Xiangci Xue

Dr. Xiangci Xue


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 December 2024 in Metals
Verified
Journal Article
Open access
PDF file
QSQingshi Song
Qingshi Song
XXXiangci Xue
Xiangci Xue
DZDeqing Zhu
Deqing Zhu
The carbon emissions from the pelletizing process are much lower than those from the sintering process. Moreover, increasing the proportion of fired pellets in the feedstock fed into the blast furnace can reduce carbon emissions, augment the capacity (the ability of a blast furnace to produce molten iron using the same weight of iron ore) and decrease slag generation. Therefore, much more attention has been paid to the pelletizing process. However, the shortage of high-quality feeds remains a bottleneck in the pelletization industry. Supplying more hematite for fired pellet production is of significant importance. In this study, the physicochemical properties and mineralogical characteristics of Brazilian hematite concentrate (BHC) were systematically analyzed. We simulated the traveling grate process and investigated the effect of BHC dosage on the balling behavior of mixed concentrates, the firing performance of the dry balls and the metallurgical properties of the fired pellets. The results indicate that substituting 20–30% BHC with magnetite concentrates improves the drop number and thermal stability of green balls with a slightly higher dosage of bentonite. The firing characteristics of the dry balls and the reduction index and reduction degradation index of the fired pellets were enhanced, although a slightly adverse effect on the reduction swelling index of the fired pellets was observed. Overall, the mechanical and metallurgical properties of the fired pellets can meet the requirements for blast furnace operations. Substituting magnetite concentrates with 20–30% hematite concentrate in the traveling grate for the pelletization process is technically feasible.

10 March 2026 in Metals
Verified
Journal Article
Open access
PDF file
MGMinglei Gao
Minglei Gao
XXXiangci Xue
Xiangci Xue
DZDeqing Zhu
Deqing Zhu
LLLanjie Li
Lanjie Li
HJHeng Ji
Heng Ji
ZWZhonghua Wang
Zhonghua Wang
The growing demand for direct reduced iron (DRI) in green steel production requires high-quality fired pellets as the burden for the gas-based shaft furnace direct reduction process. However, the properties of magnetite concentrate as pellet feed present a significant impact on the quality of fired pellets, especially the metallurgical performance. A systematic study of the effect of pretreating the magnetite concentrate on the properties of fired pellets was conducted using two pretreatment technologies, i.e., damp-milling and high-pressure roll grinding (HPRG). Green balls were made from pretreated magnetite concentrates and fired under optimal conditions. Their performance was then evaluated in a laboratory-scale setup simulating the HYL shaft furnace environment. Key metrics included cold compressive strength (CCS), reducibility index (RI), reduction swelling index (RSI), and dynamic low-temperature reduction degradation (LTD). The pretreatment of magnetite concentrates with HPRG twice showed significant benefits. The fired pellets not only have a CCS of 2500 N/p at a roasting temperature 150 °C lower, but also achieve an RI of 3.37 and an RSI of 3.15%, respectively. Furthermore, the reduction degradation tendency was markedly reduced; the +6.3 mm fraction reached 94.72% with a whole pellet ratio of 75.49%. Conversely, while damp-milling improved the LTD, it required a 100 °C increase in preheating temperature and yielded a whole pellet ratio of only 49.15%, failing to meet industrial requirements. The improvement in metallurgical performance is attributed to the intense micro-cracking induced by the two-pass HPRG process, which optimizes the particle size distribution, specific surface areas and improves the microstructure and pore properties of the fired pellets.

2 April 2026 in Metals
Verified
Journal Article
Open access
PDF file
MGMinglei Gao
Minglei Gao
XXXiangci Xue
Xiangci Xue
DZDeqing Zhu
Deqing Zhu
LLLanjie Li
Lanjie Li
HJHeng Ji
Heng Ji
ZWZhonghua Wang
Zhonghua Wang
The advancement of green and low-carbon transition in the steel industry has increased the demand for high-quality direct reduced iron (DRI) as a premium feedstock for electric arc furnace steelmaking. This imposes stricter quality requirements for fired pellets utilized in gas-based shaft furnace processes. To address the poor low-temperature reduction degradation (LTD) of fired pellets produced from a single high-grade magnetite concentrate during gas-based direct reduction. This study investigates the effects of blending hematite concentrates into a magnetite concentrate base (with additions of 0, 20 wt.%, 30 wt.%, and 40 wt.%) on the characteristics of the mixed concentrates, green ball properties, firing performance, and the metallurgical performance of the resulting fired pellets under conditions simulating an HYL shaft furnace. The results indicate that the incorporation of hematite concentrate optimizes the overall particle size distribution and green ball properties. As the hematite proportion increases, the optimal preheating temperature for green balls rises, while the required roasting temperature decreases. The most significant reduction in roasting temperature, from 1225 °C to 1175 °C, is achieved with a 20 wt.% hematite addition. Regarding metallurgical properties, the addition of hematite has a minor effect on the reducibility index (RI) but substantially improves the reduction swelling index (RSI). A notable decrease in the RSI is observed at addition levels of 30% and above. Critically, the LTD is significantly enhanced. The optimal improvement is attained with a 20 wt.% hematite blend, resulting in a- LTD+6.3 mm fraction of 97.48 wt.%, a- LTD−3.2 mm fraction of only 2.18 wt.%, and a whole pellet ratio of 88.01% after reduction. Considering the comprehensive performance, a blend of hematite concentrate between 20 wt.% and 30 wt.% yields fired pellets with superior characteristics, meeting the production requirements for gas-based shaft furnace direct reduction processes. This study provides an effective technological pathway for producing high-performance DRI-grade pellets from high-grade magnetite concentrates, contributing to the green and low-carbon transformation of the iron and steel industry.