This paper explores 6G technology for indoor positioning, focusing on accuracy and reliability using convolutional neural networks (CNN) with channel state information (CSI). Indoor positioning is critical for smart applications and the Internet of Things (IoT). 6G is expected to significantly enhance positioning performance through the use of higher frequency bands, such as terahertz frequencies with wider bandwidth. Preliminary results show that 6G-based systems are expected to achieve centimeter-level positioning accuracy due to the integration of advanced artificial intelligence algorithms and terahertz frequencies. In addition, this paper also investigates the impact of self-attention (SA) and channel attention (CA) mechanisms on indoor positioning systems. The combination of these attention mechanisms with conventional CNNs has been proposed to further improve the accuracy and robustness of localization systems. CNN with SA demonstrates a 50% reduction in RMSE compared to CNN by capturing spatial dependencies more effectively.
Accurate indoor localization is essential for Internet of Things (IoT) systems and autonomous navigation in the 6G communication system. However, achieving precision in environments affected by signal multipath effects and interference remains a challenge for 6G communication systems. We employ a Residual Neural Network (ResNet) augmented with channel and spatial attention mechanisms to enhance indoor localization performance using time-domain data. Through extensive experimentation, our models, when equipped with an attention mechanism, can achieve accurate location under 20% interference. Numerical results show that the ResNet with a Channel Local Attention Block (CLAB) can reduce the localization error by about 12% even when the interference is high. Similarly, the ResNet with a Spatial Local Attention Block (SLAB) can also improve the localization accuracy. While a ResNet combining both CLAB and SLAB can reduce the position error to about 7 cm.
The integration of electromagnetic imaging technology with the Internet of Things plays an important role in fields as diverse as healthcare, geophysics, and industrial diagnostics. This paper presents a novel two-step neural network architecture to solve the electromagnetic imaging for uniaxial objects which can be used in the Internet of Things. We incident TM and TE waves to unknown objects and receive the scattered fields. In order to reduce the training difficulty, we first input the gathered scattered field information into a deep convolutional neural network (DCNN) to obtain the preliminary guess. In the second step, we feed the guessed image into the convolutional neural network (CNN) to reconstruct high-resolution images. Our numerical results demonstrate the real-time imaging capability of our proposed two-step method in reconstructing high-contrast scatterers.
In this paper, three different deployment antenna arrays with circular, triangular and rectangular shapes were used to optimize the simultaneous wireless information and power transfer (SWIPT) system for the Internet of Things (IoT). Ray-tracing was employed to channel the model for a real environment. Self-adaptive dynamic differential evolution (SADDE) was used to optimize the harvesting power ratio with bit error rate constrained by the two different resolutions of feed length (high resolution and low resolution). Numerical results show that those three antenna arrays can achieve the goal for information quality in both resolutions. The harvesting power ratio for the circular array is the best and the harvesting power ratio for the rectangular array is the worst. The harvesting power ratio for the low-resolution case is 25% lower than the high-resolution case. However, the circular antenna array is the best deployment in those three different arrays for both high and low resolutions.