Reconfigurable intelligent surfaces (RIS) is a promising solution to build a programmable wireless environment via steering the incident signal in fully customizable ways with reconfigurable passive elements. In this paper, we consider a RIS-aided multiuser multiple-input single-output (MISO) downlink communication system. Our objective is to maximize the weighted sum-rate (WSR) of all users by joint designing the beamforming at the access point (AP) and the phase vector of the RIS elements, while both the perfect channel state information (CSI) setup and the imperfect CSI setup are investigated. For perfect CSI setup, a low-complexity algorithm is proposed to obtain the stationary solution for the joint design problem by utilizing the fractional programming technique. Then, we resort to the stochastic successive convex approximation technique and extend the proposed algorithm to the scenario wherein the CSI is imperfect. The validity of the proposed methods is confirmed by numerical results. In particular, the proposed algorithm performs quite well when the channel uncertainty is smaller than 10%.

In this paper, we introduce an intelligent reflecting surface (IRS) to provide a programmable wireless environment for physical layer security. By adjusting the reflecting coefficients, the IRS can change the attenuation and scattering of the incident electromagnetic wave so that it can propagate in a desired way toward the intended receiver. Specifically, we consider a downlink multiple-input single-output (MISO) broadcast system where the base station (BS) transmits independent data streams to multiple legitimate receivers and keeps them secret from multiple eavesdroppers. By jointly optimizing the beamformers at the BS and reflecting coefficients at the IRS, we formulate a minimum-secrecy-rate maximization problem under various practical constraints on the reflecting coefficients. The constraints capture the scenarios of both continuous and discrete reflecting coefficients of the reflecting elements. Due to the non-convexity of the formulated problem, we propose an efficient algorithm based on the alternating optimization and the path-following algorithm to solve it in an iterative manner. Besides, we show that the proposed algorithm can converge to a local (global) optimum. Furthermore, we develop two suboptimal algorithms with some forms of closed-form solutions to reduce the computational complexity. Finally, the simulation results validate the advantages of the introduced IRS and the effectiveness of the proposed algorithms.

Internet-of-Things (IoT) is a promising technology to connect massive machines and devices in future communication networks. In this paper, we study a wireless-powered IoT network (WPIN) with short packet communication (SPC), in which a hybrid access point (HAP) first transmits power to the IoT devices wirelessly, then the devices in turn transmit their short data packets achieved by finite blokelgnth codes to the HAP using the harvested energy. Different form the long packet communication in conventional wireless network, SPC suffers from a transmission rate degradation and a significant packet error rate. Thus conventional resource allocation in the existing literature based on Shannon capacity achieved by infinite blocklength codes is no longer optimal. In this paper, to enhance the transmission efficiency and reliability, we first define effective-throughput and effective-amount-of-information as the performance metrics to balance the transmission rate and the packet error rate, and then jointly optimize the transmission time and packet error rate of each user to maximize the total effective-throughput or minimize the total transmission time subject to users’ individual effective-amount-of-information requirements. To overcome the non-convexity of the formulated problems, we develop efficient algorithms to find high-quality suboptimal solutions for them. Simulation results show that the proposed algorithms can achieve similar performances as that of the optimal solution via exhaustive search, and outperform the benchmark schemes.

In conventional dual-function radar-communication (DFRC) systems, the radar and communication channels are routinely estimated at fixed time intervals based on their worst-case operation scenarios. Such situation-agnostic repeated estimations cause significant training overhead and dramatically degrade the system performance, especially for applications with dynamic sensing/communication demands and limited radio resources. In this paper, we leverage the channel aging characteristics to reduce training overhead and to design a situation-dependent channel re-estimation interval optimization-based resource allocation in a multi-target tracking DFRC system. Specifically, we exploit the channel temporal correlation to predict radar and communication channels for reducing the need for training preamble retransmission. Then, we characterize the channel aging effects on the Cramer-Rao lower bounds (CRLBs) for radar tracking performance analysis and achievable rates with maximum ratio transmission (MRT) and zero-forcing (ZF) transmit beamforming for communication performance analysis. In particular, the aged CRLBs and achievable rates are derived as closed-form expressions with respect to the channel aging time, bandwidth, and power. Based on the analyzed results, we optimize these factors to maximize the average total aged achievable rate subject to individual target tracking precision demand, communication rate requirement, and other practical constraints. Since the formulated problem belongs to a non-convex problem, we develop an efficient one-dimensional search based optimization algorithm to obtain its suboptimal solutions. Finally, simulation results are presented to validate the correctness of the derived theoretical results and the effectiveness of the proposed allocation scheme.

In conventional full-duplex communications, dedicated symbols are transmitted to estimate both the self-interference channel and the desired signal channel in order to perform self-interference cancellation (SIC) and to coherently detect the desired signal. However, inaccurate channel estimation will produce residual self-interference and degrade the detection performance. In this paper, we exploit Gaussian mixture model (GMM) clustering to design a full-duplex transceiver (FDT), which is able to detect the desired signal without requiring digital-domain channel estimation and SIC. The frame structure of the designed FDT contains two successive phases: labelling phase and data transmission phase. In particular, the designed FDT performs cluster labelling in the labelling phase and performs GMM clustering based on expectation-maximization (EM) algorithm in the data transmission phase. Furthermore, the theoretical analysis about the detection performance, computational complexity and convergence performance for the designed FDT are studied. Finally, simulation results show that, the bit error rate (BER) of the designed FDT is closed to the performance of the FDT with a maximum likelihood (ML) detector and perfect channel knowledge, meanwhile is superior to the BER performance of the FDT with a ML detector and a least square (LS) or least mean square (LMS) channel estimator.