearing capacity of deep-mixed piles in the Yellow River floodplain. In order to enhance the bearing capacity of the foundation, variable-modulus piles and capped piles were incorporated within the DMJ piles. Engineering applications have demonstrated that DMJ piles can effectively address the issue of foundation reinforcement in the Yellow River floodplain region, minimize the wastage of cement, and reduce the environmental pollution associated with waste slurry. Nevertheless, a comprehensive study of the relevant factors is still lacking in the available literature. This study addresses this gap by conducting a numerical simulation of these two types of DMJ piles based on the preliminary field test data, with the objective of analyzing both the single-pile-bearing characteristics and the composite foundation-bearing characteristics. Furthermore, the study seeks to optimize the DMJ pile’s structure based on the simulation results. The findings demonstrate that the premature failure of a single pile during the bearing process can be averted if the modulus of the pile core reaches a minimum of 0.3 GPa or if the pile cap thickness exceeds 1 m. The utilization of large-diameter drilling, stirring and spraying piles can markedly enhance the bearing capacity of the composite foundation and mitigate the differential settlement of pile and soil. The spacing of the pile has been identified as a significant factor influencing the differential settlement of pile and soil. Consequently, this study also examines the impact of pile spacing on the differential settlement of piles and soil.

The Deep Cement Mixing Integrated Drilling, Mixing, and Jetting (DMJ) technique was innovatively developed by incorporating high-pressure jetting apertures into the mixing blades to enhance the bearing capacity of deep cement-mixed piles. In this study, the bearing characteristics of DMJ pile composite foundations under embankment loading are investigated using numerical simulation. Through comparative simulations involving various pile configurations, the results demonstrate that DMJ pile composite foundations exhibit significantly enhanced settlement control compared to conventional deep mixing piles. Notably, under identical area replacement ratios, the use of DMJ piles reduces total foundation settlement by approximately 30%. Furthermore, the findings indicate that larger pile diameters and smaller spacing are particularly effective in minimizing settlement. In terms of load transfer efficiency, DMJ piles are capable of transmitting embankment loads to depths of up to 15 m, surpassing the 10 m transfer depth observed in conventional pile systems. An analysis of excess pore water pressure further reveals that DMJ piles promote more effective dissipation, highlighting their superior performance in maintaining foundation stability under embankment loading.