Accurate and rapid measurement of ventilation resistance is crucial for achieving effective real-time airflow control in underground ventilation systems. Conventional measurement methodologies are frequently constrained by operational inefficiency and substantial measurement inaccuracies. To overcome these limitations, this study proposes an innovative approach employing fractal theory to quantify roadway surface roughness and determine ventilation resistance parameters. The surface roughness characterization utilizes two fractal descriptors: fractal dimension (D) and scale parameter (C). Through systematic experimentation and computational fluid dynamics (CFD) simulations of rough-walled pipe flows, a novel ventilation resistance prediction model has been established. The validation process incorporates comprehensive field data acquired from operational roadways in the Kailuan full-scale roadway. The three-dimensional (3D) laser scanning technology was implemented to obtain high-resolution point cloud data of roadway surfaces, enabling precise calculation of fractal roughness parameters. Comparative analysis reveals a maximum deviation of 8.68% between CFD simulation results and the proposed model's predictions. Furthermore, the relative error between the novel computational conventional field measurement techniques was reduced to 2.36%. These findings substantiate the technical validity of the proposed methodology and confirm its capability to effectively quantify the impact of 3D surface roughness characteristics on ventilation resistance dynamics.
18 April 2018 in Geotechnical and Geological Engineering
As an important phenomenon in the evolution of fire, the ghosting flame exhibits dynamic and irregular behavior in environments with limited ventilation. By ghosting flame, we mean the phenomenon where the flame separates from the fuel surface under certain conditions. This study investigates the combustion characteristics of the ghosting flame in pool fires within a coal mine dead-end roadway by small-scale experiments. Results indicate that the ghosting flame appears more readily and earlier when the fire source is closer to the heading face or when the oil pan size is larger. Additionally, the fire source's location significantly influences the type of ghosting flame observed. When the fire source is near the heading face, the flame predominantly exhibits horizontal-type ghosting flame; however, when the fire source is at the entrance of the roadway, only the edge-type ghosting flame occurs. Furthermore, dead-end roadway fires easily transition to ventilation-controlled conditions, leading to a continuous increase in the mass loss rate. The occurrence of a ghosting flame does not result in a sudden change in the mass loss rate. Moreover, the transient oxygen volume fraction when the ghosting flame occurs is related to the ghosting flame type and is also affected by ventilation conditions, fuel types, roadway structure, and the location of measurement points. Importantly, the root cause for the occurrence of the ghosting flame lies in the pressure differential generated by the temperature disparity between the two sides of the fire source.
26 May 2020 in Journal of Energy Resources Technology
The goaf in coal mines is composed of loose media formed by fragmented coal and rock, and the explosion characteristics of gas within such loose media differ significantly from those in free spaces. In this paper, methane explosion experiments in loose media were conducted to investigate the influence of porosity on the explosion characteristics of methane. The results indicate that under the current conditions, the inhibition rate of explosion pressure and pressure rise rate by the porosity of the loose media generally follow an exponential decay trend. At a porosity of approximately 0.567, the loose media changes from inhibiting to promoting the pressure rise rate generated by the explosion. At a porosity of approximately 0.613, the loose media shifts from inhibiting to promoting the explosion pressure of methane, and the exponential decay relationship between pressure decay rate and porosity may be disrupted. Heat loss and turbulent disturbances are important factors affecting the explosion characteristics of methane in loose media. When the effect of heat loss exceeds that of turbulence disturbances, the loose media significantly suppress the methane explosion; compared to methane explosions in a cavity, the overpressure peak is reduced by 81.82% –93.14%. Conversely, when turbulent disturbances are the primary influencing factor, the loose media can promote the methane explosion reaction process; in loose media with a porosity of 0.602, the maximum rate of pressure rise of the methane explosion is 134.96% higher than that in a cavity, and the deflagration index is 99.43% higher.