The development of cost-effective and highly sensitive hydrogen peroxide (H2O2) biosensors with robust stability is critical due to the pivotal role of H2O2 in biological processes and its broad utility across various applications. In this work, porous ceria hollow microspheres (CeO2-phm) were synthesized using a solvothermal synthesis method and employed in the construction of an electrochemical biosensor for H2O2 detection. The resulting CeO2-phm featured a uniform pore size centered at 3.4 nm and a high specific surface area of 168.6 m2/g. These structural attributes contribute to an increased number of active catalytic sites and promote efficient electrolyte penetration and charge transport, thereby enhancing its electrochemical sensing performance. When integrated into screen-printed carbon electrodes (CeO2-phm/cMWCNTs/SPCE), the CeO2-phm/cMWCNTs/SPCE-based biosensor exhibited a wide linear detection range from 0.5 to 450 μM, a low detection limit of 0.017 μM, and a high sensitivity of 2070.9 and 2161.6 μA·mM−1·cm−2—surpassing the performance of many previously reported H2O2 sensors. In addition, the CeO2-phm/cMWCNTs/SPCE-based biosensor possesses excellent anti-interference performance, repeatability, reproducibility, and stability. Its effectiveness was further validated through successful application in real sample analysis. Hence, CeO2-phm with solvothermal synthesis has great potential applications as a sensing material for the quantitative determination of H2O2.
An environmentally friendly, solvent-free/catalyst-free method was used to prepare soy-castor oil based polyols (SCPs) from epoxy soybean oil and castor oil. Thereafter, a series of hybrid polyurethanes using SCPs as feedstocks were synthesized with the introduction of double-decker silsesquioxane. Double-decker octaphenylsilsesquioxanetetraol (DDSQ) was prepared and characterized by 1H NMR and MALDI-TOF-MS. Meanwhile, the soy-castor oil based polyols (SCPs) were also characterized by 1H NMR and FTIR. Other characterizations such as DMA, TGA, SEM, FTIR, XRD, static contact angle and tensile test techniques were also applied to investigate the structures and properties of the hybrid polyurethanes. 1H NMR spectra indicated that DDSQ was accessed in the form of chemical bonding sealing on polyurethane pre-polymers. DMA analysis demonstrated that the hybrid polyurethanes with DDSQ displayed enhanced glass transition temperatures (Tg) compared to the pure polyurethanes. The DDSQ-containing hybrid polyurethanes exhibited improved thermal stability in terms of thermogravimetric analysis (TGA). SEM revealed that both nano- and micro-sized DDSQ aggregates were shown to be dispersed heterogeneously in the polyurethane matrix. The results of XRD showed that DDSQ formed a nanocrystalline phase in any of the PUs. With the inclusion of DDSQ, the hydrophobicity of the hybrid material was significantly improved, as the results of the static contact angles revealed.
Presently, it is necessary to develop fully flexible sensors for the next generation of wearable electronics, and in this case, hydrogel-based flexible sensors are highly attractive due to their unique mechanical performances. However, the low-temperature freezing and bending fatigue of hydrogels severely hinder their application in flexible sensors. Herein, a polymeric dual-function hydrogel (DF-hydrogel) integrating self-healing and anti-freezing properties was prepared by building a dual dynamic network for application as ionic skin with excellent and reliable sensing performances. In DF-hydrogel, ethylene glycol (EG) and disulfide bonds were anchored in the molecular structure of double-bond-capped water-based polyurethane crosslinkers (DB-waPU) and subsequently introduced into the molecular backbone of the hydrogel via free radical polymerization. A multi-hydrogen bonding network was formed by the copolymerization of acrylamide with 2-ureido-4[1H]-pyrimidinone (UPy)-functionalized 1-vinylimidazole ionic liquid. Due to the dual dynamic network, DF-hydrogel exhibited exceptional self-healing capabilities and mechanical properties such as high healing efficiency, stretchability, compressibility, and self-adhesion. The anchored EG molecule in the polymer backbone endowed the hydrogel with intrinsic freeze-resistance without compromising its mechanical properties. The introduced poly(ionic liquid) provided free ions to the hydrogel, enhancing its ionic conductivity up to 9.6 mS cm−1 in the absence of applied electrolyte salts. The DF-hydrogel-based ionic skins exhibited rapid, reversible, and dependable resistance changes with a wide range of strain sensing capabilities (10–300%). Moreover, a prototype 2D sensor array was fabricated to detect strains or pressures in two dimensions, strongly showing potential for the preparation of electronic skin, touch-pads, biosensors, and other applications.