Hua Liang

Hua Liang


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 November 2024 in Coatings
Verified
Journal Article
Open access
PDF file
HLHua Liang
Hua Liang
XSXiaolong Shi
Xiaolong Shi
YLyanzhou li
yanzhou li
With the rapid development of marine engineering, effective antifouling and anti-corrosion technologies are essential for ensuring the safety and longevity of marine facilities. This review synthesizes current research on various coating technologies designed to combat marine biological fouling and corrosion. It analyzes the causes of marine biological fouling and corrosion, discusses their potential impacts on the safety of ships and marine structures, and emphasizes the need for effective protective systems. The review covers current antifouling coating technologies, including the preparation of low-surface-energy coatings, conductive coatings, biomimetic coatings, polysiloxane coatings, polyurea coatings, epoxy coatings, polyurethane coatings, and high-entropy alloy coatings. Anti-corrosion coatings are also discussed, with a focus on the characteristics of epoxy, polyurethane, and polyurea coatings, as well as metal-based coatings, alongside their corrosion resistance in marine environments. Based on existing research, the review summarizes ongoing challenges in marine antifouling and anti-corrosion coating technologies, and offers perspectives on future research directions and technological developments.

15 November 2024 in Coatings
Verified
Journal Article
Open access
PDF file
XSXiaolong Shi
Xiaolong Shi
HLHua Liang
Hua Liang
YLyanzhou li
yanzhou li
Marine biofouling presents numerous challenges, including increased drag, reduced efficiency, and ecological imbalance. This review presents an overview of recent advances in antifouling coatings. First, essential preparation techniques such as cold spray, plasma spray, magnetron sputtering, and laser cladding are introduced, including the specific characteristics of each method. Next, the antifouling performance of Cu-doped and Ag-doped coating is analyzed. Emphasis is placed on the differences in coating composition, preparation methods, and their effects on antifouling and anticorrosion properties. The future development of antifouling technologies is also discussed, emphasizing the creation of multifunctional coatings, the optimization of coating microstructures for better performance, and the advancement of sustainable materials to minimize environmental impact.

15 March 2025 in Coatings
Verified
Journal Article
Open access
PDF file
XSXiaolong Shi
Xiaolong Shi
HLHua Liang
Hua Liang
YLyanzhou li
yanzhou li
This study examines the microstructure and corrosion resistance of FeCrNiAl0.7Cu0.3Six (x = 0, 0.1, 0.3, and 0.5) high-entropy alloys (HEAs) in a 3.5% NaCl solution. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and electrochemical testing were employed to systematically analyze the alloys’ microstructures and corrosion behavior. The XRD results indicate that the addition of Si affects the phase structure of the alloy. At Si = 0, the alloy exhibits a single BCC phase. By increasing the Si content to 0.1 and 0.3, a BCC2 phase appears. At Si = 0.5, Si-containing intermetallic compounds form. SEM observations reveal that as the Si content increases, the alloy develops a distinct dendritic structure. Polarization tests in the 3.5% NaCl solution show that the corrosion current density first decreases and then increases with increasing Si content. At Si contents of 0.1, 0.3, and 0.5, the corrosion current densities are 4.275 × 10−6 A·cm−2, 4.841 × 10−7 A·cm−2, and 2.137 × 10−6 A·cm−2, respectively. FeCrNiAl0.7Cu0.3S0.3 HEA exhibits the lowest corrosion current density, indicating a lower corrosion rate. Electrochemical impedance spectroscopy (EIS) tests show that at Si = 0.3, the alloy has the largest capacitive arc radius. The charge-transfer resistance (RCT) for the alloys with the Si contents of 0.1, 0.3, and 0.5 are 2.532 × 105 Ω·cm2, 4.088 × 105 Ω·cm2, 4.484 × 105 Ω·cm2, and 2.083 × 105 Ω·cm2, respectively. FeCrNiAl0.7Cu0.3Si0.3 HEA has the highest RCT, which indicates a more stable passivation film and better resistance to chloride ion intrusion. The corrosion morphology observed after polarization testing shows that all alloys exhibit intergranular corrosion characteristics. The Si content alters the distribution of passivation film-forming elements, Cr and Ni. Compared to other alloys, the corrosion morphology of FeCrNiAl0.7Cu0.3Si0.3 HEA is more complete. Combining the polarization, EIS, and corrosion morphology results, it can be concluded that FeCrNiAl0.7Cu0.3Si0.3 HEA exhibits the best corrosion resistance in the 3.5% NaCl solution.

26 March 2025 in Coatings
Verified
Journal Article
Open access
PDF file
HLHua Liang
Hua Liang
XSXiaolong Shi
Xiaolong Shi
YLyanzhou li
yanzhou li
To address the challenge of achieving an optimal balance between strength and toughness in ultra-high-strength steel welds, this study investigates ultrasonic vibration-assisted laser-arc hybrid welding. The influence of ultrasonic vibrations, applied to the lower surface of laser-arc hybrid welding specimens at powers ranging from 60 W to 240 W, on various aspects of the weld, including macroscopic morphology, porosity, microstructure, and mechanical properties, was systematically examined. Experimental findings reveal that as ultrasonic power increases, weld porosity initially diminishes before rising again. Simultaneously, the fusion ratio of the weld gradually enhances, and the cross-sectional morphology of the weld transforms from a “goblet” shape to an “inverted triangle”, with the transition boundary between the arc zone and laser zone becoming less distinct. Furthermore, an increase in ultrasonic power leads to a gradual rise in the microhardness of the weld, and the mechanical properties of the weld joint exhibit an upward trend. Notably, at an ultrasonic power of 180 W, the weld attains a tensile strength of 1380 MPa and an impact toughness of 10.5 J, highlighting the potential of this technique in optimizing the welding characteristics of ultra-high-strength steel.