Microgrids are a key component in the evolution of the power grid. Microgrids are required to operate in both grid connected and standalone island mode using local sources of power. A major challenge in implementing microgrids is the communications and control to support transition from grid connected mode and operation in island mode. Here, we propose a secure communication architecture to support microgrid operation and control. A security model, including network, data, and attack models, is defined and a security protocol to address the real-time communication needs of microgrids is proposed. The implementation of the proposed security scheme is discussed and its performance evaluated using theoretical and co-simulation analysis, which shows it to be superior to existing protocols.

Demand response (DR) plays a key role for optimum asset utilization and to avoid or delay the need of new infrastructure investment. However, coordinated execution of multiple DRs is desired to maximize the DR benefits. In this study, we propose a hierarchical DR architecture (HDRA) to control and coordinate the performance of various DR categories such that the operation of every DR category is backed-up by time delayed action of the others. A reliable, cost-effective communication infrastructure based on ZigBee, WiMAX, and fibers is designed to facilitate the HDRA execution. The performance of the proposed HDRA is demonstrated from the power system and communication perspectives in a cosimulation environment applied to a 0.4 kV/400 kVA real distribution network considering electric vehicles as a potential DR resource (DRR). The power simulation is performed employing a real time digital simulator whereas the communication simulation is performed using OMNeT++. The HDRA performance demonstrated the maximum utilization of available DR potential by facilitating simultaneous execution of multiple DRs and enabling participation of single DRR for multiple grid applications.

In this paper we consider the problem of provisioning spare capacity in two-layer backbone networks using shared backup path protection. First, two spare capacity allocation (SCA) optimization problems are formulated as integer linear programming (ILP) models for the cases of protection at the top layer against failures at the bottom layer. The first model captures failure propagation using overlay information between two layers for backup paths to meet diversity requirements. The second model improves bandwidth efficiency by moving spare capacity sharing from the top layer to the bottom layer. This exposes a tradeoff between bandwidth efficiency and extra cross-layer operation. Next, the SCA model for common pool protection is developed to allow spare capacity sharing between two layers. Our previous SCA heuristic technique, successive survivable routing (SSR) is extended for these optimization problems. Numerical results for a variety of networks indicate that the common pool protection is attractive to enhance bandwidth efficiency without loss of survivability and that the SSR heuristic quickly results in near optimal solutions